my mate had a P200E and I had the PX150 and it kept up with the P200E no problem, same crankcases so could easily upgrade the PXs, the only difference was I had an MB exhaust fitted, a road/rally pipe.
@@DennisRosberg-if2sj Hej. Det är gammal 93:a. Har beställt ytterligare ett lass med prylar till den, men just nu skall det åkas så jag börjar i vinter med de stora grejorna.
Greetings from Denmark 😊 Love your videos 👍🏻 I am thinking of buying the SIP alu rims for my PX. Are you satisfied with them and are they difficult to mount the wheels on? And last question, do you buy the 2.50 or the 2.10 size? Thanks in advance 🙏🏻
Hello. Thanks for the positive feedback. I do like the sip alu-rims a lot, especially compared to the original ones. They can be quite tricky to mount the tyres on, but once you’ve done it you will have no problem in the future doing it. I usually go for the 2.10. Or 2.10 in the front and 2.50 in the rear. But if you go for 2.10 on both you can switch front and back when the rear starts to get worn.
@@Nordicexplorer1 thanks for your reply 👍🏻 That’s a very good point about the same size on both fronts and the rear so you can switch. What about the 2.50, does it give any advantage or just the look ? Alternatively you can put 2.50 on both front and rear if you want the switch alternative?
@@Nordicexplorer1 ok, thanks again. I’m feel ready to buy them and put them on my PX now and looking forward to try them out 😎👍🏻 Have a great weekend 🙏🏻
I was pleased to see a fine-tuning tool 🔨 on the floor. I’ve often used one for those little adjustments. 😅
Always be prepared, you never know when you need to adjust something 😁
my mate had a P200E and I had the PX150 and it kept up with the P200E no problem, same crankcases so could easily upgrade the PXs, the only difference was I had an MB exhaust fitted, a road/rally pipe.
I’ve had some px150:s and they worked well.
But the last ones produced were very slow due to emissions regulations.
Vad är det för årsmodell på din px 200 nu? Gött att renoveringen börjar ta fart. Ser fram emot nästa projektvideo.
@@DennisRosberg-if2sj Hej.
Det är gammal 93:a.
Har beställt ytterligare ett lass med prylar till den, men just nu skall det åkas så jag börjar i vinter med de stora grejorna.
Greetings from Denmark 😊
Love your videos 👍🏻
I am thinking of buying the SIP alu rims for my PX.
Are you satisfied with them and are they difficult to mount the wheels on?
And last question, do you buy the 2.50 or the 2.10 size?
Thanks in advance 🙏🏻
Hello.
Thanks for the positive feedback.
I do like the sip alu-rims a lot, especially compared to the original ones.
They can be quite tricky to mount the tyres on, but once you’ve done it you will have no problem in the future doing it.
I usually go for the 2.10. Or 2.10 in the front and 2.50 in the rear.
But if you go for 2.10 on both you can switch front and back when the rear starts to get worn.
@@Nordicexplorer1 thanks for your reply 👍🏻
That’s a very good point about the same size on both fronts and the rear so you can switch.
What about the 2.50, does it give any advantage or just the look ?
Alternatively you can put 2.50 on both front and rear if you want the switch alternative?
@@Icantgetausernamedoh I don’t think you will see or feel any difference if you putt 2.50 on both.
The tyres will still be 3.50/10.
@@Nordicexplorer1 ok, thanks again. I’m feel ready to buy them and put them on my PX now and looking forward to try them out 😎👍🏻
Have a great weekend 🙏🏻