How To Use The Star On A EMT Bender Back To Back Bends
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- ln this video i will show you how to make a 90 degree bend using the star on your ideal bender. you can use it to make back to back 90 degree bends and pull up the short end of a pipe. this is a super easy bend which takes all of the math out of the equation. I will include amazon links to the items i have used in the video it will not cost you a dime more to use them and will help out my channel.
My amazon store where you can choose alot more items www.amazon.com...
Amazon links as follows:
ideal bender
amzn.to/2R1KYv1
stanley 16 foot tape measure
amzn.to/2xzIcpX
klein level
amzn.to/2UAkuTI
sharpie
amzn.to/3bEPGXu
Cameras And Gear That I Am Using
Canon m50 amzn.to/3h1EA1H
Sigma 16mm f/1.4 amzn.to/344dzXL
Go Pro Hero 7 Black amzn.to/343QWTq
Rode Video Micro Pro amzn.to/3ay2K1E
Comica XD Boom Wireless Microphone amzn.to/3gWHbtT
Movo Wireless Micorphone amzn.to/2PTgeeO
DISCOUNT CODES FOR ITEMS IN ALL OR PREVIOUS VIDEOS:
Tryavax wallets
www.trayvax.com use code Bold10 for 10% off all orders
Industructible shoes for everyone
www.indestructibleshoes.com use code MIKEG58 for 20% off
Surviveware shower wipes
www.surviveware.com use code MNTNRO10 for 10% off
Ideal 1/2 EMT Bender amzn.to/35sUaR0
Klein Dual Strippers amzn.to/3irPZIS
Klein 1/2 EMT Bender amzn.to/2RgixcB
Klein Linesmans pliers amzn.to/3latR7K
Klein 11-1 Screwdriver amzn.to/3glMRfV
Klein Stripper Pliers amzn.to/31mViU6
Santronics Voltage Tester amzn.to/3giLoa5
Scotch 33 Electrical Tape amzn.to/32i8WHi
Milwaukee hook blade knife amzn.to/2DVxkWV
Milwaukee 11-1 Screwdriver amzn.to/2RiiBIG
Klein Mc BX cutter pliers red handle amzn.to/3irg62D
Greenlee MC splitters amzn.to/2Roe1J3
Mailing address
P.O. Box 149
Covington Va 24426
Please Feel Free To Join Me On Patreon And Joining In On The Journey My Link Is As Follows. / mountaineeroutdoors1
PayPal: paypal.me/mountaineeroutdoors
Simple explanation. Thank you so much!
My pleasure thanks for watching and commenting ☺
Dude - I’ve learned a lot from some of these other channels like Sparky channel, Electrician U, etc. but your video was THEE ONKY one that was the best explanation on the star and how to bend it correctly. You took the time to explain it the best and it made sense for a total beginner like myself. Just wanted to thank you for helping me have a successful night in the shop and I really appreciate how well you explained it. Keep on keeping on 🤘🏼👍🏼💪🏻🤙🏻👊🏻
I appreciate this comment alot. And glad to hear that this helped you. Thank you for your comment and watching ☺
I've used the star a lot when I have an offset with a 90 in the same run or back to back 90's.
Always great info from you. Giving away free tips too. Thanks for sharing.
Thanks for watching. Yeah trying to make it easier on people so they don't have to struggle like I did
I don't mind using a Sharpie, the conduit usually gets painted anyways or hidden by sheetrock.
I agree... There are times though when it won't. Thanks for the comment and watching ☺
Thanks for the tips
Always my pleasure
I'm going to start making my 90 bends with the star.. it looks alot easier and less thinking to do it this way.. make your measurement and turn the bender backwards and place the conduit mark on the star and bend your 90.. simple..
True
If you want to put a short 90° on a long stick of pipe (90% of your 90°s) it's less ideal to use the star because you have to bend the full 10ft up into the air. The back of the bend method is ideal for making the last 90° on a stick of pipe with multiple bends.
that 16th could just be from being on the wrong edge of the sharpie line right?
True could have.
Thank you for the tips
Definitely my pleasure thanks for watching and commenting ☺
Forget learning the Star. I need to learn the sound you made at 03:59!
😂 😂 😂 😂
If I'm gonna make a 45° bend on 1/2" EMT and my sharpie mark is lined up with the⭐. The bender hast a 45° line on the head and I'm pulling the pipe down. What part of the piece of EMT do you stop at? The top of the pipe, bottom or center for the correct angle? 🔌
Bottom
Where you short because you didn’t add shrinkage? Or is that nor required when you use the star?
No when you use the star it's supposed to be spot on. Probably did have it exactly on the right spot
Wunderbar!!!
How do you do a “ Kick”?
th-cam.com/video/6J8niHARXAg/w-d-xo.html
3:59 me while watching this video
I assume you are talking about the face I made?? 😂 😂
and now I can't unsee it...
😂 😂 😂
Lol
Every time I bend a 90 with the star it comes out a bit short. And I have no idea what I'm doing wrong.
Pls..Some one help me!
How much are you off?? It should definitely be right on the money
Shrinkage
Can I bend a 45 this way?
Yep it will work but you may need a protractor or just know the take up on everything trial and error.
Thank you. Not all JW’s explain things the best, shocking i know haha.
😂 😂 I know I have been there for sure. I appreciate you watching and commenting ☺
My trick
3:57 😂😂😂😂😂😂😂😂 beaver? 🦫
😂 😂 😂
23 years of running conduit in the IBEW, never mark the pipe with markers!
Nice that's awesome. Thanks for watching and commenting ☺
Thanks for sharing. No one else outside of the IBEW knows that…cats out out of the bag now.
Now would that be a #2 pencil or a lumber pencil??? Mechanical pencil or perhaps the dreaded colored pencil….. smh now I’m all cornfused I might have to go to my local n swear in just to get this top notch knowledge
@@anthonytorres9469 Here’s the IBEW holy grail. I’ll prob have to change my name and go into hiding after this but, marker with disappearing ink. You’re welcome.
You could use the same sharpie to erase the marks another trick
I’m well on my way to being a master electrician
That's right
Congrats bud. Good trade to be in. People aren't ever gonna quit needing sparkies. Been doing it for 7 years gonna test out pretty soon. Total scab here no shame in it either union ain't for me. Seen my boss make damn near a million dollars off of 4 guys working year round. I'd take a quarter mil scratching my nutts lmao.
😂 😂 That's hilarious I appreciate you watching and commenting. You're right no machine will ever take over our trade.
for the guys that criticize being off by 1/16" YOUR NOT BUILDING PIANO AND IT'S NOT GOING TO BE REV-ING AT 10,000 RPM's WHILE DOING 200 MPH DOWN THE 1/4 MILE STRIP!!! IT'S CALLED JUSTIFIED PRECISION... LEARN IT, KNOW IT, LIVE IT!!!
😂 😂 😂 Truth
Great stuff, man. I always look forward to your videos and appreciate the time you spend doing them. I'm new to electrical work and am trying to learn all I can.
Well I appreciate you watching and commenting. It's definitely a great trade for sure we should always have a job for sure.
Pretty cool! All the years of experience...you make it look so easy.
It has taken me a long time to get it right.
😆@ 3:58
40 years of commercial / industrial and i have found the star to be inaccurate and rarely use it
Wow I think that is a great thing. I usually don't get off by far at all. If I do it's definitely because I didn't line it up correctly. I appreciate you watching and commenting ☺
Well, mine turned out 2 3/4" too long. I guess it's better than too short
That's right you can always take it off, but you cannot put it back on once it's gone (well with a coupling I guess you can) I appreciate you watching and commenting ☺
Mr. Mountaineer, Thank you so much. The star technique is exactly what I needed to create a rectangular "hoop"for a construction. With your guidance, I nailed it!! On the money! I think the star technique is something that is relevant to a lot of DIY people and might be a good subject to concentrate on for another video instead of mentioning it at the end. I mean, what's a "back bender" to a novice?? Thanks again.
I agree but using a star is not always a good idea. It does have its place but not everytime
A 90 using the arrow is super easy on offsets the STAR is used for me 40 years in the business hello...
Exactly
Older wooden in house
Hey im a journeymen ressi just got a new job in commercial never bent much pipe before how do you do back to back box offsets without getting t them back wards any trick to go from one box offset to the next box
I have a video coming out soon on this. Stay tuned.
Use couplings
🤢
Why do people use the other technique with math if you don’t necessarily need to?
Sometimes you have to... But I do agree
You should know both methods. Depending on the bends you might be stuck having the shoe forced to face the other direction.
Is anyone having problems with the kleine bender? I made three star bends today that was off dramatically.
Not me
Back in the olden days, I almost bought an exhaust tube bender. It came with a set of cards that would give you diameter, length of pipe and degrees of each bend. You'd take a straight piece, cut it to length and then make markings where each bend would go. You'd clamp a protractor on the end closest to you and start feeding the pipe in to the first mark and make your bend the required degrees. Then, you'd unclamp the pipe, feed it in to the next mark and then rotate it the degrees as given on the card. Then, unclamp and feed in to the 3rd mark, rotating again the degrees indicated on the card and bend it the required degrees. What would come out the end is a zig-zag that "usually" fit perfectly. Adding y's were a bit tougher as two pieces, separately bent had to be welded PROPERLY and at the right angle.
That's cool my buddy installs exhaust and he's good at it too. Thanks for watching and commenting ☺
my goodness you just show me a tip that will save me time I've always done it by doing the math doing take up thanks
My pleasure glad this helped you.
I do the same tip mark ! But I put a X .. thanks brother
Nice. Thanks for the comment and watching ☺
This video was the most helpful video I’ve seen on this topic. Thank you.
Always my pleasure thanks for watching and commenting ☺
I really appreciate your content 👍🙏😎
Definitely my pleasure
Excellent. Thanks
My pleasure thanks for watching and commenting ☺
Thank you, I was a little confused about this haha, it really help
ZGod bless you too
Thank you ☺
What happens if you use the star the other way?
It would come up short.
@@MountaineerOutdoorshappened to me today on a back to back 90 😹
thank you
My pleasure ☺
Thanks buddy
My pleasure thanks for watching and commenting
How about the deduct on the bender? Do you take that in to account when using the star?
No the star takes all the math out of it.
Dude, you talk too much. Get to the point.
I believe I did. 😉