The part number on the serpentine belt didn't work on my k24a2. I did the exact same setup, and the belt was long. Had to get a 680K7 but over nice guide
Hey bro will the rbc water pump and hosuing work unstead of the prb water pump and housing i cant find any information on forms my prb hosuing is cracked and was wondering if the rbc hosuing and pump work ? Thank you
Yo, @Rarewitit exactly where I'm at! Quick question, what did you do with that little vacuum hose off the top of the intake by that blockoff plate? Just plug it?
ok i got a base 2002 rsx and just trying to get an absolute answer k20a3 waterpump manifold and accessories ie powersteering alternator ep3 pulley ac compressor and a tsx belt?
Water pump you using the k20 one with the black peice in the side and the pipes for the k24 correct ? Because I want my car have AC and power steering too
as long as you have matching fly wheel and clutch your fine, I have a k24a with 5speed with a type s fly wheel and 6 speed clutch. so as long as you by a kit that comes with a fly wheel your good
I hope u answer me this question long shot bro I am from California I don’t what to deal with California emission test my question is will u set up will pass California emission test please let me know I will love to have a swap like ur on my car
Your videos are definitely the most clear and straight forward.
Thank you I appreciate it
Hell yea been waiting for this upload
Very nice bro big like 👍
best videos out for this thank you🙏
Thank you for watching I appreciate it
This video was very informative. Thank you!
Appreciate you watching
Watched ALL ads for you bro
Thank you bro I truly appreciate it
Always good content
Thx bro
The part number on the serpentine belt didn't work on my k24a2. I did the exact same setup, and the belt was long. Had to get a 680K7 but over nice guide
If you didn’t use Rsx parts it’s different
My guyyy 💪🏼 good work as always . what’s the sensor you replaced in the side of the engine ?
Thank you I appreciate it , the side sensor is the vtc actuator
Good job good job 🚘😎cool 😊
Thank you
@@rarewitit7899 😀😎👍
Hey bro will the rbc water pump and hosuing work unstead of the prb water pump and housing i cant find any information on forms my prb hosuing is cracked and was wondering if the rbc hosuing and pump work ? Thank you
Yea it works
Yo, @Rarewitit exactly where I'm at! Quick question, what did you do with that little vacuum hose off the top of the intake by that blockoff plate? Just plug it?
Yea I just got a vacuum cap to block it off
Thanks bro, I figured out the other ones so I wasn't sure on that one!
@@kseries20-24only bbdkbfoelbcfwixbkfkvjd
ok i got a base 2002 rsx and just trying to get an absolute answer k20a3 waterpump manifold and accessories ie powersteering alternator ep3 pulley ac compressor and a tsx belt?
If your using power steering , no need for the ep3 pulley ,just k20a3 water pump assembly alternator , tensioner and power steering with tsx belt
@@rarewitit7899😢😢
What do you do with the extra hose that came on the rsx intake that goes into the water neck you replaced
I capped it with a vacuum cap
I have a coolant leak from the water pump for the oil cooler set up am I able to block that?
Yea ktuned sells one
Water pump you using the k20 one with the black peice in the side and the pipes for the k24 correct ? Because I want my car have AC and power steering too
Base Rsx
@@rarewitit7899 so you using the water pump housing and the water pump from k20 base engine ?
What water pump and water pump housing did you use? The k20 or k24?
K20
💯
do you need to install a pilot bearing for the input shaft? Also, do you need to program the ECU after swapping the engine?
Yea you have to do both
So the knock sensor has to be from a k20?
If your running type s harness yes , if your running base Rsx harness then no
Can you show how to swap out the plug for the starter?
I’m new to this so I’ve been watching your channel
I just cut it and heat shrink but i will show on next k24 this weekend
6 speed flywheel won't fit 5 speed trans
What's the difference?
The 5 speed flywheel and 6 speed flywheel have different bolt patterns , so the clutch on 5 speed will not 6 speed flywheel vise versa
@rarewitit7899 okay cool making sure I didn't install the wrong one lol but sounds like we good because everything bolted on
as long as you have matching fly wheel and clutch your fine, I have a k24a with 5speed with a type s fly wheel and 6 speed clutch. so as long as you by a kit that comes with a fly wheel your good
I hope u answer me this question long shot bro I am from California I don’t what to deal with California emission test my question is will u set up will pass California emission test please let me know I will love to have a swap like ur on my car
I can set up your car for bard swap , Honda.mike1988@gmail.com or Instagram Rwi built
😎👊
What’s the part number for the engine mount bro?
04 crv
@@rarewitit7899 I said that but it doesn’t look like yours it’s like a circle idk if I have to say aside mount?
That’s the mount you need the bracket