How to install a 2014-2019 Toyota Highlander fender
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Learn how to install your Highlander fender. There are a couple hidden bolts but we'll show you where. Part 1 link is below!
Purchase the fender here: bit.ly/14-19_Highlander_Fender
Website: www.revemoto.com
0:00 Start
0:38 Intro
1:16 Mount the fender, check the spacing
4:34 Secure the fender with the bolts
5:26 Top fender bolts
7:57 Fender nose and bumper bracket/retainer
11:42 Door bolt
11:56 Insert the plastic fender spacer
13:40 Install the fender molding
14:25 Lower fender bolts install
15:37 Install the mudflap
16:52 Outro
Thank you for watching our Toyota Highlander fender replacement video. Toyota really went above and beyond when assembling this fender. It has a lot of bolts and in some places, is hard to reach. Worry not, we are here to help you and show you how to get this fender off. Toyota did try and make this a bit more difficult compared to how easy the rest of their cars are to work on. Let's get right into it!
TOOLS NEEDED:
You will need a flat-head screwdriver or panel clip removal tool for the plastic push-pins and clips. You will need a 10mm wrench or socket wrench with an extension.
PROCESS:
The process is very easy but it can be a bit tricky with the inner fender. You want to start by mounting the fender onto the car. Slide it in towards the door and drop it onto the hood side last. You'll want to put in a couple bolts so the fender holds. We're going to be checking the fender spacing or placement and you don't want the fender falling down. You'll want to watch the door spacing first, make sure that when you open or close the door, it does not rub the fender. Once you get a good spacing insert a couple of the top bolts to hold it in place. Check the hood spacing next. Once that is to your preference, start inserting all the bolts. You can start anywhere but we did so on top. and moved our way to the bottom. When you get to the fender nose, be sure to insert the bolts before you snap on the bumper retainer or bracket. You'll have a hard time if you don't, that plastic bracket won't sit right. Make sure the inside bolt or the bolt behind the fender line is in before you insert the plastic piece. The side with the markings or print faces towards the tire or bumper. Snap that in and secure it with the plastic pins. Now you can secure the fender liner and fender molding. These are held on by plastic push-pins and are easily inserted. If you need new clips, you can get them from your dealership for a few dollars each. Snap the mudflap in and you are all set and good to go!
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
_____________________________________
#toyota #highlander #toyotahighlander #howto #revemoto #paintedautoparts #onlinepaintedparts #diyproject #diy #automotive #howto
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
👍
Thank you for watching and please subscribe! 🤘
Am I able to pick up or do all parts HAVE to be shipped?
You can definitely pick up the parts. There is an option at checkout and you can always call us, or chat with us online. Thank you for watching.