2024 Kawasaki ZX-6R - Tips For More Power!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 เม.ย. 2024
  • #zx6r #kawasaki #dynotune
    Ready to WAKE your bike up? Give us a call to discuss your power options. 727-256-0001.
    Today we take in a new 2024 ZX6r. But not just any zx6r, this one has been upgraded with a few stunt bike goodies. Including the upright bars, stunt cage and tail. If this customer plans on doing some stunt riding, a custom tune should definitely help with the smoothness when doing so. In order to achieve these numbers, this customer wanted to add the sprint p08 filter and drilled out the cat. This along with the Akrapovic exhaust and link pipe he already installed really opened this bike up to help it breath better. Not to mention the zx6r exhaust sound clips sounds sooo much better now! This thing sounds great at all rpm ranges. Once we took care of those little things, we put it on the dyno to see just how much power we can pull out of this bad boy. After looking at the final graphs, it's pretty clear that a custom dyno tune on your motorcycle after an exhaust is a MUST. Sure you may be able to get away without, but your motorcycle is going to run a little rough and not efficiently after doing a slip on exhaust. That's why we always recommend doing a ecu flash and tune.
    Now that euro5 emissions have hit the 600cc lineup, will they last in the US market? Can you tune a 600cc motorcycle?
  • ยานยนต์และพาหนะ

ความคิดเห็น • 27

  • @jasonmekush5280
    @jasonmekush5280 2 หลายเดือนก่อน +6

    im former customer of yours. u guys did great work. BeCareful talking about drilling cats epa will shut u down . they did it to diesel tuners 86n dpf systems. 25000.00 fine apiece.

    • @provenpowercycles
      @provenpowercycles  หลายเดือนก่อน +3

      Fuuuuuccckkk yeah we will omit that in the future 🤙

  • @K-carbon
    @K-carbon 2 หลายเดือนก่อน +1

    We need a shop like you guys in Ireland yous do great work and take great pride passion in the work you do for your customers
    Enjoys the video keep em coming

    • @provenpowercycles
      @provenpowercycles  หลายเดือนก่อน

      We appreciate the good words! 💪 I'm sure there is some shop out there that does great stuff, just haven't found them yet 🤙

  • @thomasdearing7718
    @thomasdearing7718 2 หลายเดือนก่อน +2

    Good job! That bike will be a screamer!

  • @supaxr
    @supaxr 2 หลายเดือนก่อน +1

    great video holy moly that kawi sounds insane 😮

    • @provenpowercycles
      @provenpowercycles  หลายเดือนก่อน

      We love it! The video did it NO justice! In person it was about 1000 times better!

  • @SKEEZOTHEREALSKEEZO
    @SKEEZOTHEREALSKEEZO 2 หลายเดือนก่อน +2

    Guys did a great job. Wish I could get my bike at that shop

  • @davidlagno7717
    @davidlagno7717 หลายเดือนก่อน +3

    That's pretty awesome. 50ft/lb of tq! People think and say they're getting 128hp to the wheel are either misinformed or really full of $hit. You guys really are ontop of the dyno game❤

    • @provenpowercycles
      @provenpowercycles  5 วันที่ผ่านมา

      We got 127whp out of one recently. I'd love to get one and really teat the limits and pull low 130s out of it! 💪💪💪
      But we appreciate the compliment 🙌🙌

  • @dg8062
    @dg8062 2 หลายเดือนก่อน +1

    Wow, looks like older zx6's put out a little more powa!

  • @naception
    @naception 7 วันที่ผ่านมา +1

    I got a 40th anniversary zx6r. I have a 3/4 system installed (yoshimura at2). Much like the one in this video. Breather box was removed with a link pipe to replace it. What do I need to do to decat?
    Also is that the impack tech cage? Do you have to cut the fairings to install that?

    • @provenpowercycles
      @provenpowercycles  5 วันที่ผ่านมา

      We did not install cage, the owner did so I'm not sure on that one. If you still have the stock header then more than likely you still have the cat. There are a few methods to removing the cat, we opt to drill them out as of now and it's a bitch! It's not complicated all in all just a very labor intensive project lol just be ready for a couple of hours of cussing and throwing stuff 😆

  • @michaelanthony8638
    @michaelanthony8638 หลายเดือนก่อน +1

    Hey great content enjoy your site I jusy layed down my 2024 Hayabusa broke clip on bars and bracket that holds them on having trouble fine new replacement parts wondered if you would like to sell the stock clip ons and bracket you removed from your You Tube video How to lower your gen 3 Hayabusa or if you know any one that would have these parts to help me out please let me know. Thanks Mike

    • @provenpowercycles
      @provenpowercycles  หลายเดือนก่อน

      Hey Mike ! We still have the oem ones we can sell ya. Give us a call at 727-256-0001 tomorrow if you are still wanting them 🤙

  • @TGJaws
    @TGJaws 2 หลายเดือนก่อน +1

    How does this bike compare to the full M4 exhaust bike that you tuned?
    I have a 2024 ZX6R and am curious to know how you are seeing the factory header compared to a non-restrictive header like the M4.

    • @provenpowercycles
      @provenpowercycles  2 หลายเดือนก่อน +1

      M4 is a great system as well. Usually it will be similar top end power but the overall powerband will be better with the full systems

    • @footballa57
      @footballa57 20 วันที่ผ่านมา

      This is exactly the information i was looking for. So do you think the full exhaust is worth it or not worth it for the big price tag?

  • @wrecking_havoc586
    @wrecking_havoc586 หลายเดือนก่อน

    My 2024 zx6r dyno at 119 after the ECU flash

    • @footballa57
      @footballa57 20 วันที่ผ่านมา

      Any other mods? Air filter, exhaust, etc?

    • @wrecking_havoc586
      @wrecking_havoc586 20 วันที่ผ่านมา

      @@footballa57 Black Widow Full Exhaust and DNA Air Filter.

  • @jasonmekush5280
    @jasonmekush5280 2 หลายเดือนก่อน +1

    110 thats it ? man my 04 gixxer 600 w 4 parts did 104 back in 2004. Well i see why ppl trade then it on post 1000 bikes.

  • @clutchpack1969
    @clutchpack1969 หลายเดือนก่อน

    Stupid phone mounts.... why

  • @De_Leon_Records
    @De_Leon_Records 2 หลายเดือนก่อน +1

    Bar Risers 🤮😅