Bringus I dont know if you'll read this but.. For the last year I've had severe depression. One of the things that genuinely toke my mind off things were your videos. I just wanna say whether you read this or not..thank you
Make sure to take some time to think about things, i’m currently feeling what your feeling, your not alone. TH-cam is a good distraction, just make sure it doesn’t stop you from what you want to do.
Little tip about bridging solder joints, DONT use flux. The entire purpose of flux is to keep solder sticking to its pad, and its pad alone. so in this case, using flux only makes your life harder.
@@BringusStudios I also recommend trying to tack the solder instead of feeding it, i.e. putting a glob of solder onto your iron and then setting it down onto the pads. This would also help by burning away any flux core your solder wire might have.
Back in the day I would use a fibreglass pencil to clean the TSOP points and then use a pencil to draw between the 2 points so flash would be enabled, no solder required. Then it was time to install a linux loader via a mechassault gamesave and then flash via terminal on my PC over network! Was involved in the scene for almost 5 years and during that time must of modified 2 dozen xboxs. In future should you do it again a 1.6 xbox can be used, it just needs a 1.6 compatible chip with adapter. I learnt a lot watching this, so thank you! Also releasing the 3D files/guide is a top tier move. Thank you for all the wonderful content!.
@@Krustable Exactly my dude. I don't wanna hear a pleasing 48kHz jingle anymore. I wanna hear clicking, hard drives, and a PC beeper. GIVE ME BACK MY INDUSTRIAL MACHINES
Idk I’d rather actually use the case than have it complete and unusable because of being stupidly outdated but throwing the rest of it away is a bit far. At the end of the day, they own it and can do whatever they want with it
He kept the parts but refused to sell them, and the hard drive was 20gb and he didn’t see any files on the drive at all, but there could have been deleted files on it.
The xbox one and ps4 use cut down, low power cosumption bulldozer cores that were designed for notbookes and embedded computers. Now imagine if they used full-fledged bulldozer cores like the fx-8350. The performance increases (and increased power consumption) would have been insane!
The editing, the technicalities, the knowledge, the memes, the older and smarter but also 6 inch taller brother energy, all in one perfectly crafted cinematic experience just for us to enjoy. Thank you, smart internet man!
In regards to the mini Xbox project, there is an ATX standard called FlexATX that has smol power supplies, might be something to look into. Often used for old PowerPC Mac towers.
when i heard "can you feel the sunshine?" almost at the end of the video, i understood the kind of soul behind the technical skills. wonderful job, dude.
I'll be honest. I suck at most of the things you've done today... HOWEVER... I'm tempted now to fit my own OG Xbox into a small form factor dell optiplex case.
It was originally called the DirectX Box, but after the people at microsoft were saying 'directx box' over and over every day, people naturally just shortened it to 'the xbox' when talking about it. DirectX is a 3d rendering api made for windows, so it's no surprise most of the consoles are x86. That is completely expected in fact. Only the PowerPC xbox 360 is the outlier.
I mean... the original Xbox is practically a PC as off-the-shelf as a console could possibly be. A standard Intel Pentium 3 mobile CPU and Nvidia GPU, standard HDD, heck it's even running a build of Windows 2000! (albeit with custom kernel modifications to replace the Windowed desktop and add some additional APIs) Iirc the controller ports are also just funny shaped USB ports, which is how the remote adapter enabled additional playback functionality.
@@Chickenbreadlp yeah an xbox already runs windows under the hood at its core but with a custom user interface and components. It even has the edge browser
I know it was SUPER fast, but I picked up on the Brody-quest reference. You have no idea how happy that made me and how glad I am to be subscribed to you. The way I screamed and pointed it out to my husband.
This is the 4th video what I'm watching from Bringus Studios and I never was a "hardware guy" but I'm absolutley love your videos ! Your style, the editing it's just more then perfect ! Plese never stop to doing thes videos !! Absolutley best channel on YT !
I was a beta tester for the Xbox and I can confirm that these were used. However, they kept them under a sheet when we used them and they rarely had side panels installed.
Hi Bringus I found your channel yesterday like mid night and I was suppose to study for my DSA exam but I liked your videos to much i went like till 5 in the morning watching your videos and FKED my exam but anything for this channel. Great Work keep it up.
Oh god, that microsoldering to flash the BIOS brings me back to having to solder jumper wires onto 2 pins even closer together to get serial and hack a board.
that'll be giving them too much credit, im convinced that they dont even take apart some of their "refurbished" consoles for clearing out dust and other debris much less do any actual repairs on the hardware
I would highly recommend picking up a chisel tip for your iron. That narrow conical tip doesn't present very much contact surface area at all and is making things much more difficult for you!
I think it would be cool to get the original innards and make a custom case that makes it look like one of those 2012 "xbox 720" wacky cases. Maybe even the classic concept case that was just a huge stainless steel X
Being near an e-waste store must be like a kid in a candy shop for nerds like you Bringus. If I tried to mod a console I would find a way to frag grenade myself and get my foot stuck in the microwave but that'd be a cool place to look through I feel.
i was wondering what you could do with a video about the Alpha I, and oh my god you banged it out of the park such a sick build; i love that you tried to include the 2000s PC hobbyist aesthetic into it
That was SUCH a good video. When I saw it in my notifications, due to the title, I feared that nothing much would be added to the LTT video but the fact that you basically entirely modded an actual xbox into an empty case was so fun to watch. It is also incredibly motivating for my own dumb projects. (Photogrametry seems to have a lot of potential too) (Ps. Excuse my english, i have a terrible headache)
Photogrammetry is truly a love/hate relationship, lol I personally use Meshroom for photo based photogrammetry, since the node system lets you do some extra stuff, and Polycam on my iPhone for LiDAR based photogrammetry of larger spaces.
What exactly is good about this video? Someone made a redneck Xbox mod o.O abysmal camera work, super annoying voice. Jesus, I wish YT wouldn't put shite like this in my timeline.
This project is the ultimate unholy synthesis of jank and perfectionism. I don't know how you made it work, Bringus, but you're a legend. I salute you, sir
The idea of a xbox tower is just so cool! I've seen water cooled xbox mods, and that would likelly mitigate the cooling issues as well if you where to join the concepts!
I found out about you last night and I've been half listening/ half watching your videos while I work for at least 8 hours. I own a 3D printing business and tinker with other tech myself, so I freaking love your content. Perfect blend between meme/ shitposting and genuine limit-pushing innovation. You're a legend, keep doing awesome shit.
anyone else watch videos like these and not understand what's being talked about 95% of the time but still absolutely enjoying them ?? lmao , i feel like a kid watching their dad repair something and not understanding what's happening but still being proud
This has to be one of the best videos youve made up there, for me, with the google meet and ps2 mod videos. Always enjoyable and incredibly entertaining, thank you Bringboy
A truly beautiful build. This reminded me that I need to get my Xbox out of storage and replace all the capacitors due to them starting to go out. I also didn't know about the Electron Xbox HDMI adapter, and now I'm definitely going to grab one!
I've got a 20-year-old keyboard I found in a dumpster with a massive coffee stain on it and a bent PS/2 pin. After a clean-up, it functions perfectly. Old keyboards are resilient.
Retro hardware collector/enthusiast here! I somehow had no idea these existed, but I realised from watching the video that I have most of the components to build one of these (other than the chassis and proprietary things like the sound card) sitting in my storage cupboard. I also use original Xbox 8GB hard drives in retro builds, because they are cheaper and younger than other sub 10GB IDE drives so the capacity is period correct, and they have less chance of immediate death. I actually have a whole box of them for that purpose. Nice video, very interesting, it has given me several ideas!
0:30 one of the facts that made i like xbox 360 so much, is that the first XDKs before partnernet and DevKits in 360 Format was Literally the Power Mac G5 with an xbox logo in the front
This was an amazing conversion/ restomod my friend! I love it! I found your channel outta the blue while sleep deprived af so this has been a journey 😂
Your comedic timing is SO ON POINT! I LOVE IT! Just started watching your videos. I'm on a "Old pc" kick for the time being. Love what i've seen so far!
THANK YOU FOR MAKING ALL OF THE PARTS AVAILABLE!!! You're a god among insects. I have a Xbox OG that's got a soft modded HDD and it's just collecting dust. Now I know what I'm doing with it.
You guys misunderstood me. I'm not the guy who dephiled the sacred alpha kit. I'm the guy with the clear and green development units pictured right before. 😅
I’ve been watching since you had 9000 subs… crazy how you’ve developed as a channel. Your video quality has drastically improved, and I think that the format of the videos now are amazing to me. Keep it up :)
Except for nintendo where the console's selling point is less related to hardware than games. I would say if nintendo sold an actual case priced the same as 2016 gaming pceven with the same specs people would still be buying it in bulk.
"I did a tech project on something I could only find 3 existing copies of. I'll release all the documentation in case you want to follow along at home!"
Download Opera for FREE to keep your browsing both fun, and organized: opr.as/01-Opera-browser-bringus-studios
chinese spyware
hello bringus studios on youtube
I don’t like opera
no
chinese spyware
Putting not only your project files but an entire document with instructions on how to do this mod is unfathomably based holy shit
Nintendo is his main computer, Opera Docs !
and for free I out loud was shocked about that, if I ever use that I'm def donating to him for it ain't no way that should be free lolol
hehe funny bloc game man
did he run gentoox when all was said and done
People need to stop gatekeeping and bringus shows his support for others to build cool things with his ideas
Bringus I dont know if you'll read this but.. For the last year I've had severe depression. One of the things that genuinely toke my mind off things were your videos. I just wanna say whether you read this or not..thank you
Make sure to take some time to think about things, i’m currently feeling what your feeling, your not alone. TH-cam is a good distraction, just make sure it doesn’t stop you from what you want to do.
@@chro. thank you for your kind advice. I've been feeling a lot better Now
@@Blin240 Don’t
@@Blin240 thank you very much for the shit advice. But I'd rather not end the life that I've spent 23 Years on. My cat wouldn't appreciate it
@Blin240 if it's so manly then maybe you should do it
Little tip about bridging solder joints, DONT use flux.
The entire purpose of flux is to keep solder sticking to its pad, and its pad alone.
so in this case, using flux only makes your life harder.
bruh crazy that I didn't put two and two together as to why it wasn't bridging very well until reading your comment just now
Bruh I also have been doing it wrong
@@BringusStudios I also recommend trying to tack the solder instead of feeding it, i.e. putting a glob of solder onto your iron and then setting it down onto the pads. This would also help by burning away any flux core your solder wire might have.
This comment just changed my life
@@Crawfishness This will help me build lazy perf board projects, thank you!
Back in the day I would use a fibreglass pencil to clean the TSOP points and then use a pencil to draw between the 2 points so flash would be enabled, no solder required. Then it was time to install a linux loader via a mechassault gamesave and then flash via terminal on my PC over network! Was involved in the scene for almost 5 years and during that time must of modified 2 dozen xboxs. In future should you do it again a 1.6 xbox can be used, it just needs a 1.6 compatible chip with adapter. I learnt a lot watching this, so thank you! Also releasing the 3D files/guide is a top tier move. Thank you for all the wonderful content!.
That orange xbox case is appearing in my dreams now
headcrap
@@Doot_doot_skeleton rrraaaaeegggaggh!! - headcrab
Pick up that can
This was posted right as my noodles were done
Thank u Bringus for enhancing my meal
Were the noodles good?
you eat noodles at 9:00 (time zones don’t exist)
@@TheBoip *(time zones exist)
@@TheBoip every time is a good noodle time
@@TheBoipyou can eat any food at any time
God that 2000s PC boot-up sound healed me a little.
I ascended when I heard it
sounded like what it should back then, a goddamn MACHINE
@@Krustable Exactly my dude. I don't wanna hear a pleasing 48kHz jingle anymore. I wanna hear clicking, hard drives, and a PC beeper.
GIVE ME BACK MY INDUSTRIAL MACHINES
@@IneptOrange YYYAAAAAAAAAAAHHH!!
Right?? Fuck I love that sound so much and it’s so universal to that time period computers
I can't believe that guy threw out all the guts.
Idk I’d rather actually use the case than have it complete and unusable because of being stupidly outdated but throwing the rest of it away is a bit far. At the end of the day, they own it and can do whatever they want with it
Honestly I thought it was a pretty cool idea to put new hardware in it and give it a new life, but ye throwing away the guys was pretty bad
@@ThisWillCharacter Some of us find uses for old hardware, as there is still a lot of *old* software that won't work on modern systems.
He kept the parts but refused to sell them, and the hard drive was 20gb and he didn’t see any files on the drive at all, but there could have been deleted files on it.
Reddit is full of idiots. Not surprised.
The xbox one and ps4 use cut down, low power cosumption bulldozer cores that were designed for notbookes and embedded computers. Now imagine if they used full-fledged bulldozer cores like the fx-8350. The performance increases (and increased power consumption) would have been insane!
This is genuinely one of the coolest things I have seen on youtube. Keep up the good work!
I need a Bringus Studios and Dankpods collab
Reasons:
1: Connection with a word that ends with -ingus
2. funny tech internet man
This would be the ultimate mash up, and I already need it to happen
but they did that kinda
@@oven8337 How?
YES
@@M4ximumCheese On the second channel he went to LTX and met Dank pods.
Glad I was able to help you create this rad Xbox! :)
Big W
awesome dude!
did you save the parts of the xbox computer or did you learn nothing from the guy on reddit
@@historyfan104 he got it empty too sadly
@BringusStudios of course thats what the guy who tossed it all inside of the trash would say!
The editing, the technicalities, the knowledge, the memes, the older and smarter but also 6 inch taller brother energy, all in one perfectly crafted cinematic experience just for us to enjoy. Thank you, smart internet man!
In regards to the mini Xbox project, there is an ATX standard called FlexATX that has smol power supplies, might be something to look into. Often used for old PowerPC Mac towers.
when i heard "can you feel the sunshine?" almost at the end of the video, i understood the kind of soul behind the technical skills. wonderful job, dude.
Your video's inspired me to not be afraid to cause irreparable harm to my computers. Except when its sacred
I'll be honest. I suck at most of the things you've done today... HOWEVER... I'm tempted now to fit my own OG Xbox into a small form factor dell optiplex case.
I think everyone would love to see the optiplexbox
We will watch your career with great interest.
Ah yes, the school classroom special
@@loganmitchell1382That's an Optibox
It was originally called the DirectX Box, but after the people at microsoft were saying 'directx box' over and over every day, people naturally just shortened it to 'the xbox' when talking about it. DirectX is a 3d rendering api made for windows, so it's no surprise most of the consoles are x86. That is completely expected in fact. Only the PowerPC xbox 360 is the outlier.
and the Xbox was green because the designer only had green marker
I mean... the original Xbox is practically a PC as off-the-shelf as a console could possibly be. A standard Intel Pentium 3 mobile CPU and Nvidia GPU, standard HDD, heck it's even running a build of Windows 2000! (albeit with custom kernel modifications to replace the Windowed desktop and add some additional APIs)
Iirc the controller ports are also just funny shaped USB ports, which is how the remote adapter enabled additional playback functionality.
@@Chickenbreadlp yeah an xbox already runs windows under the hood at its core but with a custom user interface and components. It even has the edge browser
The OG Xbox predates the Edge browser. Even the Xbox One launched with “Internet Explorer”. You’re thinking of Internet Explorer.
@@309electronics5 this just makes me doubt that they couldnt make the new xbox's fully backwards compatible
I know it was SUPER fast, but I picked up on the Brody-quest reference. You have no idea how happy that made me and how glad I am to be subscribed to you. The way I screamed and pointed it out to my husband.
This is the 4th video what I'm watching from Bringus Studios and I never was a "hardware guy" but I'm absolutley love your videos ! Your style, the editing it's just more then perfect ! Plese never stop to doing thes videos !!
Absolutley best channel on YT !
I was a beta tester for the Xbox and I can confirm that these were used. However, they kept them under a sheet when we used them and they rarely had side panels installed.
How did you become a beta tester?
This is very interesting.
@mr.medioker5 how does anyone get hired to work anywhere?
@JK-gm6kk how do you get born?
¨dont get me wrong i am okay with elderly abuse¨
-bringus 2024
290?! ALREADY?
Loser
Mike Stoklasa has entered the chat
@@Plumkinlatte Oh, you won't believe what happened next...
@@jawharp1992time to do the osteoperosis dance
bringus, I have to say, thank you. from all us hobbyists out here, thank you for making the guide and everything free.
Hi Bringus I found your channel yesterday like mid night and I was suppose to study for my DSA exam but I liked your videos to much i went like till 5 in the morning watching your videos and FKED my exam but anything for this channel. Great Work keep it up.
Oh god, that microsoldering to flash the BIOS brings me back to having to solder jumper wires onto 2 pins even closer together to get serial and hack a board.
Thank you for not destroying the original Xbox alpha development kit case!
Thank you for not only calling it Twitter, but using the correct logo. Keep it up! Never let it die!
Yes
Imagine calling it X like bro we get it you’re watching extremely gay porn
Twitter can't hide from itself
stupidest rebrand in history, ain't nobody ever calling that shit "X" like what were they even thinking
It's Twitter and always will be
8:20 how dk oldies “refurbishes” their consoles
i was going to say that lmao
😂😂
ur being too generous 🤣🤣🤣
most of the time they don’t even get the dust off inside those older consoles before selling them
that'll be giving them too much credit, im convinced that they dont even take apart some of their "refurbished" consoles for clearing out dust and other debris much less do any actual repairs on the hardware
the amount of effort that went into this project is ungodly amazing
I would highly recommend picking up a chisel tip for your iron. That narrow conical tip doesn't present very much contact surface area at all and is making things much more difficult for you!
man I've wanted an xbox og devkit for so long, but theyre basically impossible to get! It's incredible that you got your hands on even this case!
I think it would be cool to get the original innards and make a custom case that makes it look like one of those 2012 "xbox 720" wacky cases. Maybe even the classic concept case that was just a huge stainless steel X
Being near an e-waste store must be like a kid in a candy shop for nerds like you Bringus. If I tried to mod a console I would find a way to frag grenade myself and get my foot stuck in the microwave but that'd be a cool place to look through I feel.
Not only did you do an awesome xbox to pc conversion, but you are letting us do it too. Truly wonderful
Dude. You did that thing justice and then some. This is my first video on your channel and it definitely won’t be the last 💪🏼
This video was so cool! Such a W releasing all the STL files, fusion project file, and build guide for free!
i was wondering what you could do with a video about the Alpha I, and oh my god you banged it out of the park
such a sick build; i love that you tried to include the 2000s PC hobbyist aesthetic into it
Seeing an og gmod idiot box reference has made my whole week.
That was SUCH a good video.
When I saw it in my notifications, due to the title, I feared that nothing much would be added to the LTT video but the fact that you basically entirely modded an actual xbox into an empty case was so fun to watch. It is also incredibly motivating for my own dumb projects.
(Photogrametry seems to have a lot of potential too)
(Ps. Excuse my english, i have a terrible headache)
Photogrammetry is truly a love/hate relationship, lol
I personally use Meshroom for photo based photogrammetry, since the node system lets you do some extra stuff, and Polycam on my iPhone for LiDAR based photogrammetry of larger spaces.
What exactly is good about this video? Someone made a redneck Xbox mod o.O abysmal camera work, super annoying voice. Jesus, I wish YT wouldn't put shite like this in my timeline.
dude that Xbox2HDMI is a godsend. that is such a good product and it rejuvenated me into playing my xbox more
Mad respect for actually posting the 3D print files. Can't wait to see your next project bro
Thx for the old computer audio it’s actually crazy good for a game or film :D
would be an awesome sample
This project is the ultimate unholy synthesis of jank and perfectionism. I don't know how you made it work, Bringus, but you're a legend. I salute you, sir
nope - he did a small fail by picking a dodgy psu - he should have gone with an FSP powersupply since it's a good brand and usually comes in grey.
The idea of a xbox tower is just so cool! I've seen water cooled xbox mods, and that would likelly mitigate the cooling issues as well if you where to join the concepts!
I found out about you last night and I've been half listening/ half watching your videos while I work for at least 8 hours. I own a 3D printing business and tinker with other tech myself, so I freaking love your content. Perfect blend between meme/ shitposting and genuine limit-pushing innovation. You're a legend, keep doing awesome shit.
anyone else watch videos like these and not understand what's being talked about 95% of the time but still absolutely enjoying them ?? lmao , i feel like a kid watching their dad repair something and not understanding what's happening but still being proud
This has to be one of the best videos youve made up there, for me, with the google meet and ps2 mod videos.
Always enjoyable and incredibly entertaining, thank you Bringboy
Man I was so tired rewatching all of your videos this one felt like I won a goddamn lottery, big fan of your content!
babe wake up, bringus studios just uploaded
You just released your model files without demanding patrion or channel membership? in 2024? This man is a saint!
I discovered your channel today and I truly believe your a genius. What an amazing content, keep going!
A truly beautiful build. This reminded me that I need to get my Xbox out of storage and replace all the capacitors due to them starting to go out. I also didn't know about the Electron Xbox HDMI adapter, and now I'm definitely going to grab one!
9:21 capacitor ear wax... right as i was taking a drink, man nearly made me run my 18 year old keyboard
o7 keyboard
@@rundomrun logitech g11 for the win lmao
that keyboard is legal 👀
I've got a 20-year-old keyboard I found in a dumpster with a massive coffee stain on it and a bent PS/2 pin. After a clean-up, it functions perfectly. Old keyboards are resilient.
@@goeland4585lol
10:39 the robocop WHAT?!?!
Pube.
@@tyttuut - _taking "manscaping" to a whole new level_ ...
Retro hardware collector/enthusiast here!
I somehow had no idea these existed, but I realised from watching the video that I have most of the components to build one of these (other than the chassis and proprietary things like the sound card) sitting in my storage cupboard.
I also use original Xbox 8GB hard drives in retro builds, because they are cheaper and younger than other sub 10GB IDE drives so the capacity is period correct, and they have less chance of immediate death. I actually have a whole box of them for that purpose.
Nice video, very interesting, it has given me several ideas!
Linus Tech Tips: **builds a console form factor PC**
Bringus Studios: **builds a PC form factor console**
Woke up at the perfect time to watch this new episode, Might make a Optibox.
That startup sounded SO GOOD
0:30
one of the facts that made i like xbox 360 so much, is that the first XDKs before partnernet and DevKits in 360 Format was Literally the Power Mac G5 with an xbox logo in the front
Why can't i stop watching this guy's videos.
Other than your hang ups on optical media, I really like your videos. I've watched a few and this one earned a subscribe.
5:29 That was me back when I finished HL2 episode 2 as a kid
I haven't even finished Half-Life 2. I should really get to that.
I haven't even finished Half-Life 1
I edited my message so nobody knows how I got these likes
Same
Omg7 mins ago sir brigus is cooking
For supper tonight
Finally I have some video to eat while I watch my lunch
it is lunch for me
That startup sound is *sublime.*
That was without a doubt, the BEST Xbox mod video I’ve seen in over 23 years! ❤
I loved the whole build, the green led fan tied it all together so nicely. Congrats man
Never thought hearing a 19yo screw being unscrewed could literally give me a headache but here we are
Never so fast on a new vid, after playing tf2 with you. Thanks for the vids, as a modder myself i love these vids.
Bringus is officially a legend
Yep
This was an amazing conversion/ restomod my friend! I love it! I found your channel outta the blue while sleep deprived af so this has been a journey 😂
Your comedic timing is SO ON POINT! I LOVE IT! Just started watching your videos. I'm on a "Old pc" kick for the time being. Love what i've seen so far!
6:19 "don't get me wrong, I'm ok with elder abuse" 😭
😭
36:10 what a cool symbol
9:16
"Who likes isopropyl alcohol? You do, you do!"
* Giggling *
Lmfao why is that so funny 😂
THANK YOU FOR MAKING ALL OF THE PARTS AVAILABLE!!! You're a god among insects.
I have a Xbox OG that's got a soft modded HDD and it's just collecting dust. Now I know what I'm doing with it.
You make me want to do engineering. I remember a dude named dani who motivated me to get into programing. Thanks❤
Ok, but can it run Linux ?
Always has been (Only half joking)
It can run react os
ever heard of XDSL
And by extension, doom?
linux is literally how softmodding works on the system to begin with lmao
35:54 No one going to talk about the funny way the light forms on the fan.
1945's average gaming fan
Well even my Cooler Master standard fan setup inside my case looks similar when it comes to their placement of led lights.
1:25 hey, that me! :D
What you did, I think it's sick, are you still using it?
i honestly dont see whats wrong with it. its not like its the only one in existence.
i wanna know why you did get rid of expensive components
Sucks that you got people insulting and making fun of you though…
You guys misunderstood me. I'm not the guy who dephiled the sacred alpha kit. I'm the guy with the clear and green development units pictured right before. 😅
It's awesome that you give the pintables for free! Thank you!
This is so cool, and i am so surprised that this even worked
Its truly a beautiful product
bringus my beloved
Makes me wonder what the next gen PS6 And Xbox will contain for hardware.
how is no one talking about the shape that makes the gaming lights in 36:00
i did nazi that light pattern coming
Amazing diy project. Totally impressed on how graphics look with that dongle.
I’ve been watching since you had 9000 subs… crazy how you’ve developed as a channel. Your video quality has drastically improved, and I think that the format of the videos now are amazing to me. Keep it up :)
I've said for years "its always been the battle of computers disguised as consoles"
Except for nintendo where the console's selling point is less related to hardware than games. I would say if nintendo sold an actual case priced the same as 2016 gaming pceven with the same specs people would still be buying it in bulk.
25:10 the optical drive went wild
More like 25:05
"I did a tech project on something I could only find 3 existing copies of. I'll release all the documentation in case you want to follow along at home!"
Lmao
i've been a user of opera since 2014, on pc and phone. i love it and i am proud to have witnessed all the changes it has gone through
It's kind of spyware tho
Impressive. The amount of respect towards both the Xbox and the Xbox Dev Kit is, well, respectable. That's a fabulous project, well realized.
GG. :)
5:22 Because I like to have at least a little bit of privacy.
13:17 look into picoPSUs, that would allow you to use a dc barrel jack adapter
Just found your channel today. It’s the best thing I’ve seen all year man
as someone who actually likes optical media thanks for keeping the optical drive in
34:49 this is better then asmr
36:42 THE BARBIE MONITOR!!!!
8:31 are these the world's most crispy screws
let's find out
It was
Even with my low attention span I watch these videos in one go, that's how good this is
Its 12 23 and i want to sleep but i remembered bringus uploaded so i gotta watch it