Only thing I would have added is a quick mention of making sure the floor below can handle the added stress on those two points. That's more up to the engineer really to make sure that is proper. Has to be planned out differently if this is a wooden base - floor joists below - as opposed to concrete base
I am glad to see that you are working with your son. Years ago my oldest son work with me in our small Remodeling company. Some of the most rewarding years of my life.
As a contractor I have to mention some things about pricing. Ina addition to the work you are paying for the contractor assuming all risk. How do you quantify that? You are also paying for the movement of the project. Notice how this contractor mentions that he spent some time thinking about how he was going to transfer the load. I have a similar project in the works and I am visiting the site again before I proceed to finalize my approach. I will sit in the attic and take a couple more pictures and ruminate about how I will proceed too. That all adds up to a smooth project that flows. It's not all wood and screws. Kudos to the contractor.
You factor that in, as you're doing the bid. You spend 4 hours contemplating, and probably another 4+ doing your bid work, plus time there. That's all an additional day or more on the final proposal.
@@LightGesture In nearly every field we think about work when we're "off the clock". As an engineer I'm often thinking about the best design approach for an ongoing project while I'm at home (showering, eating, relaxing, etc). If i started billing my projects based on my "thinking" time I'd probably be brought into a meeting very quickly.
Very cool! I like how you used the framing square to guide your skill saw. Also liked how your son stepped back to allow you out first! Very respectful! Great job I’m always intimidated on load bearing walls but this helps with my confidence so ty! 💪🏻
It's awesome that you are working with your son on this and that he shows great enthusiasm- definitely a great bond between you two!! You both are a great team!!! Loved the video and I did learn a few things for sure!!!
Great to see a father and son working together ... That does not happen that much now a days. You both are lucky and more importantly you both have worked to make your relationship so great. Wish all young men had great fathers like you sir and you son is great also probably due to having a great father and mother. Best wishs to you all. Regards.. enjoy your videos.
Guys! STUD PACK! I grew up working with my dad in the construction industry. (Flooring) I was raised on job sites. Your videos bring me joy and nostalgia, they warm my heart and they have taught me so much. Thank you for this channel and all of the work you have put in to making these videos. I truly hope this message reaches you.
that was very informative. i want to do this to my house, although it will be awhile before i can. showed me all the things that i probably wouldnt have thought of. well done!
man i am getting ready to have to do this exact same thing to my grandmothers home that i acquired! it was built in 1953, with a hip roof and a load bearing wall between the kitchen and living room and watching this helped tremendously!
I really appreciate videos like this. I’ve added beams in new construction but I’ve always been curious how beams can be added while still supporting the weight of the roof
Absolutely fascinating 👏 Wish you guys were in eastern Tennessee so I could have you build my medium size tiny home! Thank you for sharing all your knowledge!
Great job from a long time Pro!!! Refreshing to see you and your son working together so well. Too many young men are NOT wanting to learn the trades bc they don’t see it as glamorous. The sad part is they opt for many other careers that won’t pay nearly as well as a very good professional contractor making money running his own business!! Great job
Just decided to go back to watch some old StudPack for fun. I feel like this is the first video your Dad wasn’t completed annoyed with the TH-cam thing and his personality started to shine through. That pipe video was rough. iPhone, shaking, your dad not wanting anything to do with it 😂😂😂. Now his presentation skills in front of the camera are incredible and rivals any TV host. Paul is the next generation’s Tom Silva or Bob Villa, and is 100% authentic. So awesome to see.
The most satisfying part is when you remove your temporary wall and you get that first feel of how open you just made the room! Great job fellas I’ve always used screws in any temporary wall just cause it’s easier to take apart and no nail pulling and NO WASTE!
Great video, Thanks! My son is very interested in building and specifically interested in beams. So we wanted to show him what it takes to install a support beam. Your video had good details and explanations of why. I loved how you answered the viewers questions without having to be asked. You're a natural teacher and what a cool project for you and your son. The only thing I would do differently is to slow down the camera a little so we can take it all in. Looking forward to more videos. :) Take Care
Thanks Tyson, we appreciate that very much! We apologize for the camera work. This was only our 4th video and we've recently upgraded to a GoPro as well.
I have seen a palm-nailer before, many times, but I have never seen how one was used, or the purpose of it.....and I gotta tell you, it looks absolutely invaluable. THANK YOU!
Thanks for the instructions I'm a contractor small contractor and want to remove a parcel load bearing wall to extend a kitchen at my daughter's home this will definitely help me build my confidence .
After this being the third video I have seen, I subscribed. Seems like very knowledgeable people that actually care about the customer and the quality work performed.
I was looking for a long time for a video that really explained a difficult job and the professional installation. Thank you for sharing your experience You are a master in construction 💪🏽
Things done well. Starting with an engineering approved plan and following the plan. Working with son to teach valuable skills. Explaining the purpose of each existing support. Showing how to build a temp support that will remove the load from the existing structure that is to be removed. Showing how each support to be remove no longer has a load on it, thus safe to remove. Professional teaching tutorial, covers all important tasks well, video organized and even shows importance of keeping area cleaned up. Son also shares his experiences on skills. Apparent that son/father have great respect for each other. Great life lessons. Things not done well...You didn't make the video all about you (; ......Thank goodness.
I wanted to write a comment like this one but it’s already done :) You guys are a GREAT team and I thoroughly enjoyed watching you two and I learned a lot!!
Really appreciate how you well you work together and that you take time to keep the job site clean! I do the same and my friends and family appreciate it too!
@@StudPack I have a problem underneath in my basement the flowing I guess is 10 so its deteriorating okay deterioration is that a foundation problem or do I just need to have the floor listed in the in the pool that deterioration it out because it's starting to leak water it comes up on my front steps partially help if you can
The Bowzer didn’t mean any disrespect you did a fantastic job,I watched the whole thing,im 67 myself,electrician I’ve heard them referring to me on the job so you fit the bill,but I can outwork some of the younger guys,use the brain like you did to make it easier,nice job .
@@jackoshea687 not ah problem. I was going up a long flight of stairs when this guy in maybe in his 40's went running up the stairs and said "behind you pop's"! I laughed like hell. Cracked me up!
You the man brother like the way you explain everything and made sense of everything! I have a home similar wall and had a fake contractor suppose to put a beam to open up the area between living room, kitchen and dining room, contractor took wall down and I never seen him again, now it’s sagging. From your experience what would be the cost of a job like this if you don’t mind me asking I have to find someone ASAP and don’t want to get gotten. Thanks, nice job and wish you was in my area I would of definitely hire you.
This was fun to watch. I just did something similar in my house to span a room that also opened to a cathedral ceiling (two story house).. had to stack together 4 LVLs, each 18" wide and 20' long!
Basically did the same application but with 3 LVL's. When I install these, 2 or more, I laminate them together by applying PL premium, (liquid nails) onto the surfaces to be joined before screwing them together. I install one, apply PL to one surface, then install the second one and temporarily fasten them with screws until all 3 are installed. Then to permanently fasten them together, I use 1/2" threaded rod with lock nuts and washers in a "W" pattern. I buy long lengths of threaded rod and cut to the length required. I then mark out 16 inch centres on the beam before drilling, so the threaded rod won't interfere with the ceiling joist hanger placement. Depending on the thickness of the existing cement floor, in my case, I had to cut out the cement in 2 ft. squares where the support posts would sit. The existing cement floor pad was removed and I then dug out a 2 ft. deep footing, filled them with cement to create a much stronger pad for the support posts to sit on. In some applications I install steel jack posts instead of using wooden supports.
Thanks Norm, that's a very strong installation. I've done footings before also when I lived in southern California. Had to epoxy rebar into existing slab with a $150/hour third party inspector looking over my shoulder to be sure the holes were proper diameter/depth, clean holes with brush/compressed air, proper epoxy, etc. etc. Same size as yours too. 2 x 2 x 2 then go get a yard of cement in a pull behind trailer. Can't remember the name of that place but you could buy cement by the yard - kinda nice sometimes.
I’ve heard that adhesive between beams is actually weaker than just putting them together as they act more like a single beam without the layer between them.
The adhesive when applied is very thin. Like when installing engineered floor joists, it's a building code requirement to not only screw but glue the floor sheathing to the joist creating one solid structure. Screws applied alone have a tendency to loosen over time when the floor flexes from weight traveling over them. The glue prevents this from happening. The same holds true with the LVL application. If you don't screw then bolt the beam together before the glue cures your theory may hold true. Then there would be gaps between the boards being affixed together. No screw could draw them together properly. This is why it is a must that they be screwed together before the glue has time to cure. If you want to stiffen up floor joists that meet the bare minimum code for their application, I glue and screw 2x4's or 2x6's to either side of them and it works perfectly. Even affixing them to one side makes a substantial difference. I've also screwed and glued 3/4" plywood to the sides of the joists, which works wonders, especially if you have limited working space. Just try taking two boards apart after gluing them together. Don't even screw them. Ain't going to happen. They come apart in sharp chunks. To make a room, like a home theatre more sound proof, I've glue drywall over drywall. No screws to apply. Saves a substantial amount of time and labor. Works like a charm. That's why they call it liquid nails. Have a good one. I may not be handsome, but I'm handy. Right honey? I bought my spouse a 12" miter saw for her birthday, so I could borrow it. :-) Honey, mind if I use your saw?
greetings hard workers; yall never cease to amaze me. thank yall for the tasks yall perform and the explanation along the way. may God bless all your endeavors..................g
Very good informative video, great attention to detail and good workmanship. I've done many load bearing wall removal to open up kitchen area. Lots of planning and labor involved for sure. Enjoy all the videos.
![เจอประจำ ตอน เปิดเทอมวันแรก [EP.29]](http://i.ytimg.com/vi/eFK-B836i60/mqdefault.jpg)
I like the teamwork between the two. Your son is building memories he will have forever. These are the times you cannot get back.
I watch a lot of construction videos, and this ranks at the top of the list for quality of information, process steps, and clarity. Thank you!
Great stuff men, to see a father and son team working together is a beautiful thing..👍💪
It sure is
You have no idea how satisfying it is to see that great bond even in the new generation.
One of the most thorough videos on removing a load bearing wall I've seen. Very well done.
Wow, thanks!
and no bulshit fillers that waste time. great job guys
Only thing I would have added is a quick mention of making sure the floor below can handle the added stress on those two points. That's more up to the engineer really to make sure that is proper. Has to be planned out differently if this is a wooden base - floor joists below - as opposed to concrete base
I am glad to see that you are working with your son. Years ago my oldest son work with me in our small Remodeling company. Some of the most rewarding years of my life.
Nothing better than father and son working together as a team .
As a contractor I have to mention some things about pricing. Ina addition to the work you are paying for the contractor assuming all risk. How do you quantify that? You are also paying for the movement of the project. Notice how this contractor mentions that he spent some time thinking about how he was going to transfer the load. I have a similar project in the works and I am visiting the site again before I proceed to finalize my approach. I will sit in the attic and take a couple more pictures and ruminate about how I will proceed too. That all adds up to a smooth project that flows. It's not all wood and screws. Kudos to the contractor.
You factor that in, as you're doing the bid.
You spend 4 hours contemplating, and probably another 4+ doing your bid work, plus time there. That's all an additional day or more on the final proposal.
Thank you for that comment. I'm learning.
@@zefrum3 Im in Canada, no seismic stuff, and we had to jack hammer up the pad and pour a big footing under each post.
From what I gather, the guys in the video are the homeowners.
@@LightGesture In nearly every field we think about work when we're "off the clock". As an engineer I'm often thinking about the best design approach for an ongoing project while I'm at home (showering, eating, relaxing, etc). If i started billing my projects based on my "thinking" time I'd probably be brought into a meeting very quickly.
Very cool! I like how you used the framing square to guide your skill saw. Also liked how your son stepped back to allow you out first! Very respectful! Great job I’m always intimidated on load bearing walls but this helps with my confidence so ty! 💪🏻
I caught that too!
Great job on taking the load wall down. Explanations on the process were very informative, thanks. Knowledge mitigates alot of remodeling fears.
Loved it!!! And love you make it look so simple when it’s really a complex task. The bond between you two it’s heart melting 😍
Thank you for the kind words Lina!
Thank you so much for sharing, as a female designer I thoroughly enjoyed it and learned a lot, Top Men, father and Son duo!🧡
It's awesome that you are working with your son on this and that he shows great enthusiasm- definitely a great bond between you two!! You both are a great team!!! Loved the video and I did learn a few things for sure!!!
Thx Wayne 💪👊
Great to see a father and son working together ... That does not happen that much now a days. You both are lucky and more importantly you both have worked to make your relationship so great. Wish all young men had great fathers like you sir and you son is great also probably due to having a great father and mother. Best wishs to you all. Regards.. enjoy your videos.
Clean up the mess? You must be far above an average carpenter. Great video.
You always have to clean up your mess.
Most hacks just trample it through the entire house! Always stop and clean up after a step that makes a big mess. It's worth it in the end.
Work like a pro...clean as you go.
Best LVL demonstration I have seen! I keep my job site clean as well. I noticed y’all did that throughout the day!
he never showed how they lifted it into place. that was the difficult step.
@@carlmax46 we latinos lift it up..lol.
Guys! STUD PACK! I grew up working with my dad in the construction industry. (Flooring) I was raised on job sites. Your videos bring me joy and nostalgia, they warm my heart and they have taught me so much. Thank you for this channel and all of the work you have put in to making these videos. I truly hope this message reaches you.
Very helpful video. I am putting a 14' beam in my load bearing wall to open it up. This gave me all the info I needed and the project was a success!
that was very informative. i want to do this to my house, although it will be awhile before i can. showed me all the things that i probably wouldnt have thought of. well done!
man i am getting ready to have to do this exact same thing to my grandmothers home that i acquired! it was built in 1953, with a hip roof and a load bearing wall between the kitchen and living room and watching this helped tremendously!
Great detail on the process, nice job and I'm buying a palm nailer.
This was just amazing, thorough and you worked well. I want to put an addition in my house and this was what I needed. thanks
Nice. Like how you are so simply serious about the critical aspects at the end.
done a couple before during renovations, you make it look so easy and simple.
Great instructional video! Proud that you involved your son. Excellent work on the beam AND the video.
Glad you enjoyed it!
I really appreciate videos like this. I’ve added beams in new construction but I’ve always been curious how beams can be added while still supporting the weight of the roof
Absolutely fascinating 👏 Wish you guys were in eastern Tennessee so I could have you build my medium size tiny home! Thank you for sharing all your knowledge!
Fantastic job. And just as great is the father/son working together. I worked with my son for many years in our own company. 👍🏻👍🏻👍🏻
Excellent work. Your helper is very good, helpful, obidient and resoursable with the tech video stuff. Great work, very clear and transparent.
Great job from a long time Pro!!! Refreshing to see you and your son working together so well. Too many young men are NOT wanting to learn the trades bc they don’t see it as glamorous. The sad part is they opt for many other careers that won’t pay nearly as well as a very good professional contractor making money running his own business!! Great job
Thx Carlos, much appreciated sir!!
Great job! very detail oriented workers thank you very much for sharing God bless you guys
Wow! What a difference! It makes it stunning. Great job 👏 👏👏👏
This guy reminds me of the guy's that taught me everything I know about building houses. Very good at his job.
Just decided to go back to watch some old StudPack for fun. I feel like this is the first video your Dad wasn’t completed annoyed with the TH-cam thing and his personality started to shine through. That pipe video was rough. iPhone, shaking, your dad not wanting anything to do with it 😂😂😂.
Now his presentation skills in front of the camera are incredible and rivals any TV host. Paul is the next generation’s Tom Silva or Bob Villa, and is 100% authentic. So awesome to see.
The most satisfying part is when you remove your temporary wall and you get that first feel of how open you just made the room! Great job fellas I’ve always used screws in any temporary wall just cause it’s easier to take apart and no nail pulling and NO WASTE!
You're right Vic! My wife loves that part too - when we finally take down the temporary wall.
Thanks! I've done construction, but each job has its own tricky characteristics. Besides, it's been years! Your video helped.
Great video, Thanks! My son is very interested in building and specifically interested in beams. So we wanted to show him what it takes to install a support beam. Your video had good details and explanations of why. I loved how you answered the viewers questions without having to be asked. You're a natural teacher and what a cool project for you and your son.
The only thing I would do differently is to slow down the camera a little so we can take it all in. Looking forward to more videos. :) Take Care
Thanks Tyson, we appreciate that very much! We apologize for the camera work. This was only our 4th video and we've recently upgraded to a GoPro as well.
@@StudPack Wow! That is really impressive for a 4th video! Again, looking forward to seeing more.
Is great having people like you training the new generations. CLEAN UP YOUR MESS!!👍🏾
Great video.. so informative and simple.. great to see you passing the knowledge to your son.. awesome
Love the video.. I like the using of the speed square to cut the rafters 👌🏽
I have seen a palm-nailer before, many times, but I have never seen how one was used, or the purpose of it.....and I gotta tell you, it looks absolutely invaluable. THANK YOU!
You got it 👍
Excellent video. I'm looking at doing this exact thing on my next project. Appreciate you all sharing this, nice to see it executed well.
Glad it was helpful!
Thanks for the instructions I'm a contractor small contractor and want to remove a parcel load bearing wall to extend a kitchen at my daughter's home this will definitely help me build my confidence .
Thanks John, good luck on your project👍
After this being the third video I have seen, I subscribed. Seems like very knowledgeable people that actually care about the customer and the quality work performed.
Love everything about your channel!! Keep up the good work!
I was looking for a long time for a video that really explained a difficult job and the professional installation.
Thank you for sharing your experience
You are a master in construction 💪🏽
Great video gents, super informative, clear and concise instruction and descriptions, a great father son combo!
Your work and safety ethic really shows, both in your effort and that of your sons. Great job.
Thank you very much!
Great I like remodeling. Customers always asking to do things like this project very good video thanks real and well done
Reminds me of me and my dad. Me in a cutoff and shorts and my dad all geared up and telling me repeatedly I should be too hahahha
The saw trick is useful. Thanks for sharing that too
Great to see a father and son working together to build something. Subscribed. :)
Thanks for the sub!
Great video on detailing how to open up a load bearing wall. Wish I saw this video when I did my wall.
Thx lugnuts!!
Things done well. Starting with an engineering approved plan and following the plan. Working with son to teach valuable skills. Explaining the purpose of each existing support. Showing how to build a temp support that will remove the load from the existing structure that is to be removed. Showing how each support to be remove no longer has a load on it, thus safe to remove. Professional teaching tutorial, covers all important tasks well, video organized and even shows importance of keeping area cleaned up. Son also shares his experiences on skills. Apparent that son/father have great respect for each other. Great life lessons.
Things not done well...You didn't make the video all about you (; ......Thank goodness.
Thanks Charles!
I wanted to write a comment like this one but it’s already done :) You guys are a GREAT team and I thoroughly enjoyed watching you two and I learned a lot!!
I feel like a daughter learning too. Thank you
Great job you explain everything very well.
Really appreciate how you well you work together and that you take time to keep the job site clean! I do the same and my friends and family appreciate it too!
solid explanation, easy to understand. Thank you.
Nice work! Thanks for taking the time to video your project to help others. All the best. Safety first!
Thanks, you too!
Loved the fire after effect when Paul went up into attic. Hilarious touch 😂
I really appreciate the tip about watching the blade as you cut the supporting studs.
Thank you both, for taking the time to produce the video. I am also observing your commitment to quality.
Thanks Sheldon!! Much appreciated
@@StudPack I have a problem underneath in my basement the flowing I guess is 10 so its deteriorating okay deterioration is that a foundation problem or do I just need to have the floor listed in the in the pool that deterioration it out because it's starting to leak water it comes up on my front steps partially help if you can
Awesome video. What a great father you have. Cherish that man
RCH Handyman here... once again , i applaud the detailed descriptions .
Thanks for sharing! I found this very useful 👍🏻
Your dad is awesome dude!!! Seriously bad ass work. When that old wall came down in one piece like that 🍒 very cool.
Good video job well done,the old guy is a classic and knows what he’s doing.
What old guy??:)
Old guy! Where? That comment must of came from a young whipper snapper!
I'm 70!
The Bowzer didn’t mean any disrespect you did a fantastic job,I watched the whole thing,im 67 myself,electrician I’ve heard them referring to me on the job so you fit the bill,but I can outwork some of the younger guys,use the brain like you did to make it easier,nice job .
@@jackoshea687 not ah problem. I was going up a long flight of stairs when this guy in maybe in his 40's went running up the stairs and said "behind you pop's"!
I laughed like hell. Cracked me up!
Now that Im older, I really enjoy working with my dad and having that feeling of getting things done right as a team
Great Video! I have been trying to find something as detailed as this for a while. Thank you.
Glad you enjoyed it!
You the man brother like the way you explain everything and made sense of everything!
I have a home similar wall and had a fake contractor suppose to put a beam to open up the area between living room, kitchen and dining room, contractor took wall down and I never seen him again, now it’s sagging. From your experience what would be the cost of a job like this if you don’t mind me asking I have to find someone ASAP and don’t want to get gotten. Thanks, nice job and wish you was in my area I would of definitely hire you.
This was fun to watch. I just did something similar in my house to span a room that also opened to a cathedral ceiling (two story house).. had to stack together 4 LVLs, each 18" wide and 20' long!
Love the father/son teamwork. Hope I can do the same with my son.
Great job, very enjoyable to watch. Like your teaching method. Thank you.
You are very welcome
I am a contractor in Maryland and I like what I saw. Finally a true pro doing exactly what I do to earn an honest dollar.
You guys rock!! Excellent work. I very much enjoy your vids.
This was a good video. Moved along at a nice clip but it showed the pertinent details. Thanks.
Great video! Thanks for recording the whole process!
You bet!
Absolutely. Great info, thank you a million!!
You make it look so easy. Excellent.
Basically did the same application but with 3 LVL's. When I install these, 2 or more, I laminate them together by applying PL premium, (liquid nails) onto the surfaces to be joined before screwing them together. I install one, apply PL to one surface, then install the second one and temporarily fasten them with screws until all 3 are installed. Then to permanently fasten them together, I use 1/2" threaded rod with lock nuts and washers in a "W" pattern. I buy long lengths of threaded rod and cut to the length required. I then mark out 16 inch centres on the beam before drilling, so the threaded rod won't interfere with the ceiling joist hanger placement. Depending on the thickness of the existing cement floor, in my case, I had to cut out the cement in 2 ft. squares where the support posts would sit. The existing cement floor pad was removed and I then dug out a 2 ft. deep footing, filled them with cement to create a much stronger pad for the support posts to sit on. In some applications I install steel jack posts instead of using wooden supports.
Thanks Norm, that's a very strong installation. I've done footings before also when I lived in southern California. Had to epoxy rebar into existing slab with a $150/hour third party inspector looking over my shoulder to be sure the holes were proper diameter/depth, clean holes with brush/compressed air, proper epoxy, etc. etc. Same size as yours too. 2 x 2 x 2 then go get a yard of cement in a pull behind trailer. Can't remember the name of that place but you could buy cement by the yard - kinda nice sometimes.
I’ve heard that adhesive between beams is actually weaker than just putting them together as they act more like a single beam without the layer between them.
The adhesive when applied is very thin. Like when installing engineered floor joists, it's a building code requirement to not only screw but glue the floor sheathing to the joist creating one solid structure. Screws applied alone have a tendency to loosen over time when the floor flexes from weight traveling over them. The glue prevents this from happening. The same holds true with the LVL application. If you don't screw then bolt the beam together before the glue cures your theory may hold true. Then there would be gaps between the boards being affixed together. No screw could draw them together properly. This is why it is a must that they be screwed together before the glue has time to cure. If you want to stiffen up floor joists that meet the bare minimum code for their application, I glue and screw 2x4's or 2x6's to either side of them and it works perfectly. Even affixing them to one side makes a substantial difference. I've also screwed and glued 3/4" plywood to the sides of the joists, which works wonders, especially if you have limited working space. Just try taking two boards apart after gluing them together. Don't even screw them. Ain't going to happen. They come apart in sharp chunks. To make a room, like a home theatre more sound proof, I've glue drywall over drywall. No screws to apply. Saves a substantial amount of time and labor. Works like a charm. That's why they call it liquid nails. Have a good one. I may not be handsome, but I'm handy. Right honey? I bought my spouse a 12" miter saw for her birthday, so I could borrow it. :-) Honey, mind if I use your saw?
Right on time Im ready for temporary walls next week mine is real similar
almost same size Thanks and thanks again
great job and good eye for the details!!!
I've learned a lot from you. Best on TH-cam man thank you from Scotland
Great info! Great video! Thanks I appreciate it.
nicely done! excellent video. thanks.
Thank you 🙏 so much for sharing your knowledge in detail
I’m doing the same in my home
Nice SCAG mower in the beginning! New sub to your channel! 💯
greetings hard workers; yall never cease to amaze me. thank yall for the tasks yall perform and the explanation along the way. may God bless all your endeavors..................g
Gracias. Appreciate your wisdom and help
Awesome video boys. Thank you
Very well explained, and it looks great !!!
Glad you liked it!
Note to self... buy a palm nailer!
Thanks for showing this.
I had no idea this tool existed.
It's a life saver👍 thanks Derek!!
Great teaching video! Thanks
Very good informative video, great attention to detail and good workmanship. I've done many load bearing wall removal to open up kitchen area.
Lots of planning and labor involved for sure.
Enjoy all the videos.
Helpful and entertaining! Thanks for sharing!
Great work! Awesome dudes!
Great job , looks good opened up
Exactly what I was looking for. Thanks my man.
You're welcome Jose, appreciate the comment!!!
excellent video. very informative with good details that people may not have considered.
Man that speed square trick blew my mind! So simple I should have thought if it
Extremely helpful video, thank you guys!
Glad it was helpful!
Glad I found your channel! I'm from Toledo Bend lake area in Louisiana nice to found info for our area
Thanks Scott!! Love it over there in TB 👍