hi can i ask you how you unlocked everything in fcc? I inserted the "ham" file inside the integra and then when it connects to the caddx it unlocks it too right? but by doing this I can't go beyond 0.7km because the video signal drops to 10mbps, I'll start by saying that I also mount your same antenna on the drone, now I was wondering maybe you used a different unlocking method? Are you sure that no file needs to be inserted in the caddx? thank you if you answer me
@gianlucacioffi9719 Right, ham.cfg in goggles. Then you see only 3 channels, this mean - fcc power. Also you need to use manual channel, no auto, on 20Hz.
did you just do the ham file hack on goggles 2 sd card, or do we need the naco file on the vista as well?? i fly goggles2 with o3 and vista with liear antenna but the vista gets low mbits at 600m distance...🤔
прикольное место. в моей местности леса вперемешку с небольшими полями. у меня гдето 100-150 метров высоты было ри удалении 3 с копейками км. это 2км поля было и дальше лес начинался..
![☀ Царь цифрового FPV. Второе поколение DJI очков + Nebula Pro. Сравнение с V1. [DJI FPV Goggles V2]](http://i.ytimg.com/vi/F_vblfx1ggk/mqdefault.jpg)
![☀ Царь цифрового FPV. Второе поколение DJI очков + Nebula Pro. Сравнение с V1. [DJI FPV Goggles V2]](/img/tr.png)
This man has balls! Nice one!
May i ask you how to set up to get the LQ? Mine didnt work, just flashing 0:0 on osd, im using g2i, boxer, rx tbs nano, module tbs.
Me too..
@@Lyphfpv make sure you have the pads soldered right, tx to rx and rx to tx from receiver to FC
hi can i ask you how you unlocked everything in fcc? I inserted the "ham" file inside the integra and then when it connects to the caddx it unlocks it too right? but by doing this I can't go beyond 0.7km because the video signal drops to 10mbps, I'll start by saying that I also mount your same antenna on the drone, now I was wondering maybe you used a different unlocking method? Are you sure that no file needs to be inserted in the caddx?
thank you if you answer me
@gianlucacioffi9719
Right, ham.cfg in goggles.
Then you see only 3 channels, this mean - fcc power.
Also you need to use manual channel, no auto, on 20Hz.
did you just do the ham file hack on goggles 2 sd card, or do we need the naco file on the vista as well??
i fly goggles2 with o3 and vista with liear antenna but the vista gets low mbits at 600m distance...🤔
In case of goggles2 you need only ham.cfg
Is the cherry antenna lhcp or rhcp , need this for my system , by the way nice flight 👍
LHCP of course... thanks
@@polarfpv1860 thanks for the answer 👍
прикольное место. в моей местности леса вперемешку с небольшими полями. у меня гдето 100-150 метров высоты было ри удалении 3 с копейками км. это 2км поля было и дальше лес начинался..
@@unixoid33 ну тут я опускался чтоб поймать спутники. У земли глушение меньше
Does the nebula pro go up to its max fps on low latency mode with the goggles 2?
@@ofrisela2006 yes
Hi, can you see in your video feed goggles 2 with caddx vista a stuttering effect? Thanks
Hi, it was in 60fps mode on nebula pro camera.
I use dji camera 120fps , and no stuttering in this mode
what version of tbs firmware are you using?
@@z1dan675 6.19
Hi, how do you have osd recorded on the video. I think the only way would be to flash osd with wtfosd firmware! Is that right ?
Hi, goggles2 do not need wtfos, osd recording is on the board
rip to the LiPo
It's good, charged immediately.
2km achived long range ?
@@Superguru123 over 3km, gps blocked in our region because of war action
Thank you 😎
Hi! Did you install the wtfosd or just update the vista to have all the osd?
Hi, this is goggles2 default osd
@@polarfpv1860and you know if it's compatible con V2 goggles?
@@mikeltxi no
@@polarfpv1860 okey thank you
How to hack Vista so it can connect long range with Google2
Hi, you need to create text file ham.cfg , and put it in the goggles sd card
@@polarfpv1860i did this and didn't work. It just get lower and lower range in 20 and 10 mhz
Валик Джан, привет) А сколько у него радиус полета? далеко улетел по моему)
Привет.
Ну тут конкретно 3.2км в один конец...
А так все зависит от аккумулятора и пробития сигнала.
Нужны тесты