The ULTIMATE GBA IPS Kit Comparison!
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2024
- This was way too much work for only a 16 minute video :-(
Subscribe to the 2nd channel: / @jakesimmons64
Battery Life Calculator: theengineeringmindset.com/bat...
USE CODE JAKE TO SAVE MONEY!!
V2 Kit:
RGRS: tinyurl.com/yckwa7yf
ZedLabz: tinyurl.com/bdhd4uus
Other Pre-Cut Shells (Use Code JAKE to Save!)
RGRS: tinyurl.com/bdudvaf8
ZedLabz: tinyurl.com/2hvbd55x
UV Printed Shells: tinyurl.com/eu7hun3h
Laminated V5:
RGRS (No shell): tinyurl.com/5f7zjsud
ZedLabz (No shell): tinyurl.com/5a57c75s
ZedLabz (Pre-Trimmed Shell): Coming Soon
AliExpress: s.click.aliexpress.com/e/_DBl...
Drop In V5:
RGRS: tinyurl.com/4e233mje
Zedlabz: tinyurl.com/3hp984z2
FunnyPlaying 3.0:
Mod Kit (RGRS): tinyurl.com/2yhne8df
Mod Kit (ZedLabz): tinyurl.com/bdf4ruky
Shell (RGRS): tinyurl.com/ea75ph2c
Shell (ZedLabz): tinyurl.com/yzenszyu
Cloud Game Store (CGS):
AliExpress: s.click.aliexpress.com/e/_Dkg...
My Website: retroremastered.com/
Discord: / discord
Instagram: / retroremastered
Twitter: / jakesimmonsyt
All My Other Links: linktr.ee/jakesimmons
My Tools: retroremastered.com/pages/my-...
My Favorite Mods: retroremastered.com/pages/my-...
Replacement Parts: retroremastered.com/pages/rep...
Companies and fans can send stuff here! DISCLAIMER: YOU WILL NOT GET ANYTHING BACK UNLESS PREVIOUSLY DISCUSSED! EVERYTHING WILL BE CONSIDERED AS A GIFT!
Jake Simmons
311 SW 2nd St #2502
Corvallis, OR 97333
Songs:
• Dj Quads - You're The ...
Chapters:
0:00 Intro
1:36 Compatibility
2:28 Build Quality
5:24 Installation
7:38 Screen Quality
7:57 Brightness Levels
9:19 Battery Life
11:38 Recommendations
12:52 My Perfect Mod Kit (In a Perfect World)
14:18 Conclusion - วิทยาศาสตร์และเทคโนโลยี
The best IPS kit is the friends we made along the way.
Excuse me How❓ I can find the Gameboy Advance Mod IPS V2 to buy it online.
From
Nicholas Richards
OnePiece ending is that you?
Please more videos like this! Comparing the different options for parts is really helpful and I never would’ve known about all the benefits of other kits without seeing this.
agreed!
That battery section was amazing, I wish every TH-camr went as deep as you on their topics
Thanks so much for putting this video together Jake, such a useful and comprehensive resource to have all in one place. Regarding touch pads, I've always traditionally gone the soldered route and used the select/L/R controls where possible, however I've recently been using the STEPPER step sequencing software a lot and this makes a lot of use of these three buttons and has rendered a lot of my GBAs unusable so I'm currently leaning back towards touch sensors on future builds for that reason.
I can't believe there's a laminated kit out there with a plastic lens. Absolute lunacy.
I have done two of the FP kits with their drop in shell and I must have been lucky not to have experienced any cracks. I did find it very awkward to put back together though as the screen just wants to fall out of the front when you turn it over. And aligning it so it's flush all the way round is tricky. The end result is really nice when it works though.
I'm with you on the batteries, team LADDA all the way!
Looks like Hispeedido has the best option so far with their drop in kit. Your suggestions for the "perfect" kit are spot on (aside from the lack of touch controls as mentioned before) so I hope these companies are listening!
Great work, I know how much time and effort something like this takes to put together, enjoyable as always!
I just got my 3.0 kit with its custom shell for about $43.. easy to install and had no issues when I installed it.. first time doing a GBA Mod and I’m really happy with the outcome..
Just done a HISPEEDIDO v5 laminated for a GBA. Brought a suitable shell at the same time for a stress free build. First gba screen that's really blown my socks off.
How long does your battery last with the v5
@@davidh8018 I figured it would be bad from tests I remember reading. So I put a 1500mah rechargeable USB-C pack in it. I've yet to have it run out in play (did a 6 hour road trip with it, so at least that)
why didn't you go with the v2 with better battery life?
@@saki3963 I have GBA's with both. Because I could i suppose.... The laminated V5 takes a lot of stress out of the build, and of the two imho it looks nicer. Having the usb c power mod on both the modded GBA's negates much of the using in real life battery difference anyway.
Can you describe to me what the color setting does? Does it have an option that adjusts the color to simulate the appearance of pre-SP hardware, for the sake of games made during that era? How about input latency?
Some feedback:
This video is great for comparing screens from a installation perspective, but I would like to see more details on screen quality.
* How does the colors compare (warm/cold/washed out/over saturated)?
* How does the screen handle games with flickering (for transparency)?
* Does it have ghosting?
* Does it have integer pixel scaling or not?
* How are the viewing angles?
* Feature comparison like color palettes, frame blending (to avoid flickering), screen offset etc, with a matrix comparing every screen at the end.
Otherwise, great video.
The ghosting and integer scaling are the big ones for m4
I've done multiple GBA builds now along with a couple GBCs and one DMG. This was super helpful for the me going forward with future GBA builds.
This video has been so helpful for me and let me pick out the best ips for a mod for my friend's birthday :)
Amazing content, thanks for sharing!
I have the 3.0 and, while I am happy with it overall, I have to agree with your criticisms. My touch pad does set off on its own at times, so I have to imagine it's not uncommon. I've noticed that it does not happen while I am actively using the GBA, but only when I set the device down without making any action on it. I've also been able to reproduce it easily by just stopping what I'm doing and setting the device screen up flat on my desk. I also have to state that this kit takes significantly longer to install than others on the market. Kudos to you for keeping your reviews honest and based on your experiences with the products!
Excuse me How I can find the Nintendo GameBoy Advance Mod IPS V2 to buy it online.
From
Nicholas Richards
25 Robbins Ave Elmsford New York 10523
If you have a soldering iron you can remove the chip that controls the touch pad and not have issues later
Hello Jake.
You have a great channel.
Thank you for providing great detail on installation and honest feedback.
I just did my first gba mod and your video helped me all the way.
I’m planning to do this as a hobby since I love electronics and gaming.
I had a couple of suggestions.
I used kapton tape to hold the screen to the plastic piece that you forgot to use in your other video to hold it in place while installing it to the shell. Wish I can post a picture here.
Other than that I followed your video and everything worked flawlessly.
I will continue to watch your videos.
Thank you
Great vid. Now we need one for the sp.
That is next
Yeahhh... I got the funnyplaying 3.0 kit not knowing any better and it has been a very bad experience. Exactly like what happened to you, a waywire touch sensor and cracking shell. This video was super helpful and now I know which kit to go with in the future
Great video, Jake! I have the FunnyPlaying 3.0 Kit. I really like that you have full access to the OSD without any soldering. I know soldering isn’t that difficult but I didn’t want to buy a soldering iron just for that. And also there‘s a risk of pinching the wires. So I skipped the soldering. The installation wasn’t that difficult. The bracket was a little bit annoying but doable. Overall I‘m pleased with that kit.
My FunnyPlaying kit is arriving soon, and him mentioning the quality of the case is giving me minor anxiety.
@@Vei0102how was it?
@TwoFvceJ honestly is not as bad as I thought the plastic feels fine much better than the cheap ebay shell I had on it. I'm satisfied with the quality, and the display was easy to install.
I use a cloud drop-in, and it fits in an oem shell. It had the same issue with the screen not being lined up right. If I do another mod with that screen, I can get it lined up better. Also it isn't laminated so I was able to get a glass lens!
This is a great video. Thank you!
Ahh so now I know why the ribbon tore when installing my IPS on my GBA. It was FunnyPlaying lol. This is super informative Jake! Thanks dude!
Jake thanks for the helpful video! I just subbed❤
Is there a kit you recommend for restoring gameboys for resell? The one you were going to use for your videos seemed like the best
You tell it how it is man, thanks ! Went with v2 with clean juice battery mod
I'd love to see lag tests for these different screens. See just how much worse or possibly better these might be compared to the default screen for button responsiveness.
Awesome comparison, thank you. The CGS kit tested was the new one with the 720x480 screen?
Literally just ordered a GBA to mod today… perfect timing
Been looking forward to this one. Thanks for putting it together! Now I just gotta' decide between IPS and ITA...
Just curious, why'd you choose the V2 over the Drop-In?
has longer battery life and is brighter
Great video Jake!
If i had to choose this would be the perfect guide to choose from.
I bought a GBA with an v5 laminated IPS display on ebay for 82€ two weeks ago, because the seller fcked up the installation by breaking off some 0402 capacitors on the gba pcb and ripping off two solder pads on the IPS PCB (SEL and R IIRC).. But nothing you can't fix with a hot air station for 25€, some flux and spare capacitors^^.
Before that i had a v2 IPS GBA which i got from ebay as a non functioning bundle too. That kit was already nice and all, but i hated that i only had one touch button for brightness and the screen filters combined (short and long presses).. I accidentaly changed the screen filter so many times by just showing my brother something.. (the touch pad didn't come with a long wire, but rather a 1cm flex cable pad, which came directly off the display ribbon)
With the v5 i have the OSD + SEL L/R controls, which are just perfect imho. v5 any day baby!
Currently i'm thinking about getting a lipo usb-c kit, but i'm not quite sure which one yet.. I really want the "play while charging" feature..
Awesome video! Thank you!
I wanna do wat y’all do Im gonna watch ur videos jake learn as much I can!!!!!
Thanks for the vid. I sit in the train a lot to and from work and wanna mod a Gba. Think I'll go for the v5 kit since playing in the train is a lot like playing outdoors I guess.
Also, thanks again for the Gamecube pico mod video, i modded mine a while ago and it runs great!! So happy with my modded GameCube ❤️
may i ask why didn't go with the v2 with better battery life?
I got the funny playing v3 kit and I love it not had any problem with the touch sensor yet ...... also I like that it was glass screen lens
Great Video! Very entertaining and informative. I think I'll get a V5 😂
May i ask why you aren't going for the v2 with longer battey life?
I have the V5 not laminat and I'm happy with it beside of the Touch control.
may i ask why didn't go with the v2 with better battery life?
Kind of have to agree with the 3.0 kit got a faulty cable but they did have great customer service and I didnt have the sensor update
Amazing!
Exactement la vidéo que je cherchais, merci. Beau travail. +1
The lack of integer scaling and thus pixel accuracy is the biggest downside to the FunnyPlaying kit in my mind, even though your great points on the shell nonsense (and touch sensors) are spot-on.
The more "pixelated" a game is, the more you can notice the effects but it just makes the whole image have an "artificial" or even emulator vibe in my head, regardless of the filter effects you use or don't use.
What I also find crazy about the FunnyPlaying touch sensors is just how bad they are (and this happens on GBC too). I haven't had any issues with false triggers or strange interactions on any of the Highspeedido touch sensors when everything is buttoned up properly, but all I have to do is put certain games in and it guarantees that my Funnyplaying screens become haunted with false touches.
Really appreciate the vid. A lot of great information. However, it's quite obvious you don't care all that much about picture quality. You gave a handful of seconds to say they are all the same, but I myself, and I think a lot of people, care a ton about the look of the screen. For one, which of these screens have perfect integer scaling? Do they have any filters? How do they look? How close are they to the AGS and SP screens? What about the aliasing? The very low ppi on the gba screen and large pixels meant it had a very distinct look to it and a lot of the art was designed pixel by pixel for that resolution. Since the pixels are very visible to the naked eye, without perfect integer scaling you're sometimes going to get a fuzzy or aliased picture which might produce some strange effects and looks compared to the original. This is particularly true with lower res screens. I for one don't like screens which don't have perfect integer scaling and relatively square pixels to recreate the look of the gba image accurately. Incidentally, this is also probably why most screens don't have horizontal tilt correction. It would make the image look really bad.
That's why I picked the hispeedido v5. Perfect integer scaling means an exact 3x3 block of pixels represents one gba pixel. It also has a filter that uses 2x2 pixel blocks (and turns off the others) to recreate gridlines similar the original pixel grid lines on the AGS. It's not perfect, but it does a good job. Would love to have this info in your future vids.
I considered other screens as well, but couldn't find any that used perfect integer scaling except the funny playing ITA kit. They claim it has the feature, even though the actual screen is a bit bigger (maybe they use firmware to only use the right number of pixels?). However, the pixels on that kit are longer vertically and look more rectangular. I bought one to install, but still havent gotten a gba for it yet so I haven't seen it work in person.
I have no idea how good/bad the ips kits funnyplaying are offering are since I don't have personal experience with them. I did however install their ITA(DSi lower screen) in my original gba, and it has worked great for about 7 months now. The install was pretty easy aswell. Only needed to trim the shell a bit and decided to cut the touchpad and just solder everything to avoid any future problems.
Great video 🙂
A GBA SP with (One chip) Hispeedido V5 with about 8/9 on the brightness with the pixel grid option turned on - is number 1 at the moment nothing comes close in my opinion 😊
I have tried them all and even then lesser known ones and even some prototype screens.
A nice higher 720x480 resolution compared to the others ✓
9 pixels to 1 pixel ✓
x3 integer scaling ✓
With a FunnyPlaying MaxPlay Battery that they made in partnership with Makho or a Helder Game Tech MegaBat ✓
On my original GBA I have a Funnyplaying ITA screen it's my 2nd favourite.
The original AGS-101 screen is 3rd tied with the one they call the Funnyplaying 3.0 (inch) IPS screen.
Unlike others i didn't like the Funnyplaying V2 (9380) screens. Personally i don't like playing GBA games without having a grid, it makes all the difference to me.
Yeah I forgot to touch on the pixel grid stuff because I don’t ever use it😅 but I understand there are some folks out there who do
@@JakeSimmons It's all good 😄 it's a subjective thing I have many friends who don't like it either. Your video was great because you talked about how easy (or not) they are to install & all the issues one may encounter.
I'm about to upgrade my ancient cgs laminate sp kit to the v5 kit, pretty excited, I have the laminate ITA kit in my gba too, I don't care about pixel grid personally but it doesn't bother me. I like the color temperature and the lack of other common issues in IPS kits that the ITA kit solves
im torn, the v2 has 3 hours more battery time which is huge. but the v5 is easier to install for a beginner, and the screen is better
I bought a funnyplaying IPS v2 drop in (no solder) kit in 2021 and it stopped working 2 years later. It seemed like the shell was pinching the innards... I had to really tighten the screws to make the shell pieces flush. I don't know what happened but I don't want to keep buying a new screen kit every 2 years. Ill just get an SP. I don't know if I feel confident that there is a screen replacement that will last "forever".
I also dont need all those menus and chroma options... I just want the screen to be lit. What mod kit with no soldering?
The only thing I can take away from this video is that it only convinced me that I've made the right choice by getting the V2 kit!!!! Great vid Jake, very informative! 🔥
may i ask why you didn't go with the v5 with easier install
@@saki3963I got the V2 kit when it was the latest mod to come out at that time. After a year or so then the V5 came out, to tell you honestly I kinda wish the V2 is as easy of a drop-in install like the V5.
@@TheGentleCreepersdid you have trouble installing the v2? im really considering that one because of the extra battery life
@@saki3963 oh yeah, now that you've mentioned the battery life from what I've experienced. I have rechargeable double-a batteries with 1200 mah capacity each. and I set my brightness to 2nd from the lowest brightness. The battery lasts from 8-10 hours. It's very great. As for the difficulties I had installing it, the brightness controls needed to be soldered to the ribbon cable. My kit included some thin gauge wires but unfortunately those are short so I ended up ripping the solder pads from my ribbon cable. So I bought another ribbon cable and bought 30 AWG (american gauge wire) I cannot stress that enough. Cut the wires at least 5-6 inches so you can have some needed space when installing. Also that is the first time I've ever done soldering. If you have a friend or know someone who has experience soldering electronics just hire their service. It's much easier that way. But if you want it to do it yourself. Invest in a good soldering iron, flux and solder lead. It'll make the soldering experience faster and easier.
Update me if you've done the installation. Enjoy!
@@saki3963sorry for the late reply. Honestly it was not that hard but considering it was my first soldering experience it was quite challenging for me even though I needed to solder 6 pads in total. But if you know someone who's great at soldering it'll be an easy thing for them.
Is the FRM feature available on the drop-in v5 or is it only on the laminated v5 and 3.0 FunnyPlaying? I saw previously FRM wasn't on the drop-in v5 until the laminated v5 came out, so wasn't sure if they updated the drop-in v5 to have FRM.
I want to do a Boxypixel GBA mod - what IPS kit do you recommend I use?
What case do you prefer
“which mod kit should i get?”
all of them at the same time
Can we fund this mans perfect GBA kit asap?
I have two GBA motherboards and was about to buy a shell, buttons and a drop-in IPS from funnyplaying. Seing the shell quality I'm not sure anymore...
Which one should I buy now? I just need a high quality shell and an easy to install drop-in IPS kit... 🥺
I want to be sure that the shell fits perfectly with the screen.
Do any other kits have the "true gba colours" that the retrosix cleanscreen suposedly does?
(It suposly asl has a dmg colour mode too that sounds cool)
I feel its a nessesary feature but i hant seen anyone compare them yet.
I bought the V2 a while back and absolutely love it. Although my GBA does need a new speaker...
may i ask why you didn't go with the v5?
@@saki3963 i dont think the V5 was available 3 years ago
What are the main differences between the V2 and V5? I’m not sure I’m following.
Thanks!
Great in-depth review! Could you do a similar comparison using the RetroSix GBA screen? I've bought one to install but would love to see how it stacks up to the others.
I won’t cover anything from that company because of the things they’ve done, but I will say their mod kits are not good. From what I’ve seen, the power draw is very high and from experience, I dislike their “prestige” shells
@@JakeSimmons NGL, I've heard that before but started buying their parts before I heard the rumours. I'd happily reply indepth with my good and bad experiences of the other GBA and GBASP mods I've tried, and why I prefer their parts over Funnyplaying. I respect the fact my experience is dwarfed by yours so happy to compare experiences. Maybe a TH-cam thread isn't the best place though...
@@JakeSimmons I will say that their dehum dehiss kit does remove both. But an IPS mod adds some hum back. So still worth while, until someone can show me something better.
Retrosix is a scumbag, thieve and backstabber. Also his products are garbage and rip offs of originals.
@@swingstylezhi Luke,
Nice to see you have multiple accounts
Do these backlight mods cause games to trace along the screen or stay on the screen or impact the game play at all?
Hello! Nice video mate. I recently found you (now subscribed). But one thing...aesthetics... Since all kits come laminated and glued to the lenses... I prefer the original lens so that's very important for me. And that's why i decide to buy CGS. It's the most similar to the original. I prefered maybe another screen option but for me the lens is a important thing for aesthetics. For example, HISPEEDIDO lenses for GBA SP are with very bad logo for GBA. And well the rest of them are with that silver logo that i doesn't like very much...
Anyone have any thoughts on the CleanScreen from retrosix? I installed their Game Gear screen and love it! Was wondering if I should do their GBA screen.
The best ips kit for me would be the drop in, I wouldn’t want to sacrifice an oem shell personally plus trimming just doesn’t sound fun🤷♂️
Any news on changes for the V5 kit battery life?
Went with Hispeedido laminated in my two GBA systems. Great screens, one minor hiccup (my fault), but overall impressed. I do NOT recommend shells from Ali though… My opinion..
I don’t think you talked about the frame blending feature. it’s incredibly useful for games that try to render shadows, as the devs for old games flashed a sprite on and off with the garbage original gba screen it worked. But with ips screens it flashes, which flame blending fixes and makes the shadow look transparent.
Yeah I forgot to mention that because I always forget about it😅 it’s a set it and forget it thing for me and I don’t think I play any games that actually need it. It’s a great feature though!
Yes, exactly my thoughts! Frame blending is a must have on IPS kits. I think the drop-in V5 does not have it? Makes it less of a recommendation to me :(
@@Anthestudios yeah, only the laminated highspeedido and funnyplaying kits have it
Where can i get v5 shells? I dont want to do trimming and the aliexpress ones are plain.
Is there a website that sells the Pokémon shells ?
Hello , just recently got into your videos as I am trying to make my own GBA w an original shell. The only issue is finding working motherboard parts, do you have any advice for finding these?
I have a listed of recommendations for tools, parts, and mod kits on my website! I’m gonna be adding more to the lists soon since it’s been a while but the parts list is pretty good
I just want to know whose bright idea was it to start putting touch sensors on GBAs to begin with
When using a modded GBA do you have any recommendations on rechargeable AA batteries? And does it matter if it’s 1.2v or 1.5v for the output?
I prefer the LADDAs from ikea. Nimh batteries will be 1.2v and lithium AAs will be 1.5v. Both will work
Personally I ordered these:
Hixon Rechargeable 1.5 V AA Lithium Battery, 3500 mWh
I bought them from a local gaming shop that uses them in VR sets. You can find them online everywhere I guess. They make my GBA with IPS last 10-11 hours max. Bought 2 packs of 4 so good investment.
Are any you don’t have to solder for brightness to work?
Can V5 screen fit in a 3.0 laminated shell?
Quick question. You mention that the hispeedido requires a special shell. Are you talking about the ips ready shells?
This should hopefully answer your questions
th-cam.com/video/45FQSGMl-Lc/w-d-xo.html
What screen is closest to the original size? I like the custom/repro screen lenses but they are always OEM size (too small of a bezel for my IPS kit)
The drop in v5 will fit like an oem screen
Hi! Jake what cleaner do u use to clean GBA SP's PCB?
99% isopropyl alcohol but don’t spray it on the buttons directly
So on your experience recomend th V2? And stay away for eveything that is funnyplaying?
Very Good side by side, I am leaning more and more away from funnyplaying. Thank you !
I got the funnyplaying 3.0 laminated kit and it looks gorgeous. Sadly, the d-pad is not great, despite me having done quite a bit of troubleshooting already. Cleaning, screwing tighter, looser, original button, original membrane, 'new' membrane and buttons.
Have you tried a fiberglass pen on the contacts on the board? That’s my go to for bad buttons
@@JakeSimmons I did some more testing and the issue seems to be a bit different than I initially described.
What seems to be happening is that when the membrane is pressed in (when it feels like it clicks) the conductive part actually needs to be pressed a bit further to make enough contact with the pad on the motherboard. This makes it so 'softer' presses aren't registered consistently, or registered at all. You'd have to press quite hard and after playing for an hour, I found my left arm/hand actually hurt from the extra force I had to use.
I am using the original membrane so I am not sure what else could work. Super grateful for the initial reply but if you've got advice for me now that there's a bit more info on the issue, I'd really appreciate your input!
@@JakeSimmons I've found the culprit. The FunnyPlaying shell, the front bit, seems to have a defective screwpost. This makes it so there's not enough pressure on the membranes and makes the connection shoddy. I've sent an email for a replacement and I am fairly certain that will fix the issue!
how did it end? :) @@StefanPiano
@@A_d_e_k Well, it hasn't ended yet. I had to pay the shipping cost myself and thought I'd combine it with a little speaker module but they forgot to send the replacement shell with it so I am still waiting for my parcel to come hah.
My hispeedido v5 I bought on AliExpress from the hispeedido store says laminated but also says drop in so I have no idea what I’ve purchased 😂
I usually build 1 of each, for Example I own the following;
GBC: GBA: GBA SP:
OG V2 FP OG V2 HSP OG V2 IPS
OG V2 HSP OG ITA FP OG V2 HSP
IPS Q5 V3 IPS FP ITA SP KIT
2 x Amoled AGS-101 Mod V3 IPS FP
All this being said, I pretty much like them all. My favorites being AMOLED for GB and for GBA/GBA SP my favorite being IPS V3 or yes even ITA (The colors are less saturated and come closer to original AGS-101 which for some games like Golden sun, are very good rendering, love the battery life of both V3 and ITA and the features).
Where did you get that PDX carpet shell?
I had it made custom at a local print shop
So if I want to uprgade my OG indigo GBA without changing the shell the drop in V5 is the way to go ?
Yup!
Is there just an option to keep the original screen and drop in a backlight like on the dmg?
There’s a frontlight option but it’s not great
I have a FunnyPlaying IPS v2 which broke, and I bought the shell for that version, would a v5 fit in without trimming?
It would not. You would need to trim it
I always thought funny playing has the best shells, their gbc shell is very good and their older ips ready shell for gba is super sturdy, I still use it.
I'll get myself a Laminated V5 with shell and compare that I guess.
And also a laminated ITA is on my list, I'll see if I have problems with the shell.
Funnyplaying typically has great shells. I just can’t stand the laminated design they went for
@@JakeSimmonsI still have my old IPS V2 FP shell and now have a laminate shell since I changed over to an ITA kit. The quality even in just the texturing is so much worse on the laminate shells, they didn't just change the screen cutout. They made everything significantly cheaper and worse with laminate ready shells
May i ask why you aren't going for the v2 with longer battery life?
I'm new to this stuff and I STILL dont know what I want. I'm not gonna be playing in the sun, or in a pitchblack room, but also need easty installation with no soldering and a battery life to last the day.
Quick question, I found my gba-001 but it is a midnight blue Toys R US edition in great shape. Is this too rare to mod? I'm just now discovering that we can update these things.
It’s up to you! A lot of people would say you shouldn’t but do what you want! If I were gonna actually play it, I’d mod it. But if it’s gonna sit in a glass case, I’d leave it. You do you though
What-the?... How did it come to this. First I hear about an IPS screen years ago, then a V2 which I assume rids of the V1's orange hue. And now it's a whole thing where you have 5 different iterations of IPS screens. What's next? 720x480 OLED screens? The Switch uses OLEDs. Though that isn't very wise. I understand why companies are just throwing OLEDs into their legally distinct Steam Decks. OLEDs wear out, we should be using QLEDs for durability.
the gameboy color recently got an amoled mod so it’s probably heading that way
@@eeveeblazelol Isn't OLED a bad idea long term?
This guy hates 3.0
Wait so you just made a video a couple back saying the v5 was the best, so are you saying the 2.0 is now the best?
the only thing about the v2 that beats the v5 is the 3 hour longer battery life and its brighter
My IPS kit looks beautiful but the screen freezes every few hours so it's unusable ☹️
Huh, I've done all of these kits and actually liked the funnyplaying one the most. Having the screen insert from the back and the bracket made it all feel really secure. Didn't have to rely on adhesive that may fail at some point. I've never had any issues with the touch pad, are you securing it to the shell at all? I always tape it down to the shell/lens, or just cut it off and insulate with kapton tape since I don't really like touch sensors. Also never had any cracking issues.
The need for a custom shell is the only real downside for me with the FP kit, but really most people are getting new shells anyways when doing a screen upgrade.
That cloud gaming store kit is trash though. I've actually been disappointed with every kit I've tried from them for various handhelds.
Excuse me How❓ I can find the Nintendo GameBoy Advance Mod IPS V2 to buy it online.
From Nicholas Richards
Please please pleeeeease do IPS for GBC!
i want to get an ips screen but i want to put on a different screen lens is that possible
If you go with a IPS kit that isn’t laminated
@@JakeSimmons thank you 👍
Hello. This Cloud Game Store laminated screen is compatible with the original GBA shell?
Not without trimming the shell first. Otherwise yes
@@JakeSimmons Thank you!
Hey Jake, great video. I have two of the 3.0. Whenever I solder the L R and SELECT wires onto the flex ribbon, the select button stops working. I desolder select from the ribbon and select works again. I’ve done this like 5 times and even tried using my own wires. I’ve cleaned the contacts. Checked continuity through the test points all the way to pin 126 on the cpu. Everything seems ok on the mobo and I haven’t found any shorts. Do you think this is a funny playing flex cable issue or something I’m missing I should check on the gba motherboard (ags101). I’m still learning and have three gbas I’m building that all have their quirks lol.
Also the damn touch sensor isn’t working now! Argh. Out of both 3.0 kits neither is working perfectly overall. The other kit has lines in the screen from manufacturing defect.
Also, do you have a list of replacement parts you buy posted somewhere?
Cheers!
As someone who likes most of funnyplayings stuff. The 3.0 laminated kit is kinda rough
I've watched the video the whole way through. But I'm still stuck on whether to go with the V2 or the V5. The V2 has better battery, but the V5 looks slightly better. I'm not sure.
If it helps, I think they look about the same color wise
@JakeSimmons if I recall. The V2 does not have frame blending, but the V5 does correct? Remind me what frame blending does again?
@@gabrielreisinger8047 correct. It blends frames together to simulate to poor response times of the original screens. It’s only nice for a few games and even then it’s not horrible without it for those few games that could use it
I think I'm going to go with the V2. It's not that much cheaper. But the better battery life and the brighter screen make it a bit better.
Poll?
Me like. Me not use brain.
Tilt adjustment would seriously degrade the image quality
What about the price of each kit
Check the links in the description. They’re all about the same price so I don’t really mention it
@@JakeSimmons i went with one from cloud shop on ali since i live in Iceland. All others had 25$+ shipping while cloud offered free shipping. Thankfully cloud shop has a newer model ips kit that don't require a power wire. :)
Sir can i order to you full mod gba i'm from.philippines
I don’t see why you couldn’t. All shipping and import costs are covered by the customer though
What does IPS mean?
It’s the type of screen. The best type of LCD display
Still picking funny playing ironically. As someone that did do a build with funny playing recently with both sp and og gba i still find the installation easy and okay. Yeah the internal cut build quality is lower the outside texture is nice and not slippery (hate gloss shells). After watching the video full compared to other ips screens the crooked or ridiculous power draw leads me away and back to funny playing middle of the pack in all around deficiencies. Ps thank you for your awesome videos you got me into this funny hobby of retro modding 😊
Ive also used there speaker and usbc mod kits and they do the just just fine enought
Yep, I've done tons of gameboy upgrades across various consoles and funnyplaying has consistently been the highest quality. Hispeedido is also good for the price (less than funnyplaying), but not as high quality. All the cloud game store stuff I've tried has not been great.
8 hours is still a great battery life regardless of device. These modded GBA's rival modern smartphones. Yet again, GBA's don't have cellular connectivity or much other functionality other than running whatever is in the cartridge slot. It's a shame that collecting for basically any retro system can be very expensive, especially from Nintendo. I know, supply and demand, but it's getting ridiculous. No reason it should cost less money to do the NSO Expansion Pack family plan than it is to buy Minish Cap or Metroid Fusion physically. And that's just loose pricing.
The discount code does not work :(
Code JAKE works at RGRS, Zedlabz, and Retro Modding
tried at Zedlabz but did not work. is it that maybe its only for US or NA?@@JakeSimmons
The code did not work but I bought the screen and the shell thanks to your recommendations. Hope it helped your channel. Please keep up the great work!