so the first mark is just a reference point to make your second measurement off of, and I'm pretty sure you want to come back far enough to stay out of that 90. First time I ever seen anyone do one with a pattern where they actually measured lol. A Gooseneck is very close to the same. I like your way, though, you actually show how to come down to a controlled height to connect to your box. thanks for giving me the link!
Just over bend the 90 then find your measurement you need to your coupling, subtract 12” from your mark and bend 22.5, works like a charm almost every time
That would be great, however where I work they would fire immediately if I were to record it and post it. That's about the only place I could. But would make for a great video for sure
I think the only reason you were an 1/8th short is your 90 was just a but over bent. I think if you were to pull it back out a bit it would be dead on! that's a great bend. Thanks for sharing it!
Please keep making conduit bending videos they are helping so much !
Definitely I appreciate you watching and commenting ☺
I had a foreman on a job a few years ago show me the wire trick. It really is a handy tool you can throw in your bag!
Absolutely
so the first mark is just a reference point to make your second measurement off of, and I'm pretty sure you want to come back far enough to stay out of that 90. First time I ever seen anyone do one with a pattern where they actually measured lol. A Gooseneck is very close to the same. I like your way, though, you actually show how to come down to a controlled height to connect to your box. thanks for giving me the link!
My pleasure and yes you definitely need to stay out of the 90
Just over bend the 90 then find your measurement you need to your coupling, subtract 12” from your mark and bend 22.5, works like a charm almost every time
I agree but like anything if you get it down there is no waste. Not knocking your method though. Thanks for the comment and watching ☺
EXCELLENT CHANNEL!!!
Appreciate that ☺
Love your vids!!!
I really appreciate you watching. Have a great day ☺
Do you think that you might be able to do a
Video on working in switchgear and or racking in breakers in switchgear?
That would be great, however where I work they would fire immediately if I were to record it and post it. That's about the only place I could. But would make for a great video for sure
How would you bend a back to back 90 to get around a gutter if the soffit is let’s say 12 inches
Are you trying to go over it? Sound like you need a 3 point saddle
How would you put a 3/4" offset on the end of that Shepards hook.
Do you mean on the end of the 90
I think the only reason you were an 1/8th short is your 90 was just a but over bent. I think if you were to pull it back out a bit it would be dead on! that's a great bend. Thanks for sharing it!
I appreciate it and your probably exactly right.
Do you think you could talk about some industrial work?
Tell me some things that you might want me to talk about
Where do you add the shrink? the first bend in the offset?
To the whole measurements
@@MountaineerOutdoorsi didn’t understand the answer do you add the shrink to the 12 when 6 x 1/4= 1.5 ?
Overall length
Neat
Thanks ☺
3 point saddle please
th-cam.com/video/58GxBXNsEsc/w-d-xo.html already did that video check out that link
Is that skin tag near your eye still there?
Nope this video was done almost a year ago. Here is the video where I finally got rid of it. th-cam.com/video/E7Mx21EoYYI/w-d-xo.html
it's easier to pull through than an LB lol
Definitely agree