Grom Clone Boom exhaust upgrade

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ม.ค. 2025

ความคิดเห็น •

  • @thznofficial
    @thznofficial วันที่ผ่านมา

    Can you add a link to this exhaust

  • @Young_Manner
    @Young_Manner 19 วันที่ผ่านมา

    Where can I get the exhaust and the full kit

  • @TanManFixes
    @TanManFixes 2 ปีที่แล้ว +5

    hey guys heads up. the exhaust gaskets you will need are 30mm OD and 24mm ID. I bought some other ones made for grom but they were 40mm and will not work. so make sure you get the 30mm ones, they are "GY6" style. get 4 of them because 2 are needed and extras are always good.

    • @warrenpeas
      @warrenpeas 2 ปีที่แล้ว

      damn i did the same thing before i read this

    • @skylerlynch5098
      @skylerlynch5098 ปีที่แล้ว +2

      What about 32x24.5 how do you put them on??

    • @gunsgames2489
      @gunsgames2489 ปีที่แล้ว +1

      @@skylerlynch5098 wondering the same thing any update lmk

    • @Dr.whisper
      @Dr.whisper 9 หลายเดือนก่อน

      thats actually the wrong size gasket.. the correct gasket size is 32x24.5mm

  • @adamburgett7066
    @adamburgett7066 9 หลายเดือนก่อน

    What kind of pipe and exhaust is it

  • @adriangomez5675
    @adriangomez5675 2 ปีที่แล้ว +1

    Where and what kind of pipe is that...

  • @SheezyBabyMusic
    @SheezyBabyMusic 2 ปีที่แล้ว +1

    Looks good, broski... 👍🏾

  • @caposolomon8745
    @caposolomon8745 ปีที่แล้ว +1

    Your exhaust should not touch the frame since it gets really hot. What you should do is get a heat wrap and put it on only that part

  • @mr.diytech3591
    @mr.diytech3591 2 ปีที่แล้ว +1

    Another upgrade idea, replace the front sprocket with a 17 tooth for more top end.They can be bought for $10-$15. Those gears are short and it needs more gear for cruising so it isn't screaming on the highway. It will change the whole feel of the bike for the better.

    • @luiscovarrubias5853
      @luiscovarrubias5853 2 ปีที่แล้ว

      Do you got the amazon link also what Carburetor would you recommend

    • @HNS-007
      @HNS-007 2 ปีที่แล้ว

      it aboslutely does, i got a 17t and it works great

    • @xxLaNcExx07
      @xxLaNcExx07 2 ปีที่แล้ว

      Do you have to change anything else other than the sprocket when going to the 17t?

  • @davidcolon582
    @davidcolon582 ปีที่แล้ว

    How is it when you do the oil change? Would like to know the update.

  • @1LifeTheory
    @1LifeTheory ปีที่แล้ว

    Got a link? Also was it "too loud?"

    • @cgarcia1026
      @cgarcia1026  ปีที่แล้ว

      Check this out!

    • @cgarcia1026
      @cgarcia1026  ปีที่แล้ว +2

      #1) KEMIMOTO Motorcycle Universal Exhaust Slip
      #2) MSX Motorcycle Exhaust Muffler Middle and Front Link Pipe
      Both on Amazon

    • @cgarcia1026
      @cgarcia1026  ปีที่แล้ว +1

      I think it sounds really good. Loud but not obnoxious. Just right for me

    • @1LifeTheory
      @1LifeTheory ปีที่แล้ว

      @@cgarcia1026 nice, I just bought a grom clone and I am looking for all the mods I can get

    • @1LifeTheory
      @1LifeTheory ปีที่แล้ว

      @@cgarcia1026 Thanks

  • @yaboiarre8097
    @yaboiarre8097 2 ปีที่แล้ว

    Did your engine not heat up with that exhaust pipe touching it?

    • @cgarcia1026
      @cgarcia1026  2 ปีที่แล้ว +1

      I tweaked it just a bit so it doesn’t touch and it doesn’t get hot. You can also get heat wrap if you’re concerned. Just like they do in cars

    • @yaboiarre8097
      @yaboiarre8097 2 ปีที่แล้ว

      @@cgarcia1026 dude I’ve been heating up my exhaust it doesn’t bend for me I need some advice

  • @terrancemoody205
    @terrancemoody205 2 ปีที่แล้ว

    Nice hook up but I really don't like how the exhaust sits so close to the rear tire..just my opinion..it is a bad azz looking exhaust though!!!

  • @Gallaxyz
    @Gallaxyz 3 ปีที่แล้ว

    how to your turns feel having the exhuast mounted on the side i want a new exhuast cant find one with out being welded, but this looks really good just wanted to know?

    • @vladimpaler9274
      @vladimpaler9274 2 ปีที่แล้ว

      Check this out
      th-cam.com/video/Y-qS-y4Ok4Y/w-d-xo.html

  • @JS-CO
    @JS-CO 3 ปีที่แล้ว

    Link to exhaust?

  • @m-ng2962
    @m-ng2962 2 ปีที่แล้ว

    Make more grom videos. It seems like you het more views with the grom than car videos.

  • @josephsaucedo8691
    @josephsaucedo8691 3 ปีที่แล้ว +1

    There tons of up grade for this bike almost every thing oem grom will interchange you can get a 141cc bbk for it or swap engine to a zs190cc or 212cc direct replacement it just depends on how much you want to do to it you can make it better +upgrade then the real grom for the same price as a stock grom bike but it will smoke any stock grom for sure 👍👌✌️💯🥂🏍️

  • @SpACeCruizeR2o3
    @SpACeCruizeR2o3 3 ปีที่แล้ว

    nice vidz broski im putting a boom 250cc efi on layaway u think they worth the 2Grand price tag worse came to worse u can always replace the motor if it ever dies right?

  • @ROBSOLUTELY
    @ROBSOLUTELY 3 ปีที่แล้ว +1

    Get a REAL Grom man!

    • @cgarcia1026
      @cgarcia1026  3 ปีที่แล้ว +2

      I have one lol.

    • @bertsnotdown
      @bertsnotdown 3 ปีที่แล้ว +4

      These clones will kill a grom and it’s more fun.

    • @cgarcia1026
      @cgarcia1026  3 ปีที่แล้ว +1

      @@bertsnotdown definitely worth the money