Although I'm a huge 45 fan I'd have to get the Glock 40 for hunting & such. Thanks for sharing your investment & burning the somewhat expensive ammo. Personally been shooting a pile of 9mm just out of economic necessity . God bless.
I didn’t realize the 10mm had a longer barrel. Makes me want one even more now! Also never heard .45 ACP referred to as 11.5mm. 😂 I’m gonna start messing with my friends with that one.
Thank you Sir. The G41 is my Everyday carry. I also keep another G41 under my pillow. I own 2 G41’s no need to change firearms from home to carry. It’s all my hands and eyes and soul know. I also like the 10mm as it’s a very nice big firearm . You did a great job. When I’m out in Wyoming or Montana up in the Mountains I carry a S&W 500 4’ But I wouldn’t mind a 10mm I just don’t need a 10mm however I know people who carry a 10mm. So this is a nice video 👍
I've owned 45s and the 10mm kicks much harder even harder than my 357 I had. Definitely has tons of power and speed. I love it though the recoil is very manageable with a long barrel and a compensator muzzle
I've never come across any of your videos before. I appreciate your approach; you spend enough time covering the parameters of each type of round accurately but still manage to move things right along. Your conclusions are also concise and useful... a good blend that keeps things interesting. Thank you for taking the time to share this with us. God bless. Miles
I got a Glock 40 thats magnaported to include the slide with a Trijicon SRO red dot. This was made by a firm that was providing guns to the Norwegian Border Guards for polar bear defense. I do have a big supply of Buffalo Bore Ammo. However I've not gotten around to shoot it yet.
That’s an impressive amount of different ammo which is appreciated. Seems like the chrono readings are measuring much lower than what they should be. I measured Sig’s 10mm 180gr load at 1260FPS using a Glock 40, which is very close to Sig’s spec. The same for the Federal Fusion. Maybe your chrono isn’t calibrated? Then again, some of the .45 ammo measured dead on manufacture’s spec. Can there really be that much variation from manufacture’s spec to reality? If so, they are deceiving their customers.
I haven't had any issues with my chronograph, but I'll admit I haven't had it calibrated. Not worth the expense and I don't doubt its relative accuracy.
This the first time I have seen your channel. Your presentation was concise and informative. I have never had a polymer pistol, Iam and have always been a 1911 guy, but should I get one, you make a good argument for a Glock.
@Len Robbins, thank you for watching and commenting. Since you are a 1911 guy - as am I - I hope you check out my Great Affordable 1911 Series where I reviewed 44 different 1911 pistols two at a time over the course of 22 videos. I've also reviewed many 1911 and 2011-style pistols since that series ended.
Thanks for the careful, measured comparisons. A comparison of group sizes at 25yards would really have rounded out this test, and may have reflected each load's precision a bit better than just the extreme spread. But still thank you for the careful, data-centric comparisons.
Great video!!! Subscribed!! Lots of good effort in you videos!! I personally do not own a G40 or G41 but very nice pistols. I do own a G21 Generation 4 & it’s my home & my EDC pistol loaded with Federal HST 230 grain +P JHP. I feel very safe & protected with my G21 & certainly trust my life with my Glock!!! God bless!!! 🇱🇷🇱🇷🇱🇷🇱🇷
This is interesting. I use underwood 200 hard cast in my G35 (.40) woods gun. I figured the 10mm with a 6'' barrel (same length as my G35) would be 300 fps faster, not approx 150-180. Great video, modern ammo is filling the gap and good man for showing all your misses. Great shooting at that range.
I own a Glock 41 SF Gen 4 (45 ACP 13+1) and am *very pleased* with it. In an urban environment, neighborhoods, I don't see the usefulness of a powerful 10mm. I do well with the 45 auto. I appreciate your comparison presentation, sir 👏🏼👏🏼👏🏼👏🏼👏🏼
A guy told me a hypothetical home defense scenario you need may need to hit an intruder through your refrigerator. He said a 10mm would definitely go through the refrigerator, out through the front wall of the house, into your neighbors house, and through their refrigerator.
@@diafplox1 The 10mm is way too powerful for urban environments, thus creating a high civil and criminal liability. Shooting intruders hiding behind a refrigerator is not only legally questionable but possibly closer to the chance of winning the lottery.
When it comes to an urban environment a proper 10mm setup can be safe and adequate. These model 40s are a different beast tho is my point. I wouldn’t never use my model 40 for home defense. But depending on projectile weight, powder load, barrel length, other 10mms can be very balanced for home defense. A light weight hollow point 10mm dissipates it’s energy and velocity faster than an average 45acp while having more stopping power. Shooting anyone is legally questionable by default, even an intruder.I’d take that lotto chance tho if my life was the prize.
Well Sir, you really did a fine job at no small effort or expense here. Well done! Answered a few questions in the back of my mine. Particularly appreciated the Horizontal lined graff. It instantly shows the difference in actual recoil in the different loads and calibres. ;
Excellent video !! Sequencially great presentation, very instructive and informative. I also would pick the 10mm for walking trails where larger or dangerous game may cross my path. One alternative to the .45 or 45 +P is the 45 Super; its cases are dimmensionally identical to the standard 45 auto but with a hotter charge and much stronger cases. I chronographed some Underwood 255 grains hard cast at 1080 fps, advertised velocity is 1075. It's a very potent load for the woods. Starline makes the brass and it's excellent. You have to use stronger recoil springs for the Super as well as possibly stronger magazine springs and firing pin spring in the 1911. You mention that you're used to the 1911. If you decided to use one, I would slow down the slide with a flat bottom firing pin stop, creating a better ignition with less escape of gas by slowing down the rear movement of the slide by perhaps one or two thousandth of a second which makes a more efficient, faster shooting cartridge by about 30 to 40 fps. It's important to never shoot a 45 Super load in a standard 45 semi auto that has not had a few improvements done to it such as stronger springs, possibly a buffer ahead of the recoil spring and stronger magazine springs. There are many educational videos on the cartridge. If you're already familiar with it, I apologize for my long post, otherwise either the +P or the Super make good trail guns. The Super being the definite winner in the 45 platform. I have both 10mm and 45 and like both which in my opinion are superb cartridges. I hope to see more of your presentations. Thank you for taking the time to do this very detailed one.
I appreciate your work. How about compare the Glock 40 to a 6 inch 357 Magnum for a Woods Walk/Hunting sidearm. They are different yet both are used for hunting.
@@RidersRange Good for you:) I'm battling cancer and I have been making sure my son has every type of gun I love in his inheritance. So I'm building him a couple of Glock 10mm's . I'm doing one G40 with a ridiculous 4port carver comp and engraving a Godzilla Logo on it for a Glockzilla theme. It's going to be a mile long hand cannon:) I love your videos keep up the good work sir. God bless America:)
That fantastic lens your test and demonstration I congratulate him for being well didactic the strength Jules who plays what style of bullets that shows that practicing with the same type of low according to the jules makes the performance much better I congratulate him I'm in Florida no one has done what you did 45 is the one I sleep with glock 41 mos
I haven't calibrated the chrono, but the .45 numbers are pretty close to factory specs. And 10mm ammo is often loaded more to .40S&W specs these days. Thanks for watching.
I’m stocked with .45 acp, so I’d have to go with that. Would a .44 magnum make a better anti-bear gun? You be the judge. Thanks for Sharing! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸
Not much beats a .44mag (okay, maybe a .50), but that's in a heavier gun with only 6 rounds. I like my .44s, but for a woods walk where there might be a concern, I'll take either the G40 or G41. As always, thanks for watching.
I had to double check if those first 3 different types of 10mm actually was 10mm lol. That's ridiculous out of a 10mm ! I get more power out of my Hornady Critical defense .40 in my M&P 40 4.25 inch barrel.
ACP means Automatic Colt Pistol. .45 ammunition is called .45 Automatic . Everyone incorrectly calls the ammunition .45 ACP. Yes, I know they label boxes that way. It is a very common mistake
The .45ACP (Automatic Colt Pistol) cartridge was designed in 1904 by John Browning to go along with the prototype Colt semi-automatic pistol, which Browning was also developing for the United States military trials. (The pistol was adopted in it's final version by the military in 1911.) In addition to the official cartridge designation of .45ACP, the cartridge has gone by other names, including .45 Auto, .45 Automatic and 11.43x23mm. All of those designations are for the exact same cartridge. But thinking they are different is a common mistake. Thanks for watching.
I have always carried a .45. I have always loaded with ball ammo to keep from the possibility of over penetration on a real target. I recently got the Glock 20 and 40 to complete my collection. Really LOVE rhe 40 long slide. I am considering carrying it, but my concerns are again over penetration. Not really seeing any ammo that I'm confident will stay in the target, and not come out the rear and compromise an innocent bystander. Anyone with suggestions, I'm all ears.
Many of the 10mm loads seem to be pretty much equivalent to .40S&W loads these days. (I plan a direct comparison in the near future.) If I were to carry a 10mm pistol, I would go for Federal Personal Defense Hydra-Shok, or Hornady Critical Duty. I definitely wouldn't use any FMJ rounds.
@Rider's-Range Critical Defence and Hydra Shocks might go thru 2-3 people lined up. Opposite of want I'm looking for. Not sure if they have the rounds for me to carry it out there. Guess I'm needing an equivalent of old .45 ball ammo in 10mm.
@Allen Yes sir , just regular old stuff. Just with .45 ball, I have never seen over penetration. For the most part stays in the body. For sure will stay in the head. 10mm ball I have, has an exit.
Your Glock 40 velocities are far less than what I got with an aftermarket 6" barrel in my Glock 20. They're even slower than the average I got with the factory 4.61" barrel. I have not chronographed the load in my Glock 40, but now I m curious to see if there is a significant difference. Glock 20, 4.61” barrel, 220 grain Buffalo Bore, 1150 fps average velocity Glock 20, 6” barrel, 220 grain Buffalo Bore, 1256 fps average velocity
Another Fantastic Video Sir!! Thank-you so much for all the work that goes into it. Class Act All The Way! Stay Safe my friend. 🤠👮🏻♂️🇺🇸👍🤠👻😉🌚🐉🍀. B9USA Sr.
I put a Kkm 10mm for my g41. It’s a lot of power in a light package. Unfortunately I’ve had reliability issues with it (in both 10 and hot 45). I’ve tried numerous things, nothing works. I’m curious if anyone else has put a 10mm in the G41.
I would not use a 10mm against bear. There are many reports of 10mm taking the entire mag to kill a bear and there was only 1 or 2 lucky shots that penetrated to the organs. It only take 1 255gr 45cal at 900 fps to stop a bear on its tracks. Maybe 1 more to kill it, but its not charging anymore. Do your research.
I did my research. There are more bear success stories with the 10mm than there are failures. Ballistically, the 10mm has superior penetration over the .45ACP - with the right ammo.
That could be interesting, but I'm not in a position to purchase a .45 Colt revolver and ammo. Then, to make it a fair comparison, I would have to get a 10mm revolver with comparable barrel length.
Most ammo companies seem to have watered down the 10mm. As much as I like my .44 Mag revolvers, I would take the G40 - with the right ammo - over my S&W Model 629. Thanks for watching.
Good video. The R.I.P. stands for "Ripping off Ignorant People" this trash is an overpriced POS round with about 3 to 4 inches of penetration...good if you want to piss someone off. After the tips break off, you have a non-expanding .22 cal projectile. There are many videos about this round...better off carrying a knife.
That myth was busted many years ago. Cast bullets won't hurt a Glock barrel any more than any other bullets will. It's my understanding that Glock added that warning as a legal protection against substandard reloaded ammo. But thanks for watching and commenting.
@@RidersRange Agree to disagree, And you are incorrect, And it’s concerning that you are promoting misinformation and subjecting yourself to a potential lawsuit from Glock by putting it out there on a public forum 🤦♂️
@Marshall Felter, I appreciate the discussion and your concern. My reply didn't contain anything that hasn't been on the Internet in many, many articles, posts and forums for a couple decades. And busting that myth has been well documented by more than just the armchair "experts".
@gastondraco5906m, the Federal and PPU 10mm are rather on the mild side, but the Underwood and Buffalo Bore are pretty much the standard for 10mm game ammo.
This is my first video of yours I’ve seen, however, I love several different aspects. Idk if this is your consistent format or not. However, I love the wide variety of ammo you use for each caliber, you show the box specs and real world specs of each round, you show the chrono footage and the close up recoil footage. Your commentary is informative and direct. Well done sir. Two great pistols and two great cartridges compared splendidly! 👍 🍻
Some of those velocities for the 10mm seem a bit low. I shoot really cheap Freedom Munition RNFP rounds for practice, and get much closer to the 1200+ fps marker from my G40.
I like the way you scold yourself when missing the targets. Keeping it G rated 😉. Something I don't seem to be able to do. Was surprised at some of the ES on the ammo. Looked like the "smaller named" companies were a bit closer. Great video thanks 👍
I have a SLR extended mag extension on my 10mm Glock mags. I have a G20 and a G40. They are supposed to be 5+ extensions and they do accept +5 but the 5th round makes it hard to rack the slide. It fits super tightly so I just add +4. Still not bad. It feels very reassuring to walk around or sleep with 20 rounds of 10mm in my gun. I keep spare mags of course but for a G29, G20 or G40, them SLR mags are they way to go. 👍
@@charlesleggett2546 I made a typo. I meant to say an extended slide release but extended magazines get my vote too. I think i got a couple 30 rounders that are Pro Mag at a gun show a while back so not factory... but i have gone out and tested them a couple times and they worked fine. but yes, for carry... 20 rounds of 10mm will definitely leave you feeling safe. LOL i hear ya.
@@charlesleggett2546 I have a Gen 4 G19 that i put an extended slide release on and i love it. Still need to do it with the G40. I'm taking a bunch of stuff to a gunsmith next week. Maybe i'll throw that in there as well.
@@rascalmatt6713 I was having a Gunsmith do all that stuff for me when I 1st starting doing customizations but it's super easy to do it yourself. You'll save a lot of money and time also. Once you do it, you'll see how easy it is. It's not hard at all.
Loved this entire video!!! I wish I had seen this earlier. It was completely informative and visually easy to follow. Thank you for taking the time to share!!!
I have a 40 with a Lone Wolf barrel and 22lb RSA and get much better deviation, accuracy and 100-200fps velocity increase putting the Underwood 220HC, 140 Penetrator and 155XTP well into the 800 ft lb range
Those 10mm are pansy loads. All of them. Put a 24lb recoil spring in the 41 and load Starline 45 Super brass with Ramshot Enforcer powder and 230gr coated 451 hard cast. Follow Ramshot's load data. You'll get over 1250fps.
I appreciate your comment. However, only a very small percentage of shooters hand load their own ammo. I tested a variety of over-the-counter ammo, including samples of the most potent ammo I could find.
Many companies seem to have down-loaded their 10mm to something close to .40S&W velocities. Maybe I should so a side-by-side with a G20 and G22 for velocity comparison.
@@RidersRange That would be interesting, particularly if you just used Federal ammo for comparison purposes. I think Federal keeps their 10mm loads on the light side on purpose, and it seems to be across the board with all their 10mm offerings. BTW, your channel is great!
That was a lot of work and a lot of expense. Thanks for all you do, I look forward to your videos every week.
Thanks for watching and for the supportive comment.
Although I'm a huge 45 fan I'd have to get the Glock 40 for hunting & such. Thanks for sharing your investment & burning the somewhat expensive ammo. Personally been shooting a pile of 9mm just out of economic necessity . God bless.
I'm with you. Thanks for watching.
Indiana allows me to hunt Whitetails with the 10mm, but not the .45ACP. There is a good reason why
First time seeing one of your videos. You are a great presenter. Clear, concise, and to the point. Thanks for your efforts
Thank you for watching and for your kind comment.
I didn’t realize the 10mm had a longer barrel. Makes me want one even more now! Also never heard .45 ACP referred to as 11.5mm. 😂 I’m gonna start messing with my friends with that one.
If I had the money, I'd have a .45ACP barrel made with "11.5mm ACP" engraved on it, just for fun.
Thank you Sir. The G41 is my Everyday carry. I also keep another G41 under my pillow. I own 2 G41’s no need to change firearms from home to carry. It’s all my hands and eyes and soul know. I also like the 10mm as it’s a very nice big firearm . You did a great job. When I’m out in Wyoming or Montana up in the Mountains I carry a S&W 500 4’ But I wouldn’t mind a 10mm I just don’t need a 10mm however I know people who carry a 10mm. So this is a nice video 👍
I've owned 45s and the 10mm kicks much harder even harder than my 357 I had. Definitely has tons of power and speed. I love it though the recoil is very manageable with a long barrel and a compensator muzzle
I've never come across any of your videos before. I appreciate your approach; you spend enough time covering the parameters of each type of round accurately but still manage to move things right along. Your conclusions are also concise and useful... a good blend that keeps things interesting. Thank you for taking the time to share this with us. God bless. Miles
Thank you for watching and for your kind comment.
The G 40 is “Thors Hammer “…just a beast…love it
You just have to feed it right - not the run-of-the-mill 10mm ammo that is not much more than .40S&W with a little Tobasco sauce. Thanks for watching.
I bought the G40 recently & just ordered a holster.
Black ryno with a streamlight TRL1HL.
Thank you for making the video.
I got a Glock 40 thats magnaported to include the slide with a Trijicon SRO red dot. This was made by a firm that was providing guns to the Norwegian Border Guards for polar bear defense. I do have a big supply of Buffalo Bore Ammo. However I've not gotten around to shoot it yet.
I throughly enjoyed your comparison! Keep 'em coming! 👍
That’s an impressive amount of different ammo which is appreciated. Seems like the chrono readings are measuring much lower than what they should be. I measured Sig’s 10mm 180gr load at 1260FPS using a Glock 40, which is very close to Sig’s spec. The same for the Federal Fusion. Maybe your chrono isn’t calibrated? Then again, some of the .45 ammo measured dead on manufacture’s spec. Can there really be that much variation from manufacture’s spec to reality? If so, they are deceiving their customers.
I haven't had any issues with my chronograph, but I'll admit I haven't had it calibrated. Not worth the expense and I don't doubt its relative accuracy.
This the first time I have seen your channel. Your presentation was concise and informative. I have never had a polymer pistol, Iam and have always been a 1911 guy, but should I get one, you make a good argument for a Glock.
@Len Robbins, thank you for watching and commenting. Since you are a 1911 guy - as am I - I hope you check out my Great Affordable 1911 Series where I reviewed 44 different 1911 pistols two at a time over the course of 22 videos. I've also reviewed many 1911 and 2011-style pistols since that series ended.
Underwood XTP 155gr 10mm is an excellent load to try.
As is the Underwood 240gr JHP +P .45 acp.( 1,000 fps)
Underwood doesn't make a 45acp 240 grain...only a 185..230 and 255
Great range testing and shooting Rider. Enjoyed the entire video
Once again, thank you for watching and commenting.
Thanks for the careful, measured comparisons. A comparison of group sizes at 25yards would really have rounded out this test, and may have reflected each load's precision a bit better than just the extreme spread. But still thank you for the careful, data-centric comparisons.
I've been thinking about getting a Ransom Rest so I could do controlled accuracy testing. Maybe someday. Thanks for watching.
Interesting. I own both and im curious what is your go too ammo for SD in G41. Great video, thanks for sharing 🇺🇸
Great video!!! Subscribed!! Lots of good effort in you videos!! I personally do not own a G40 or G41 but very nice pistols. I do own a G21 Generation 4 & it’s my home & my EDC pistol loaded with Federal HST 230 grain +P JHP. I feel very safe & protected with my G21 & certainly trust my life with my Glock!!! God bless!!! 🇱🇷🇱🇷🇱🇷🇱🇷
The 10 mm is a little more powerful than the 45 acp
Yes, it is.
Great in-depth video! Helped me out a lot with my decision
Thanks for watching.
Excellent review!
Thanks for watching.
Fantastic review sir......great information with an explanation 👏.
Thanks for watching.
This is interesting. I use underwood 200 hard cast in my G35 (.40) woods gun. I figured the 10mm with a 6'' barrel (same length as my G35) would be 300 fps faster, not approx 150-180. Great video, modern ammo is filling the gap and good man for showing all your misses. Great shooting at that range.
Thank you for watching and adding your thoughts.
Glock 40 has the same barrel as the Glock 24 in 40 cal
Awesome video and analysis
Thank you for watching.
I own a Glock 41 SF Gen 4 (45 ACP 13+1) and am *very pleased* with it. In an urban environment, neighborhoods, I don't see the usefulness of a powerful 10mm. I do well with the 45 auto. I appreciate your comparison presentation, sir 👏🏼👏🏼👏🏼👏🏼👏🏼
A guy told me a hypothetical home defense scenario you need may need to hit an intruder through your refrigerator. He said a 10mm would definitely go through the refrigerator, out through the front wall of the house, into your neighbors house, and through their refrigerator.
@@diafplox1 The 10mm is way too powerful for urban environments, thus creating a high civil and criminal liability. Shooting intruders hiding behind a refrigerator is not only legally questionable but possibly closer to the chance of winning the lottery.
When it comes to an urban environment a proper 10mm setup can be safe and adequate. These model 40s are a different beast tho is my point. I wouldn’t never use my model 40 for home defense. But depending on projectile weight, powder load, barrel length, other 10mms can be very balanced for home defense. A light weight hollow point 10mm dissipates it’s energy and velocity faster than an average 45acp while having more stopping power. Shooting anyone is legally questionable by default, even an intruder.I’d take that lotto chance tho if my life was the prize.
@@diafplox1 That's your opinion. I prefer the 45 auto.
@@v.german11bi prefer versatility.
Liked and subscribed! Well done!
Well Sir, you really did a fine job at no small effort or expense here. Well done! Answered a few questions in the back of my mine.
Particularly appreciated the Horizontal lined graff. It instantly shows the difference in actual recoil in the different loads and calibres. ;
Thanks for watching and commenting.
Excellent video !! Sequencially great presentation, very instructive and informative. I also would pick the 10mm for walking trails where larger or dangerous game may cross my path. One alternative to the .45 or 45 +P is the 45 Super; its cases are dimmensionally identical to the standard 45 auto but with a hotter charge and much stronger cases. I chronographed some Underwood 255 grains hard cast at 1080 fps, advertised velocity is 1075. It's a very potent load for the woods. Starline makes the brass and it's excellent. You have to use stronger recoil springs for the Super as well as possibly stronger magazine springs and firing pin spring in the 1911. You mention that you're used to the 1911. If you decided to use one, I would slow down the slide with a flat bottom firing pin stop, creating a better ignition with less escape of gas by slowing down the rear movement of the slide by perhaps one or two thousandth of a second which makes a more efficient, faster shooting cartridge by about 30 to 40 fps. It's important to never shoot a 45 Super load in a standard 45 semi auto that has not had a few improvements done to it such as stronger springs, possibly a buffer ahead of the recoil spring and stronger magazine springs. There are many educational videos on the cartridge. If you're already familiar with it, I apologize for my long post, otherwise either the +P or the Super make good trail guns. The Super being the definite winner in the 45 platform. I have both 10mm and 45 and like both which in my opinion are superb cartridges.
I hope to see more of your presentations. Thank you for taking the time to do this very detailed one.
I just found this comment, so sorry for the delay in answering. Thanks for watching and adding your thoughts.
GREAT SHOOTIN' TEX! THANK YOU FOR THIS DEMO!
Thank you for watching.
I appreciate your work. How about compare the Glock 40 to a 6 inch 357 Magnum for a Woods Walk/Hunting sidearm. They are different yet both are used for hunting.
Hmmm.....I hadn't thought of that. Thanks for the idea. And thanks for watching.
Great video! Thank you.
Thanks for watching.
I have absolutely no doubt that my first shot with either gun would hit dead center... of the the chronograph.
Hmmm....Thanks for watching.
I can bet from your Glock hat and all your gear that you probably have a collection of Glocks. I just bought a G40 and it is super cool 😎
Just a small collection of 16 Glocks, but they certainly aren't my favorite brand. Thanks for watching.
@@RidersRange Good for you:) I'm battling cancer and I have been making sure my son has every type of gun I love in his inheritance. So I'm building him a couple of Glock 10mm's . I'm doing one G40 with a ridiculous 4port carver comp and engraving a Godzilla Logo on it for a Glockzilla theme. It's going to be a mile long hand cannon:) I love your videos keep up the good work sir. God bless America:)
Enjoyed the video. Thank you.
Enjoyed the comment. Thank you for watching.
That fantastic lens your test and demonstration I congratulate him for being well didactic the strength Jules who plays what style of bullets that shows that practicing with the same type of low according to the jules makes the performance much better I congratulate him I'm in Florida no one has done what you did 45 is the one I sleep with glock 41 mos
Some of Those 10mm numbers seem really low for a 6 inch barrel. Are you sure your chrono is accurate?
I haven't calibrated the chrono, but the .45 numbers are pretty close to factory specs. And 10mm ammo is often loaded more to .40S&W specs these days. Thanks for watching.
I’m stocked with .45 acp, so I’d have to go with that. Would a .44 magnum make a better anti-bear gun? You be the judge. Thanks for Sharing! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸
Not much beats a .44mag (okay, maybe a .50), but that's in a heavier gun with only 6 rounds. I like my .44s, but for a woods walk where there might be a concern, I'll take either the G40 or G41. As always, thanks for watching.
I had to double check if those first 3 different types of 10mm actually was 10mm lol. That's ridiculous out of a 10mm ! I get more power out of my Hornady Critical defense .40 in my M&P 40 4.25 inch barrel.
Run-of-the-mill 10mm seems to be about .40S&W velocity these days, but I had to test it. Thanks for watching.
hell yea great video subscribed my friend
first time viewer, great video.
Thank you for watching and commenting.
With most of those 10mm loads, you might as well be shooting 40S&W.
Most 10mm loads seem to be pretty watered down these days. I plan a chronograph comparison between 10 and .40 this summer.
I want a. 10mm but don’t want too many calibers
I know the feeling. Thanks for watching.
Did you buy the 41 and have the dot cut for? Or did you buy it with the rmr cut already? Thanks
I bought the G41 MOS - Modular Optics System.
You should check out those 155 xtp in 10 mL from Underwood
I have 10mm Underwood, but I didn't have comparable .45 ammo. I was trying my best to compare similar ammo through each gun. Thanks for watching.
Carried the Hydra Shok for 20 years in my Sig P220 duty weapon.
That's what I carried in my Glock for part of my career. I still have some. Thanks for watching.
How many times did you have to use it?? Other than quals
The cadence you used on Gold Dot 200 would shorten the presentation
My first time seeing your video also I subscribed..
I just found this comment, so sorry for the delay in answering. Thanks for watching, commenting and subscribing.
Thanks for the video
Thanks, great video!
Thank you for watching.
ACP means Automatic Colt Pistol. .45 ammunition is called .45 Automatic . Everyone incorrectly calls the ammunition .45 ACP. Yes, I know they label boxes that way. It is a very common mistake
The .45ACP (Automatic Colt Pistol) cartridge was designed in 1904 by John Browning to go along with the prototype Colt semi-automatic pistol, which Browning was also developing for the United States military trials. (The pistol was adopted in it's final version by the military in 1911.) In addition to the official cartridge designation of .45ACP, the cartridge has gone by other names, including .45 Auto, .45 Automatic and 11.43x23mm. All of those designations are for the exact same cartridge. But thinking they are different is a common mistake. Thanks for watching.
I have always carried a .45. I have always loaded with ball ammo to keep from the possibility of over penetration on a real target. I recently got the Glock 20 and 40 to complete my collection. Really LOVE rhe 40 long slide. I am considering carrying it, but my concerns are again over penetration. Not really seeing any ammo that I'm confident will stay in the target, and not come out the rear and compromise an innocent bystander. Anyone with suggestions, I'm all ears.
Many of the 10mm loads seem to be pretty much equivalent to .40S&W loads these days. (I plan a direct comparison in the near future.) If I were to carry a 10mm pistol, I would go for Federal Personal Defense Hydra-Shok, or Hornady Critical Duty. I definitely wouldn't use any FMJ rounds.
@Rider's-Range Critical Defence and Hydra Shocks might go thru 2-3 people lined up. Opposite of want I'm looking for. Not sure if they have the rounds for me to carry it out there. Guess I'm needing an equivalent of old .45 ball ammo in 10mm.
Isn't ball ammo just regular Full metal jacket ? Which penetrate a lot . There is usually no expansion with it.
@Allen Yes sir , just regular old stuff. Just with .45 ball, I have never seen over penetration. For the most part stays in the body. For sure will stay in the head. 10mm ball I have, has an exit.
@@tcjohnson3437 I would think that would definitely blow right through the average person, I could be wrong though
😂😂I love this video so much, absolutely hilarious!
I just want to recognize that you corrected the factory pig nose on both of those guns before you showed them to anyone.
??? Either you comment was tongue-in-cheek, or I'm missing something here. With the exception of the optics, both guns are box-stock.
Your Glock 40 velocities are far less than what I got with an aftermarket 6" barrel in my Glock 20. They're even slower than the average I got with the factory 4.61" barrel. I have not chronographed the load in my Glock 40, but now I m curious to see if there is a significant difference.
Glock 20, 4.61” barrel, 220 grain Buffalo Bore, 1150 fps average velocity
Glock 20, 6” barrel, 220 grain Buffalo Bore, 1256 fps average velocity
Lots of factors may impact velocity and I've found that some quality aftermarket barrels produce slightly higher velocities than some factory barrels.
@@RidersRange I've experienced the same effect, but not to such a high degree. I agree it is hard to qualify.
Another Fantastic Video Sir!! Thank-you so much for all the work that goes into it. Class Act All The Way! Stay Safe my friend. 🤠👮🏻♂️🇺🇸👍🤠👻😉🌚🐉🍀. B9USA Sr.
Once again, thank you very much for watching and for your kind comment.
I put a Kkm 10mm for my g41. It’s a lot of power in a light package. Unfortunately I’ve had reliability issues with it (in both 10 and hot 45). I’ve tried numerous things, nothing works. I’m curious if anyone else has put a 10mm in the G41.
I haven't tried a KKM barrel.
I would not use a 10mm against bear. There are many reports of 10mm taking the entire mag to kill a bear and there was only 1 or 2 lucky shots that penetrated to the organs. It only take 1 255gr 45cal at 900 fps to stop a bear on its tracks. Maybe 1 more to kill it, but its not charging anymore. Do your research.
I did my research. There are more bear success stories with the 10mm than there are failures. Ballistically, the 10mm has superior penetration over the .45ACP - with the right ammo.
Great video.
Thank you.
That was amazing! That you!
Thanks for watching.
Where'd you get that hat!?
I'm guessing that's more than 30 years old. I probably got it at some Glock event - Armorer's school maybe?
Also try 150gr it is fast
Good stuff
Thanks for watching.
Thanks alot
Thanks for watching and commenting.
I would like to
To see 45 colt go against the 10 mm with comparable ammo
That could be interesting, but I'm not in a position to purchase a .45 Colt revolver and ammo. Then, to make it a fair comparison, I would have to get a 10mm revolver with comparable barrel length.
Enjoyed it. RockOn.
Thanks for watching.
More G40 videos!!!!
My video of the G40 shooting both 10mm ammo and .40 ammo over a chronograph will go public this coming week. Thanks for watching.
Try 90 gr
Damn gotta get me a 40 now 🥲
I recently filmed the G40 with both 10mm ammo and .40S&W ammo over the chronograph. Stay tuned.
Need same weight round on both sides
I got as close as I could with the ammo that was available.
These guns not enough velocity .gonna go back to my 44magnum
Most ammo companies seem to have watered down the 10mm. As much as I like my .44 Mag revolvers, I would take the G40 - with the right ammo - over my S&W Model 629. Thanks for watching.
Good video. The R.I.P. stands for "Ripping off Ignorant People" this trash is an overpriced POS round with about 3 to 4 inches of penetration...good if you want to piss someone off. After the tips break off, you have a non-expanding .22 cal projectile. There are many videos about this round...better off carrying a knife.
I've seen several reviews of various R.I.P. rounds and the results are mixed. I'll stick with more conventional ammo. Thank for watching.
Glock man sized x 2
Definitely.
😎👍
As always, thank you for watching and commenting for the algorithm.
Not good idea shooting hard cast bullets through a Glock barrel
That myth was busted many years ago. Cast bullets won't hurt a Glock barrel any more than any other bullets will. It's my understanding that Glock added that warning as a legal protection against substandard reloaded ammo. But thanks for watching and commenting.
@@RidersRange
Agree to disagree,
And you are incorrect,
And it’s concerning that you are promoting misinformation and subjecting yourself to a potential lawsuit from Glock by putting it out there on a public forum 🤦♂️
@Marshall Felter, I appreciate the discussion and your concern. My reply didn't contain anything that hasn't been on the Internet in many, many articles, posts and forums for a couple decades. And busting that myth has been well documented by more than just the armchair "experts".
…and the winner is: Glock 40 all day long!
You mean you like a 10mm better than an 11mm? Thanks for watching.
@@RidersRange It means I like 670 ft/lbs of energy vs 350 ft/lbs. Or put another way….. 37,500psi vs 21,000psi (SAAMI specs).
Next question?
Basically Federal loads weak ammo
Most of the major 10mm ammo is not much stronger than .40S&W. Check my review on 10mm vs .40 out of the same gun.
RIP rounds 🚮
I test what I can get. Thanks for watching.
@@RidersRange I appreciate your work. I’m staying in general.
That’s is some pathetic 10mm ammo
what would you recommend ? Guy fired Underwood and Buffalo Bore.
@gastondraco5906m, the Federal and PPU 10mm are rather on the mild side, but the Underwood and Buffalo Bore are pretty much the standard for 10mm game ammo.
really good video. no BS.
Thank you for watching.
Who gives a Frak?
Some folks actually may be interested.
Yah, unhinged losers!!
I knew 10mm moved but damg thats alot faster
With the right ammo, the 10mm is a decent defense gun.
This is my first video of yours I’ve seen, however, I love several different aspects. Idk if this is your consistent format or not. However, I love the wide variety of ammo you use for each caliber, you show the box specs and real world specs of each round, you show the chrono footage and the close up recoil footage. Your commentary is informative and direct. Well done sir. Two great pistols and two great cartridges compared splendidly! 👍 🍻
Enjoyed it. RockOn.
👍
Thanks for the video. Good information
Thanks for watching.
I hav a G40 and I love it! Need to get a G41 in my collection!
Well great video…
But my favorite is the Glock in 45 with the 230gr Corbon..
But Iam really Old…😂
Well, thank you for watching and commenting.
Some of those velocities for the 10mm seem a bit low. I shoot really cheap Freedom Munition RNFP rounds for practice, and get much closer to the 1200+ fps marker from my G40.
The sig fmj loads shoot around 1190. It's not bad.
Buffalo bore and Underwood load their 10mm loads right. There's a reason the heavier load went faster than the 180 grain loads.
@YoungBoy Never Broke Again because everyone else loads them to 40 pressure and not what a 10mm should be.
The Glock 41 is my bedside firearm. Absolutely love it. Thank you very much for this video. You put a lot of work into it.
Same here!
@MDpolo Gun Channel, I'm thinking about repeating it using the Mantis X so I can actually graph the difference. Thoughts?
I like the way you scold yourself when missing the targets. Keeping it G rated 😉. Something I don't seem to be able to do. Was surprised at some of the ES on the ammo. Looked like the "smaller named" companies were a bit closer. Great video thanks 👍
As always, thank you for watching and commenting.
Always enjoy your video's this in no exception great job and as per usual great shooting. Thank you for your efforts.
Thank you again for watching and commenting.
45 acp = 11.5mm 😮😮😮😮 I never knew that thanks for that information boss man
That's why I put the .45ACP (11mm) KHX Pro in my Eleventh Day of Christmas short that will go public tonight. Thanks for watching.
If i could change one thing about the G40 it would be to put an extended mag release on it.
I have a SLR extended mag extension on my 10mm Glock mags. I have a G20 and a G40. They are supposed to be 5+ extensions and they do accept +5 but the 5th round makes it hard to rack the slide. It fits super tightly so I just add +4. Still not bad. It feels very reassuring to walk around or sleep with 20 rounds of 10mm in my gun. I keep spare mags of course but for a G29, G20 or G40, them SLR mags are they way to go. 👍
@@charlesleggett2546 I made a typo. I meant to say an extended slide release but extended magazines get my vote too. I think i got a couple 30 rounders that are Pro Mag at a gun show a while back so not factory... but i have gone out and tested them a couple times and they worked fine. but yes, for carry... 20 rounds of 10mm will definitely leave you feeling safe. LOL i hear ya.
@@rascalmatt6713Ok, Did you change out the release?
@@charlesleggett2546 I have a Gen 4 G19 that i put an extended slide release on and i love it. Still need to do it with the G40. I'm taking a bunch of stuff to a gunsmith next week. Maybe i'll throw that in there as well.
@@rascalmatt6713 I was having a Gunsmith do all that stuff for me when I 1st starting doing customizations but it's super easy to do it yourself. You'll save a lot of money and time also. Once you do it, you'll see how easy it is. It's not hard at all.
Loved this entire video!!! I wish I had seen this earlier. It was completely informative and visually easy to follow. Thank you for taking the time to share!!!
Thanks for watching and commenting.
🗡️NRA⚡AOR🛡️
Thanks for watching.
great video ..im going with 10mm thats answered my question ..thanks mate
Thanks for watching.
I have a 40 with a Lone Wolf barrel and 22lb RSA and get much better deviation, accuracy and 100-200fps velocity increase putting the Underwood 220HC, 140 Penetrator and 155XTP well into the 800 ft lb range
That's not surprising. Thanks for watching and adding your thoughts.
Those 10mm are pansy loads. All of them. Put a 24lb recoil spring in the 41 and load Starline 45 Super brass with Ramshot Enforcer powder and 230gr coated 451 hard cast. Follow Ramshot's load data. You'll get over 1250fps.
I appreciate your comment. However, only a very small percentage of shooters hand load their own ammo. I tested a variety of over-the-counter ammo, including samples of the most potent ammo I could find.
In 10mm, Federal is notoriously weakened. Their 10mm and 40 S&W loads are practically equal.
Many companies seem to have down-loaded their 10mm to something close to .40S&W velocities. Maybe I should so a side-by-side with a G20 and G22 for velocity comparison.
@@RidersRange That would be interesting, particularly if you just used Federal ammo for comparison purposes. I think Federal keeps their 10mm loads on the light side on purpose, and it seems to be across the board with all their 10mm offerings. BTW, your channel is great!
Thank You Sir for this excellent video. Well done.
Thank you for watching.