How to Replace Front Bumper Cover 2014-2019 Toyota Highlander

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/59/b6/bumpers-and-parts
This video shows you how to install a new front bumper cover from TRQ on your 2014-2019 Toyota Highlander. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This process should be similar on the following vehicles:
2014 Toyota Highlander
2015 Toyota Highlander
2016 Toyota Highlander
2017 Toyota Highlander
2018 Toyota Highlander
2019 Toyota Highlander
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obmv/1AXAA00013
• Phillips Head Screwdriver 1aau.to/obmv/1AXAA00013
• 10mm Wrench 1aau.to/oWT/1AXAA00010
• 10mm Socket 1aau.to/obdq/1AXAA00017
• Circlip Pliers
• Ratchet 1aau.to/obDg/1AXAA00016
• Gloves 1aau.to/oabu/1AXSS00048
• Painter's Tape
• Safety Glasses 1aau.to/o4F/1AXAA00343
• Pick 1aau.to/oQq/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@williamphillips3809]

Excellent detail of every step. Very helpful!! Thank you!

[@flyingRich]

Thanks for the video!

[@JoseHernandez-qk4ff]

Can this be done without removing the entire bumper and just lifting the car up with a jack?

[@FORTHEPEOPLE6870]

Does not go that easy. Wished it did. Especially replacing new parts. I like the in-depth on the Video.
Tabs tend to break easily on the new Parts. The parts are very hard to snap together. Also You have to keep the plastic parts warm while doing this. If it is cold it will be much harder and plastic parts break. I prefer that everything screwed together. Just saying.