Ford Focus 2012 1.6 diesel Econetic 77kW - EGR Valve (no audio)

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 22

  • @adpsimpson
    @adpsimpson 3 ปีที่แล้ว +1

    Thanks, very clear video.

  • @robertpalmer5803
    @robertpalmer5803 2 หลายเดือนก่อน

    Very helpful...thank you.....

  • @BlakeCDS
    @BlakeCDS ปีที่แล้ว

    Is there direct access to the EGR valve or do you have to remove anything else

  • @Gooddyear
    @Gooddyear 9 หลายเดือนก่อน

    Добрый день. Подскажите где взять такие крепежные болты на клапан ЕГР. Бывший владелец наверно хотел открутить и повредил их.

  • @Susi-ox8nl
    @Susi-ox8nl 2 ปีที่แล้ว

    My Volvo V60 MY2012 1.6 Drive has the same engine (D4162T = Diesel; 4 stroke; 1,6 liters; 2 valves per stroke; turbocharged). For I got the error P042E in Torque-App and the engine goes to "reduced power"-mode I ordered a new EGR and searched for a removal tutorial after I worked on it on two afternoons. Twisting was possible but the item won´t move any mm in axial direction. So - I have to try it again. Thanks for the vid!

  • @danielfata56
    @danielfata56 4 ปีที่แล้ว

    The best

  • @markbertenshaw3346
    @markbertenshaw3346 4 หลายเดือนก่อน

    Done many if these egr valves they go bad at the electronic side of things , sometimes it can be soot build up even after cleaning. majority of the time they still fail

  • @faikkara809
    @faikkara809 4 ปีที่แล้ว

    Perfect thanks

  • @BaMbOoZeD
    @BaMbOoZeD 4 ปีที่แล้ว

    Mine egr valve is stuck pretty much 🤔 so I gave it some let go fluid over this night.. So I hope it can come of tomorrow 👍.. Got a engine error while I drove home from work, nada effect on the engine, because it went into fail safe mode. The upcoming bill at Ford workshop is around 1000 dollars for work hours and the egr valve 😭😩 so expensive..

    • @tomozabal2844
      @tomozabal2844  4 ปีที่แล้ว

      Good luck.. let us know, if it worked

    • @pastasam4069
      @pastasam4069 4 ปีที่แล้ว

      Did you get it sorted? Garage quoting 310 parts and labour but it doesn't look too bad a job.

    • @BaMbOoZeD
      @BaMbOoZeD 4 ปีที่แล้ว

      @@pastasam4069 Yeah I did get it done. But the bill was on nearly 1100 dollars at ford (egr valve 715 dollars) workshop 😬 so yeah original sparepart cost a lot. But my car works again 👍. But I have a little bit of doubts about it, seems weird that the egr valve was in frozen condition on the error code. Some other things can also generate that error 🤔

  • @mladimutant4498
    @mladimutant4498 7 หลายเดือนก่อน

    1000 tnx

  • @sheeprir1
    @sheeprir1 ปีที่แล้ว +1

    Don't press on the plastic. It's likely to crack

  • @nirvana9610
    @nirvana9610 3 ปีที่แล้ว

    The egr valve is never dirty on those models because the mixiage with intake oils is far away with the pipe. if you remove the pipe, there is where you find junk.

    • @CarloLeonKolega
      @CarloLeonKolega 2 ปีที่แล้ว

      what pipe?

    • @800mint
      @800mint ปีที่แล้ว

      Yes, what pipe do you need to check?

    • @nirvana9610
      @nirvana9610 ปีที่แล้ว

      The pipe that connects the egr valve to intake manifold/inlet runner

  • @Στάθης-σ6ν
    @Στάθης-σ6ν 4 ปีที่แล้ว +1

    Nice video mate may I ask how many kilometres or miles does the vehicle have ? Did u notice any difference after cleaning it ? I think I was pretty clean btw

    • @tomozabal2844
      @tomozabal2844  4 ปีที่แล้ว +1

      Hi.
      Thank you.
      Actually, I did not notice any difference after cleaning. I made it more less like prevention.

    • @Στάθης-σ6ν
      @Στάθης-σ6ν 4 ปีที่แล้ว

      Tom Ozzi thank you for your reply . I believe you as it was almost like brand new. I have a Volvo C30 with the same psa Ford engine and I am thinking to give a try cleaning it. Is it that hard to get it out ??

  • @astranuggets
    @astranuggets 2 ปีที่แล้ว +2

    Bruh... No sound, no direction. Literally terrible video and very unhelpful for someone who is trying to learn. Please edit with voice over ateast and repost.