BCM Programming with VCX Nano and SPS
ฝัง
- เผยแพร่เมื่อ 12 ต.ค. 2020
- In this episode, I go over how to replace and program the Body Control Module (BCM) on my 2007 GMC Sierra 1500 using the VCX Nano and the SPS service from the AC Delco TDS website.
Check out the Lowbuck LS website here: LowbuckLS.com
Follow us on Instagram here: / lowbuckls
Join the Lowbuck LS Facebook group here: / 649494135791408
Like the Lowbuck LS Facebook page here: / lowbuckls - ยานยนต์และพาหนะ
![[TH] VCT Pacific Stage 2 - Week 3 Day 3 // DFM vs PRX | DRX vs TLN](http://i.ytimg.com/vi/il3Twexat3A/mqdefault.jpg)
Excellent overview of the VCX and TDS website.. had no idea GM had all this infrastructure for vehicle configuration.
What window are you using sir
I followed this to the letter and it went fantastic. Nice work. Nothing against dealerships (ok well maybe lol) but they quoted just over $2000 to change out the BCM for a right signal light that would not work. Reading online I discovered it was a bad IC in the BCM and bought a used one for around $30. Got the VCX and followed the video and all is now well. Not to mention its a fairly decent diagnostic tool. I was able to do a Crankshaft Sensor reset and look at quite a few items under the hood. I did have some issues with the airbag but discovered another actual error with them and was able to locate the issue with the VCX. Thank you for putting this out there. Truly appreciated.
Great, glad it worked well for you!
Thanks a million for this video!
Great job.
Thank you for the video! Very informative.
Thanks low buck
Great video, these little devices will pay for themselves after 1 use.
Protip: Your CEL light is always on if the engine isn't running.
Did like and was already subscribed :)
Thanks bert
Excellent!
thank u a lot can u make more videos about tech2 your video helped me
You are awesome
Also, Thank you for the reply.
Thanks so much
10/10
Anytime u update a module always clear ur dtcs.. learned this when I worked at a chrysler dealership
Great video. My BCM has gone out. I have no highbeams or AC and my air bag light cam on all about the same time. I ordered the VCX nano and a new BCM and I purchased the ACDelco software. Hopefully this fixes my issues.
I have a 2006 SA Vue with a possible bad BCM. Did this process work out for you?
BCM Programming with VCX Nano and SPS
th-cam.com/video/Bt3DaUGS8-c/w-d-xo.html
$109 I got the VCX Nano from Amazon. It does not come with software that will cost you a extra $75 for GM from VCX. Too much for something to see IF ... It works. The FREE version of software does not work. I have screenshots step by step of error messages... IF you feel like you want to debate me on that - I followed your instructions perfectly. Checking the GM box gives you Toyota.
I received a call from Shanghai CHINA at one point.
$184 = IF it works... I can get the dealer to program my stuff for that much.
You made it seem like the VCX + AC Delco software and subscription WAS all that was needed. I now have a AC Delco subscription and VCX that does not work... And It took me ALL day on my day off to determine I needed additional software. The AC Delco software is PUNISHINGLY slow and I downloaded and installed TWICE because I could not get things to work. I followed your instructions perfectly. I'm tempted to get the GM Tech 2 with Candi Module connector... $400-$500 no Chinese taking over your computer.
BCM Programming with VCX Nano and SPS
th-cam.com/video/Bt3DaUGS8-c/w-d-xo.html
$109 I got the VCX Nano from Amazon. It does not come with software that will cost you a extra $75 for GM from VCX. Too much for something to see IF ... It works. The FREE version of software does not work. I have screenshots step by step of error messages... IF you feel like you want to debate me on that - I followed your instructions perfectly. Checking the GM box gives you Toyota.
I received a call from Shanghai CHINA at one point.
$184 = IF it works... I can get the dealer to program my stuff for that much.
You made it seem like the VCX + AC Delco software and subscription WAS all that was needed. I now have a AC Delco subscription and VCX that does not work... And It took me ALL day on my day off to determine I needed additional software. The AC Delco software is PUNISHINGLY slow and I downloaded and installed TWICE because I could not get things to work. I followed your instructions perfectly. I'm tempted to get the GM Tech 2 with Candi Module connector... $400-$500 no Chinese taking over your computer.
Any update on this? Did you manage to solve your problem?
Great overview.. just wondering if this will work on Holden (Australia) ?
Experience diagnosis. Tec. Nice video saludes noel matute
Is the vcx nano still the best budget programmer for this ? I have a 09 Tahoe and I need to change some settings as it was a police vehical I'm pretty sure they disabled the drl's and the auto turn on lights when it gets dark.
I have a 2015 gmc 2500, my truck was originally from Canada but I bought it in the US. I am not able to turn my headlights off when the truck is in drive and it is dark outside. I need this feature to go through security gates at my job as well as not blind people at the boat launch early mornings. Will this allow me to change the headlight setting in the BCM?
great!!!
I am new, brand new, no previous experience new to any kind d of programming/tuning. My 2001 5.3 keeps draining the battery and I exhausted all methods known to me to find the slow leak with no success. Mechanic inspected and suggested the BCM likely needed replaced. After watching your videos many times as well as some on Goat Rope Garage, my confidence was high. I had a degree of success but my truck won't start after the reprogram. Also noticed that there are not the many options shown in your video...4 modules and 5 under the BCM. Also having issues with Tech2win, says not licensed and I don't know if there's a special way to launch it or something else I'm missing. This is a lot to unpack..but any help is appreciated.
What were some of the systems you were having problems with, mine no spark or injector pulse so far was fuel pump no ground or signal from computer so no trouble codes either
DIC: Driver Information Center, it’s the message center in your Instrument Panel.
I need to reprogram airbags after a accident, and correct odometer, what parts of all the options do I need?
Please can you show how to change the brake fluid on the Electric car Renault Zoe Year model 2019. Which fault code reader works for this Electric car. It's a Renault, so I'm wondering if the Can clip won't work for this car? Thanks! From Tommy Bertilsson from Sweden
Do you think this would work for Global A vehicles? I've got a 2017 Chevy Sonic. I installed fog lights and the dealer won't program them talking about needing an Auth code.
Do you know if there is any way tune out Service Ride Control on a 2008 Escalade
I know this is an old video but can you also program modules? I have autolock on my truck I want to shut off and my research says it must be turned off with a tech 2 no other way.
Will this work still on SPS2? I was told it wont work if a vin was already programmed on it. I have an 02 sierra and Im planning to swap all modules and wiring to 03+
Hi what program,and what scanner to use for 2008 Chevy Silverado to program all the modules thanks
Aren't all the dash lights supposed to illuminate with key on engine off?
Can you redo this video with the new sps software, i just did a colorado bcm replacement and the gauges arent coming on when it starts and not getting communication from vcim. Thank you!
I have a subscription but it does not show my trucks vin ? Do I add it because I have the same vx nano but it won't detect it
Im getting an error E4403 once I try adding the vehicle. I tried all the updates, tried skipping the updates, etc. And still will not work. Im on Windows 7 64bit
Just had a GM dealer tell me that SPS revoked the rights to enable/disable fog lights and DRL on older units (2002) Have you run into this at all with your subscriptions?
Hi, I'm about to buy an MDI2 device to diagnose my Saab 9-5NG, but I've found Your film, and I have to say I'm a bit confused now... MDI are expensive (originals), even clones are at least 2x more expensive than VCXnano. Do I understand that using the device You showed in this film lets us get all the same functionality as MDI, like tracing faulty parking sensors, burnt bulbs or... programming BCMs?? Thanks for this film, mate!
Can this change the remote start runtime? I tried to look it up but it doesn't give me all available options. 2015 Silverado. Thanks
Did the replacement module have the old vin in it? Does the programming overwrite the old vin with the real vin?
Hello, what type of Window's software are you using for your laptop, Sir?
I need to add rpo codes for steering wheel controls to the bcm. Can those be added this way?
Are you able to disable start stop feature. It’s incredibly annoying at every red light or heavy traffic.
@LOWBUCKLS I have a 2013 Silverado and am having TPMS issues that may be related to a faulty BCM. Is the VCX NANO still the tool you would purchase in 2024 or is there something better out now for a similar price?
Randy or anyone else know why GM only gives me Level 3 access? I need Level 1. Any help would be great.
i just watched this video, sounds like something I am going to give a shot. I have a 2006 cadillac cts, we bought couple months ago and had a problem pop up with the front turn signals coming on and staying on. I have done alot of research and it seems this may be a bcm problem. I just wanted to verify what all I would need to buy to replace my bcm with a used one. The ACdelcoTDS program obviously, but then do i need the Tech2 software? Assuming i need an OBDII adapter to usb, for connection to my laptop. i have my own OBDII sensor, not an expensive one though.
You won’t need the Tech2 software, just a cable (I’d recommend one of the OBDX Pro cables) and access to a TDS subscription. I’ve been told the process has changed a bit since I made this video, I’ll look into updating it.
So i dont need tech2win program to replace and reprogram a BCM for a 2007 Cadillac Escalade ESV?
Do you know if vcx nano also works to program audi a4 bcm with ACDelco TDS?
How did you add the vin after purchasing subscription?
hi can vxdiag interface VCX work with odis vxdiag software? Thank you
Can i program a vehicle to have cruise if it does not with this set up ??
Hey man , I got a 2017 Dodge Charger Scatpack with many BCM issues so I bought a used BCM I found for 90 bucks and now the dealership is saying I have to pay 150 to reprogram it and 400 to install it also and I’m not trying to do that lol you think this method would work for my year car since it’s kind of newer?
How do you add the VIN to the Subscriptions?
I need a little help I'm stuck on add vin I bought everything and can't get past mdi because it can't find it
What if the ignition won't turn on? The key does but it doesn't do anything that's why I'm replacing my bcm
❤❤❤❤
Will this program the pam aka parking assistant module too??
Can anyone walk me through installing this? I bought the connector and couple of the install steps confuse me
Does anyone know if they got rid of the TIS portal? it seems like its called TLC now ?
Do you use the SPS or SPS2 for a 2008 Hummer H3?
If you're good at soldering then you can just replace the 8 pin eeprom from your old bcm to the new one. No need to pack for a vxdiag and the acdelco stuffs 😁
what if the eeprom is burnt and thats why the bcm needs to be replaced?
@@jayway8612 then you're fucked 🤷🏻♂️
Hi. Can i buy from you software tech2? I have mdi but dont have soft... can u help me?
Yes I went through the process you detailed in your video and received an error message at the end of BCM reprogramming. I remember in a previous video you purchased Tech 2 on a 3 day trial did you still have that software in the system when you loaded the programs from VX Diag Nano?
No I deleted all of the previous software before installing the VCX Nano software. I’m not sure what could be causing that.
Did you find the problem?
Will this device work with Mazda vehicles like the cx9?
Question: I purchased the VXDIAG Nano and set it up with no problems. Purchased the 24 mon vehicle programming software from AC Delco but, it only says available not active any hints on getting it to active? BCM issue on 07 Avalanche.
Have you connected to the vehicle yet? I think mine may have said available until I connected to the vehicle for the first time.
scan tool capable to do this function "SDM PRIMARY KEY IN BCM" THE SCANNERS WITH SRS FUNCTION?????
why doesn't the vdxi come up to pick only shows me mdi and mdi2
how do I add my vin,, the "add vin" button doesn't lead to adding my vin
Hey Randy, I’m a little behind. Glad to see you throwing up some content! Do you happen to know if using this programmer and software if you can permanently get rid of the TPMS crap. Like you I’m not running the sensors and just tired of the warning.
No unfortunately this won’t work to disable the TPMS system, it will only program whatever options came with the VIN from the factory. There is a guy in the states that does custom BCM programming, that’s the only way I know of to disable TPMS. I’d love to learn how to do that but the guys who know how to do it are pretty secretive about their methods. Nice hearing from you again though!
So it doesn't matter even if the part number does not match?
Is this procedure/VCX module/software the same for a 2004 C5 Z06? I need to replace and reprogram the BCM, and possibly the ECU/PCM on my car that took some flood damage.
Clean those utters lol. Been there bud.
How did you add the vin to the account. I purchased the 1 activation. Do I need to install the TLC Program ?
Seems like your vin is already added but how do I add my vin. When I click add vin it wants to install the TLC Suite
How did u add ur vin
Please correct me if I'm wrong. But with this I can properly fix turn indicator Hyperflash. I have a 2013 suburban with Bcm controlled blinkers.
Do you have led bulbs installed?
@@xXIBON3ZIXx yes
@@Swiper1911 What you need is a load resistor wired in on your lights. Its cheaper.
I believe when using the 'replace ecm' option you should be starting the process with the original controller in place so the configuration can be retrieved and loaded into the new unit. I'm not sure if that would simplify the process or not?
You could be right, I should have tried it that way
@@LowbuckLS is it possible to hook up your laptop directly to the vehicle's usb ports? or is the scanner tool required to communicate with the vehicle and laptop?
@@jayway8612 I don't think it would work to connect directly to a USB port on the vehicle, you need some kind of interface between the computer and the vehicle.
Great information in this video. I have a 2006 Sa Vue that has been showing signs of a bad BCM, i.e., erratic fuel gauge, radio not working, cruise ctrl not working at times....and tonight, stalling, jerking when trying to accelerate, security light on while the vehicle is running, etc. Do you think these programming tools will reprogram a new bcm.....I have one on the way? Thanks!
Curious, will this allow to connect to tis2000 and gm tech 2 win for reprogram the CIM on a 9-3 saab?
Yes
@@deerhunter8533 yeah WAs able to get the job done a little over a year ago.
So basically like HPtuners for BCM ??
Im about to do this on my car. My BCM has a ton of issues. Question, will the reset effect the key security? Will the car still recognize the key fobs after its done? Or thats not an issue?
It wasn’t a problem when I did mine, the key fobs worked normally after the BCM swap.
Good stuff! Where did you get the sps and tech2win?
AC Delco tds
Hi, do you have any idea of how to setup SDM primary key in BCM for a 2014 chevy silverado, I bought the vcx nano to do the same procedure that yo did but I didn’t realize the tech2win won’t work on models 2014 above.
There’s gotta be a way to do it with the GDS2 application, unfortunately I don’t have a GDS2 compatible vehicle to connect to, and I can’t see the menus without being connected to a vehicle.
Here’s an article that explains how to do it on 2013 Malibu using the GDS2 software, the procedure may be similar for your truck: www.genuinegmparts.com/pdf/positionstatements/product-safety-sensing-diagnostic-module-reprogram.pdf
Will this work on a 2014 Caprice? I need a NEW BCM and don't want to deal with the dealer.
It should work, the process may be different in some details so this video may not apply exactly but it would still be done with the SPS system through the AC Delco TDS website.
Will this work on a 2002 Chevy s10?
Hi Randy. I'm prepping to replace the BCM in a 2011 Sierra 1500. The issue is the driver side turn signals (front & back) don't work but the hazards, passenger side turn signals and brake lights all work fine. I did the obvious and replaced the multi-switch in the steering column and checked/cleaned the wiring connectors between the BCM and the steering column (the top green plug I believe). I think this is an awesome video and will be giving it a try to see if a BCM replacement fixes the issue. I've got two questions I'm hoping you could answer: 1. Can Microsoft Edge work as the browser or does it have to be Internet Explorer? and 2. I noticed that there was no "key relearn" needed when you programmed the replacement BCM - was that because the ignition key you used to turn the truck to "ON" is automatically learned while the new program is being installed in the BCM? I'm hoping to have this done in about 10 days or so and will post an update here. Thanks again for the video!!!
Hi Randy. Here's my follow-up. It took a bit of effort to get the VCX Nano software loaded properly after it arrived a couple of days ago. The unit didn't come with the installation DVD and the programs like GDS2 and Tech2Win wouldn't install properly from the online link on the VXDIAG website (as administrator and with antivirus/firewalls turned off). Initially I did try loading the individual *.exe files for all the programs but the Tech2Win program wouldn't really work (I think it had to do with the MDI software missing something). I did find a 1.01 GB image (iso) file called "VXDIAG GM 2020.07 GDS2, Tech2Win and VX Manager 2021-04" under the heading of "GM DIAG" about 4/5th's down the page for this link: www.vxdiagshop.com/info/download/ that I eventually used to burn my own "Install DVD" which loaded like a charm for the GDS2 and Tech2Win programs. For some reason VX Manager wasn't installing without errors from the disk so I went to this site to install the Mar-21 version of VX Manager (which loaded with no issues): www.vxdiag.net/?lang=en Once the programming was installed I tried it out in the Sierra to confirm everything worked. Then I swapped in the BCM I got from a local Pick'n Pull yard and downloaded the new BCM program from the ACDelco TDS site (recent subscription still at $53.00 Cdn) just like you did in the video and it installed smoothly. One thing was when I tried to install the J2534 wrapper software I got a message that it didn't install. The good news is everything seemed to work ok without it. After all that I used Tech2Win to setup the SBM primary key and then tried out the Driver's side signal lights - which worked like a charm! Now I have to do a "crankshaft position variation" relearn (error P0315) and that should do it. Thank you so much Randy for making these videos to help do-it-yourselfers like me. Sharing your hard earned knowledge is greatly appreciated!
I have a question, Have you expirence any issue with the anti theft after programming the bcm?
I have same question
Have did u resolve this problem?
Great video! Is there a sheet that tells you what years this will work for? I have a 2001 Corvette that needs a new BCM programmed.
No
How did you add your vin?
Randy, did you ever get an error that the vin couldn’t be read? As well I don’t see a vxc nano option to select only the two Bosch units that you had at the top. Oh, I’m not sure where to add the vin for my one vehicle subscription for two years. Thank you
I mean VCX Nano
I’m having the same issue. I get an error message that says the username and password is already in use when I click add vin. Still sends me to start sps. Follow all the same steps but I don’t see the j2435 wrapper and it doesn’t see my vcx nano. I even tried opening a new account with a different email to see if I screwed something up. And I get the same thing. Did you resolve this issue?
I did figure it out. I didn’t have the j2435 installed in the tool settings. Now I’m getting errors when attempting to program the module (climate control seat module)
@@jeffgarner3903 how did you get it installed. I don’t have a driver showing up in settings either. When I run sps I don’t see the wrapper but a tech2 j2534 driver does show up. Is that what you installed?
Im getting an error E4403 once I try adding the vehicle. I tried all the updates, tried skipping the updates, etc. And still will not work. Im on Windows 7 64bit. Did you guys figure it out????
Hello after purchasing the 2 year subscription for my vehicle how do I add the vin without downloading the software ( tech line connect ). When I selected add vin I get redirect to download the files . And so I did the. I get a message I can’t connect do to proxy settings would you know how to fix this. Thank you for your time
I get the same thing. Did you ever figure it out?
Can this device program and code fuel injectors and glow plugs on a 2019 Chevy Silverado 2500 l5p duramax?
Can this device also do a manual dpf regeneration on that same vehicle?
Nope
It will only do stuff written by GM
Hi I have all installed on windows 10 that upgraded from windows 7 and the new J2534 wrapper won't install with Microsoft edge browser what can I do to get working thanks
In the video he said to use internet explorer and run it as an administrator.
So what are you doing now that gm has blocked this feature? Just a year ago I was able to program a used bcm to my 2016 Chevrolet Cruze but now with this tech line I can't do it on an 2015 Malibu I just got.
What has GM blocked? The nano is used as a passthrough for the acdelco SPS2 software... ?
How do I add my VIN I got no Vin added
About to try this on my '08 Hummer H3, btw, what do you use QGIS for?
I don't use QGIS much but occasionally use it to make my own maps from government data for 4x4ing and exploring the backcountry.
Hey Randy, What operating system is on your computer? I read somewhere that you need a windows 7 operating system. Thanks
I’m using Windows 10
Thanks for the help. Does it go back to 03.Its a diesel
DIC is Driver Information Center
For those of us who are computer, illiterate or at least think we are, who would you recommend to do this service for you.? I am in Southern California and I see there’s a lot of places to send off your BCM to either be fixed/repaired or cloned. I am getting a C0551:47 error in my body control module. I think it is defective. As a matter fact I’m pretty sure it is. I can get a good working body control module just like you did. There’s a service in New York, called G7 computers who can fix my existing damaged BCM.but they claim they can’t do any program such as inserting my Vin number into the existing BCM. Please help. I just bought a 2008 HHR. And I swear it is possessed.
How did the BCM fail?
Will this program the tcm.
Does the ACDelco / VCX Nano allow for PCM (powertrain control module) programming ~~ Anybody know??
I didn't see it in the drop-down during the video
Randy doesn't the mileage come from the BCM? How do you keep the correct mileage on the odometer in the donor BCM? Also what windows version are you using? They say windows 7 with 64 bit works best. Good video.
The mileage must not be stored in the BCM, it might be stored in the instrument cluster or something because the mileage on the odometer is correct even after swapping the BCM, I don’t need to do anything special. I’m using Windows 10.
It's stored in the gauge cluster...
@@LowbuckLS sorry to blow up your comments, but i need an answer if the laptop can hook up straight to a vehicle with usb ports? essentially avoiding the purchase of a diagnostic tool/scanner
@@jayway8612 No it's not possible to do it that way, would be nice but you need an interface tool between the computer and the vehicle.
@@LowbuckLS okay, thx for the reply
Hello, your BCM module that you installed and programmed was new or used?
It was used
@@LowbuckLS Ok, thanks, I thought you couldn't program used modules from other vehicles, greetings.
@@LowbuckLS Hola amigo y como hizo para cambiar el VIN del módulo? Por favor
@@LowbuckLS
Hi friend. thanks for the very good video. And how did you change the VIN of the module you replaced? to have the VIN of the truck