Apart from the 'blue stuff' what other tape is being used around the rings and letters ? what type of paint is being used ? does anything need to be put on top of the paint to protect it from the elements, car washes etc ? would have been nice to get this info on the vid rather than just seeing him do it !!
awesome job? but did you move your quattro over?! every audi ive seen and on mine it's been aligned right under the "2.7" or 3.0 or w/e size engine instead of aligned to the right.
There's nothing odd about the quattro badge position, it's in the correct place, to the right of the engine size badge, as with most Audi's, Google it.
I tried to plastidip the emblem on my audi yesterday but it didn't work as well as in your video. When I pealed the outer edge it didn't come off clean but took some paint off the rings. I had to use a tooth pick to separate the rings from the edge but it still wasn't perfect. Any tips? (I did leave the paint inside the rings and like the way it came out btw).
Besser sie kleben ihr dämliches Vier-Ringe-Logo hinter dem Motörchen an die Spritzwand. 😄 Dann braucht sich wenigstens niemand für sie fremd zu schämen. 😆
The red T has a nice touch. Might just do this to mine as well. Thank you sir.
LiftOrGTFO good luck!
Looks Great !
Can you go in a washstation or the colour goes down?
Thanks alot....now I have to do mine🤙
Let me know how it turns out!
@@starvatorjust did it. Not too shabby Thanks for the video! instagram.com/p/B-VW9Zrhblm/?igshid=191y4v6k2kjyi
Those green accents are sick! Looks great
@@starvator thanks bro! Wouldn't have done it without watching ur video🖖
Hey how did you remove the inside of the emblems? The middle of the a and rings ect? Thanks
Toothpick!
Starvator how long did this hold up for?
It still looks good after 4 years
Starvator thats great to hear. Do you re-paint it often? Or was it only once, i’m interested in doing this
Only once
Hey how many coats of plastic dip did you add? I am going to do this to my A5. I think it’s too much work to remove and replace with black ones.
IIRC 3 or 4
What spray are you using
ok looks great, how about washing manual? plastidip still is on the letters and logo after car-wash?
4 years later, the black is still in good shape, the red had faded a little.
@@starvator thanks a lot man, great job, i want to buy black spray to interior. :) greetings. thank you! :)
Good luck!
Hi there I am considering doing it on my Audi A5 2021 quantum gray. How many cans of plastdip do I need?
1 can if it's just logos
can this be peeled off of the badges if you want to remove it?
yes
But how is it just coming off everywhere except for the letters? Is it really this EASY?
Apart from the 'blue stuff' what other tape is being used around the rings and letters ? what type of paint is being used ? does anything need to be put on top of the paint to protect it from the elements, car washes etc ? would have been nice to get this info on the vid rather than just seeing him do it !!
nothing else.. it's plastidip, so it peels off. Still looks great!
cool...
What about a car wash? Will the plastidip last?
Yup
Dose this come off when you wash the car a few times , I’m after it to be permanent
From my experience as long as you dont directly jet wash it, it doesn't come off
Hi mate how does it peel off paint work but stays on badgers?
It peels off badges too when you don't want it anymore
Nice job
Has it held up through rain and car washes? Have you had to make any touch ups?
It faded a little, but still looks great (held up through rain, car washes, snow, ice)
awesome job? but did you move your quattro over?! every audi ive seen and on mine it's been aligned right under the "2.7" or 3.0 or w/e size engine instead of aligned to the right.
Came like that from the dealer!
@@starvator wow really? :o that's really odd. usually the are all aligned left.
There's nothing odd about the quattro badge position, it's in the correct place, to the right of the engine size badge, as with most Audi's, Google it.
How many layers and how much time in between?
4-5 layers, I let it dry for 5-10 minutes between
Cuantas capas?
How do i prevent that the colour is stacking up at the lower end of the back emblem. Am i spraying too much? Any tips?
Ya you are spraying it on too thick. Try thinner layers and let it dry between layers
during each layer how many times would you go back and forth with the spray bottle?
Matt Trowbridge maybe about 2 or 3 back and forths over each part. put enough that you see a difference, but not enough that it drips
good lookin out bro thanks for the quick response. I have and audi 08 b7 a4. Respect!
This is a 2009, you can check out my 2004 one here th-cam.com/video/pJu8oQVlbc0/w-d-xo.html
What brand of paint is that????
It's not paint, it's plastidip
@@starvator .. Oh ok, my bad. I need that!!! Lol
Не проще было отклеить эмблемы?
What is the name of this spray
Plasti dip
I tried to plastidip the emblem on my audi yesterday but it didn't work as well as in your video. When I pealed the outer edge it didn't come off clean but took some paint off the rings. I had to use a tooth pick to separate the rings from the edge but it still wasn't perfect. Any tips? (I did leave the paint inside the rings and like the way it came out btw).
Xavier Sebastien it sounds like you sprayed your layers too thick!
Remove all the batches just leave Audi batch thrre
batches, wow
@@winloft xd
IS me audi
Besser sie kleben ihr dämliches Vier-Ringe-Logo hinter dem Motörchen an die Spritzwand. 😄
Dann braucht sich wenigstens niemand für sie fremd zu schämen. 😆
I just didn’t like it.
Fail video. Too fast and covering the camera.