Polishing The Garage Paint Job
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- In this video, we will continue the repair procedure on my Corolla tailgate. We're doing all the work out of my garage.
Orbital Sander link: spraygunsdirec...
Merch Link:
www.spraygunsd...
Website: thegunman.net.au/
Subscribe & Hit The Bell!!
Second Channel, The Gunman RAW: / @thegunmanraw
Gunman's World, lifestyle videos. / @gunmansworld4314
Social Media Links:
BitChute:
www.bitchute.c...
www.bitchute.c...
Rumble: rumble.com/c/c...
Odysee: odysee.com/@Th...
Instagram: / the__gunman
Twitter: / gunmanthe
TikTok: / the_gunman_painter
COLAD BLADE LINK:
After having a lot of questions about the blade I use while masking a car I decided it easier to include a link to the product here.
www.spraygunsd...
Health & Safety Notice:
All of my videos are made in good faith for
entertainment & to help people learn my methods.
Many of the materials I use in my videos are
highly toxic & can be harmful to the human body.
If you are unsure of the health risks of any products
please refer to the MSDS (Material Safety Data Sheet)
or TDS (Technical Data Sheet) all products have one,
available online these days but your supplier should print
on request, follow outlined precautions or you may be putting
your health at risk. After watching this video
"Get out there and Paint Some SH!T"
Music from NCS
Follow NCS
Spotify → bit.ly/SpotifyNCS
Twitter → / ncsounds
Google+ → google.com/+noc...
Facebook → / nocopyrightsounds
Soundcloud → / nocopyrightsounds
![ILLSLICK - WINTER IS COMING [Official Video]](http://i.ytimg.com/vi/dwTMeM1zIhQ/mqdefault.jpg)
I have been doing it since the 1970s and I am still learning. Your too use to a downdraft booth I use 2 air cleaners wet the floor and squeegee it out or blow the floor and use a furnace to blow it out. Pretty clean lately never use to be that good
Hi!
I’ve been inspired by you and your channel for quite a while. You’re fare better than me when it comes to painting.
One thing surprises me, though!
You have 100 times as much subscriber’s as I have, and one of the first things that I learned when I started my channel was to look in the camera not in the screen beside the camera.
My humble suggestion an advice is to look in the camera and not at the side screen.
I really like your channel , so this was only friendly advise/Question
Regards from Sweden
I put my compound on the same way gunny! I just feather the trigger till i get it spread out so it dont sling everywhere and polish on!
Like a true painter 🤘😜
Hi Gunny, Nice work once again :) . I've just finished painting and polishing a Tuxedo Black VK Calais and learnt a lot trying a few different polishing methods and products along the way. I've got some of the Sonax PROFILINE NANO POLISH 03-06 which i tried using as an intermediate cut and it worked quite well. The problem I found with it was that any 'splatter', unless cleaned off would stain. I made the mistake of letting the splatter dry in one area and came back the next day and it wouldn't wipe off. Tried a wet rag, tried carwash, tried prepsol, nothing would remove the splatter spots. Had to polish it again to get rid of the spots. Any splatter from the other polish I used (Colad One-Step) would wipe away, even after a day or so drying time.
I have had that experience with sonax perfect finish. An absolute nightmare to get it off.
If You like the Flex sander you need to try the Merka brushless electric DA. The Merka Is much lighter and feels like a normal palm sander.They do the Merka in a 5mm orbit and a 2.5mm for fine sanding
Very informative video Gunny, I do prefer it when you talk live to the camera while you are working I just think you give more info on what you are doing at any given moment, doing a voiceover is fine but it's sometime hard to remember every detail plus as you say it must take twice as long to edit.
That sander looks very nice mate and it sounds the same as my electric Mirka Deros which is a great bit of kit, like you I changed from air to electric sanders but for me it was a case of my poor compressor was complaining each time I used an air tool on it.
I remember you painting that roof Gunny and was surprised to see how bad it's got in a relatively short time, I thought the Quartz clear would have lasted longer but at the end of the day it is a cheapish product.
I told you I got a Sata X5500, used it for the first time today and have to say I love it, the finish was as good as my DV1 so for the first time I can't complain, hopefully it will get better as I get used to it.
Thanks for doing these home/diy type videos Gunny I'm finding them very interesting 🙏👍 John UK.
hey gunny watched the video and must say it's really good that you do these kind of videso so that home garage painters or do it your self guys can have some ideas how to sand and buff keep up the good work cheers from Trinidad and tobago
What we use at bmw, is finishing with 3000 wet, and then 1 step purple 3m paste. On darker colors i go over with the yellow 3m compound. Polishes like a charm on the new glasurit supreme clear
glasurit clear of course it will be awesome. Thats top basf clear iirc
Looks good from here
As a long-term part-timer, I often come back to watch your vids when a job screws up. Thanks mate you are real asset.
I have a suspicion about 2 stage or hybrid buffing compounds, I have not been getting good or immediate results.
The 3M Perfect-it multistage compound was supposed to be the bees knees. I'm not impressed.
As I understand it, you apply the compound and it decomposes with heat from a course cut to a finishing compound....job done. ??
That may be the case in a high turnover shop. However, I am in hot Queensland and it seems that half the container has now degraded to near useless.
This came at a great time. I just painted my truck and for the most part it came out pretty well. Some orange peel in spots and a little bit of dust on the horizontal parts The vertical parts were nearly dust free and I attribute that to wetting the floor down throughout the whole paint job. I didn't rewet the floor before i put the final coat of clear on and thats when the dust showed up. I had tacked between all base coats and the first 2 coats of clear had nothing in them but that third coat got some dust because of it I'm sure of it and also I was getting tired and just wanted to finish it and I was a little lax in not cleaning the air hose off before the third coat. It was a long day. I was expecting to have to cut and buff which is why I put 3 coats of clear on it in the first place. The hood was the worse, everything else came out great.
Sonax products rock!, thanks Gunny!
I enjoyed this format, looks great, thank you as always for all of the detail.
I sanded a 5" scratch on my Benz with 1500 grit then polished with a DA, medium pad and fine Rupes Keramic gloss polish and it looks amazing. I had no idea I needed to sand all the way down to 5000
You don't need to but it makes it easier to polish
@@TheGunmanChannel Right on man, thanks. Been subbed to you for years, keep rockin!
Hey bud, I had the same issue u had using the sanders at work and losing feeling or tingles in the fingers but it ended up being tight forearms. If u go see a physio they can sort ya out. Haven't had it since.
I like your polishing videos, you've got very healthy approach to it, unlike some equipment obsessed detailers.
Nice Job Gunny 👌🏻👍🤙
Haha that dog is cute as shit.. just chilling with dad in the garage lol. Sweet video. That little sander is awesome.
Skye barely leaves my side these days 😂
@@TheGunmanChannel haha that's how my dog is. Seems sometimes that's the only friend I have lol. Hope your doin well bro.
@@robbyzieroff9775 and I can guarantee its the best friend you'll ever have.
@@TheGunmanChannel truth!
I noticed that your little furry workshop foreman was making sure you were being safe. Enjoyed this video thanks Gunman. Interesting to see in a previous video that you had the tin of clear (or colour can’t remember?) in a bucket of warm water pre spraying. Things you have to do in Melbourne in autumn eh?
Great video as always. I use the 3m range but always willing to try others.thankyou.taj
I like the talking to camera, we get the fresh unadalterated gunny
Big fan of your videos mate.
I've recently purchased a sagola 3300 gto 1.4mm with a tech cap, however I wish to know. How it will perform with 2k direct gloss..
As I'm struggling to find anything besides base/clear videos in a 1.3mm
Perhaps if possible I'd love to see a demo and review..
Keep them videos rolling 🙏
Your garage paint job looks lot better than an so call average high end body shop here in the states. Lol
Great video man! I enjoyed your at home videos and one day want to repaint some of the body panels on my car. This series has definitely given me some more confidence. Also have you tried Griots fast correcting cream? It doesn't cut as well as the Sonax Ultimate cut but it leaves a really nice finish despite being able to cut through 1500-2000 grit scratches decently well depending on pad, I usually can just skip the finer polishes and it will still be really glossy. It's also wipes off super easily and doesn't splatter as much compared to Sonax which I find a bit oily. I only use the Sonax when I need the extra cut.
Great video gunny. I would loved to see you finish out those panels. Sonax is what I use and it's a great system. Your marring could come from your pad selection, the pad is to rough for your paint. Adjust the pads and you'll be fine. 👍
Thanks man. As for the marring I've tried every pad I could, even the ultra fine microfiber, but still there. Sonax is great. Hope you've been well mate, thanks for watching.
@@TheGunmanChannel maybe it's time you check out a different set of pads? I always use a 15mm DA to finish. Of course in my work it's all about the finish work. Lake country makes great pads and a great option for you mate. Life is good. Love your channel. 👍 You've taught me a lot about the painting aspect.
HI GUNNY ITS A LIKE FROM ME ! HOPE YOUR HAVING A GREAT WEEKEND MATE OVER THERE LOOKING FORWARD TO THIS VIDEO ..
Best of the best gunny brother 💞❤️✌️🙏👑👑👑👑👑
Your garage at home is better equipped than my work 🤣🤣🤣
😂😂
Check out the 3M Microfinishing Film 268L LR3 40ù Diamond sanding disc's mate expensive but non better.
I am a new convert to dry. My father always done hell sick paint work but always finished with wet sand. Not sure if the old paper couldn't clean itself as efficiently as wet.
It's more that the old paint clogged the paper, acrylic was sticky stuff
Gunny have you heard/seen people use cardboard to sand with? When paint just goes over the edge instead of using sandpaper?
Hey gunman hope you’re doing well, I’ve been watching your content recently and am heavily considering becoming a spray painting apprentice. I’m 19, At the moment I was doing carpentry but have been very interested in spray painting. The work looks satisfying and something id like to do as a career but when I decided to visit one of the top smash repair shops in my area and asked the workers about the work, a lot of them told me to have a think about other career choices. The 3rd apprentice mostly talked about how the industry isn’t future proof, and with the rise of electric vehicles he believed in 20 years or so when electric becomes the norm everyone will have set their cars on autopilot to drive and the rates of accidents will decrease significantly meaning smash repair shops will eventually die out or be low on work. I was wondering what your thought on this would be like? I know right now the industry can be very lucrative but im unsure on the future. Thank you for reading!
Auto pilot might prevent major accident at some point if they ever figure it out, but it's not going to prevent paint damage in parking lots, or while parking. All of the "self-parking" tech I've seen so far is a total joke.
So a few years (10 or more) the 'short throw' D/A sanders were touted as great for clear (3/32" vice 3/16"). Well I found out from the 3M rep that TRIZACT was specifically designed to work with any normal D/A (3/16" throw). Sorta threw my money away with that purchase eh?!
The tingling fingers stuff sounds like vibration damage? Known as Vibration-induced white finger
I heard it called HAVS Hand Arm Vibration Syndrome
@@TheGunmanChannel Yeah that too, the white finger is what happens when exposed to cold, but as you live in australia I guess that's one problem you don't have! I have taken to using gloves with certain tools to absorb vibrations. I have a festool sander I got 2nd hand and it's quite incredible how little it vibrates compared to my bosch sander.
👍
Quick question from the polishing...have you used a atom x88 infinity spray gun
I have not.
@@TheGunmanChannel no worries love your work💪💪
Great content as always Gun Man ! Question to all my body men here... I'm going to paint my sandblasted rims, primed with epoxy and urethane, what would be the best paint in your opinion, single stage or base coat / clear coat or others...? Thank you !
Most painted rims today are clear coated but if i were doing an antique wheel of sorts i may opt to the single stage for authentics. Or powder coated.
@@luisvega1294 thx ;)
I kept hoping the doggie pop by hehehe
Hey Gunny, I painted my mini about 1 mouth ago and today I noticed some very faint out lines around some of my filler repairs. What would you recommend doing in this situation?
You will be able to polish it out. Just basically follow the procedure I did here, 2,000 then 3,000 then polish. If it's a light metallic like silver you may still see it slightly.
Buona sera Sig gum man le potrei fare qualche domanda visto che è da poco che mi sono iscritto ma la seguo da un bel pò, sempre se mi vuole dare qualche dritta io ho una sata b rp 3000 e la ho impostata così come le sto per spiegare l'aria alla base de calcio a 2 bar apertura della mandata prodotto tutta aperta fino affine battuta la distanza dal supporto circa 15 cm ma vedo spesso che non ottengo bei risultati , di solito uso Dyna 6000 hs oppure Detron ppg 4081UHS la diluizione circa 15% E LAPPICAZIONE DELLE MANI E LA SEGUENTE 1 MANO MEDIA CIOÈ QUASI BAGNATA E HA SEGUIRE UNA PIENA MA NON RESTO MOLTO SODDISFATTO MI POTREBBE DARE QUALCHE DRITTA IN ATTESA DI UNA SUA RISPOSTA LA RINGRAZIO IN ANTICIPO POI TUTTI QUELLI CHE HO VISTO DICONO DIA TENERE PIU DISTANZA DAL SUPPORTO Ma in questo modo non si crea molto over spray ,la ringrazio in anticipo e continui a postare video sono molto istruttivi le auguro un buon fine settimana buona sera miscusi per i caratteri ma il mio cell da inumeri la saluto Da ITALIA buon wekeend
Hi mate just I need some clear coat good brand and fistQuick drying and inexpensive im from Sydney what you thing is good for me im working in my home and what I used is ms or HS thanks bro
paint suits might of fit me when I was a teenager
How do you deal with over spray when painting in a garage. Do you have a vent fan set up? Or just spray and do lots of polishing?
Just spray and lots of polishing for now haha. But I did get an extraction fan, that will more likely just clear the overspray than help any dust. In fact it will probably create more dust because the air will be flowing more and it's not filtered
@@TheGunmanChannel Thank you very much for the reply. I'll do my best and try and follow your great videos. Cheers.
Painters have there own way of polishing but detailers have a specific way of polishing , doesn’t mean one is wrong but whatever works for you
Painters are tradesmen. Detailers are not.
@@TheGunmanChannel detailers still sell there services so they are still tradesman , and to be honest there services are really expensive
@@M.E63 if you didn't do a certificate 3 at trade school you're not recognised as a tradesman. Sorry. It's just the truth.
Have u tried the Bigfoot Gunny???
Yeah that's no different than the Flex, it just has a larger orbit. I do love the LHR-21 Bigfoot though.
Talk to any professional detailers, and they will tell you that you don’t have to use one system for polish. In fact most of them tell you they use a vast array of polish, pads, and polishers.
Silly retailers 😜
Whoops… fat fingered that one!
USA sc