Super great video! Stayed till 4am waiting for the video just to see how you programmed the BCM. For the configuration error you can also do a Proxy Align or a reset configuration, but you have to use J2534 box and pay for Tech Authority and Witech, about 90 bucks. I hope this CDA software does something similar without paying the dealer each time. I'll buy one from you soon. For this generation of truck, the Fuse Box is no longer called a TIPM since it no longer has the BCM built in to the fuse box. Although you can still call it the TIPM for legacy reasons.
Please don't call the fuse block a TIPM, it makes people think it needs to be programmed when it's replaced. I've had to charge WAY too many people for drive outs for this mistake. You have a BCM or you have a TIPM, not both.
I have a flood vehicle ive replaced entire body harness bcm ecu rfh etc from more than one vehicle this program can clear each modules vin and i can use autel ms906 pro ? Im going too look into a launch tt pro as next purchase also can i use cardaq3 jbox instead of micro pod
Yes, the Autel MS906 Pro can be used to clear VINs from various modules in your flood vehicle, which is helpful when you’re working with components from different vehicles. It's a versatile tool that should assist you well in this process. Looking into the Launch TT Pro as your next purchase is a good idea-it's a solid option with a lot of capabilities. As for using the Cardaq3 Jbox instead of the MicroPod, the Cardaq3 is a great tool and should work for many applications, but make sure to confirm that it’s compatible with the specific systems you’re working on. The MicroPod is often recommended for certain Chrysler vehicles, so check if the Cardaq3 covers the requirements you need. If you need any more advice or have other questions, feel free to ask!
@@globalcommerce7654 From what I’ve seen the it does I was just making sure it’s compatible with your software before hand so I knew if I needed too purchase a micropod or not my next question is do I use cda too clear the vin on my modules and then the ms906 pro too write the proper vin too match all the components together or is the ms906 able too clear the old mixed vins and rewrite correct vin without a secondary program
Hi please check the supported vehicles list in the description on my website globalcommerceca.com/products/obdstar-dc706-ecu-tool-full-version-for-car-motorcycle-ecm-tcm-body-clone-by-obd-or-bench?_pos=2&_sid=15cda437f&_ss=r
Great job!!! Don’t stop fighting with large corporations.
Best Regards from Poland
apperciate it! like and subscribe!
I rarely comment, but thank you so much man. You saved my truck!
Glad to hear it
Where can I buy
Great video, I always watch til the end because I want to learn everything about the procedures you use. Thanks again
Wow that lady looks like my niece. Gorgeous. 😊
Super great video! Stayed till 4am waiting for the video just to see how you programmed the BCM.
For the configuration error you can also do a Proxy Align or a reset configuration, but you have to use J2534 box and pay for Tech Authority and Witech, about 90 bucks. I hope this CDA software does something similar without paying the dealer each time. I'll buy one from you soon.
For this generation of truck, the Fuse Box is no longer called a TIPM since it no longer has the BCM built in to the fuse box. Although you can still call it the TIPM for legacy reasons.
Please don't call the fuse block a TIPM, it makes people think it needs to be programmed when it's replaced. I've had to charge WAY too many people for drive outs for this mistake. You have a BCM or you have a TIPM, not both.
Also, your suggestion of PROXI Alignment would have written the VIN as well. Reset BCM, PROXI Aling and transfer key and that should be it.
Bought your tool, still waiting on you to set it up.... need 4 more if it works
Please contact globalcommerceca@gmail.com for direct response or our phone support line
👍🏾
Please drop a dodge ecm video
theres already some videos on my channel, please check them out
I have a flood vehicle ive replaced entire body harness bcm ecu rfh etc from more than one vehicle this program can clear each modules vin and i can use autel ms906 pro ? Im going too look into a launch tt pro as next purchase also can i use cardaq3 jbox instead of micro pod
Yes, the Autel MS906 Pro can be used to clear VINs from various modules in your flood vehicle, which is helpful when you’re working with components from different vehicles. It's a versatile tool that should assist you well in this process.
Looking into the Launch TT Pro as your next purchase is a good idea-it's a solid option with a lot of capabilities. As for using the Cardaq3 Jbox instead of the MicroPod, the Cardaq3 is a great tool and should work for many applications, but make sure to confirm that it’s compatible with the specific systems you’re working on. The MicroPod is often recommended for certain Chrysler vehicles, so check if the Cardaq3 covers the requirements you need.
If you need any more advice or have other questions, feel free to ask!
@@globalcommerce7654 From what I’ve seen the it does I was just making sure it’s compatible with your software before hand so I knew if I needed too purchase a micropod or not my next question is do I use cda too clear the vin on my modules and then the ms906 pro too write the proper vin too match all the components together or is the ms906 able too clear the old mixed vins and rewrite correct vin without a secondary program
Sir can you make video to show how unlock pcm of Jeep dodge and Chrysler by CDA
Unlock videos coming soon.. stay tuned..
Can a 2019 Dodge Ram BCM be clone by the OBDSTAR DC706 and if not what will
Hi please check the supported vehicles list in the description on my website
globalcommerceca.com/products/obdstar-dc706-ecu-tool-full-version-for-car-motorcycle-ecm-tcm-body-clone-by-obd-or-bench?_pos=2&_sid=15cda437f&_ss=r
What model LAUNCH did you use?
Thank you
@@Motion.christionPRO TT
@@globalcommerce7654can you send me the link please
@@globalcommerce7654
Need 2020 rf hub vin correction video 👀
stay tuned, its coming soon
Do you ship to india.
Yes
Can I use my cardaq 3 plus
Same question I have
No this only works with our version of CDA6
Micro pod only
Do you offer this service ?
yes but not at the moment. check back at a later date