aftermarket power steering fluid cooler, should prevent boil over with drifting/autocross use. 8x5 inch x 3/4 inch core, 4 pass oil cooler. song by Beats by Con Soundcloud: / jadon-converse
@@clubtouge1052 thanks, i'm doing the same thing this weekend and wanted to make sure I wasn't missing something. I have the same issue on the overflow + my splitter mounts are interfering so two birds with one stone
@@clubtouge1052 OK subscribed: ) I got myself a redline fluid now, mine is 91 1.6 . Let see if it would overflow...I kinda dont want to install a cooler because not sure which hose to connect to? Or is it just pretty much replace the stock one if there is one? XD
@@lukazleong thanks:) and yeah just peek up under the grill of the car and you should see a Hardline loop secured to the backside of the crash bar. The cooler install is easy and there are only two 3/8's hoses to deal with , basically just follow them to the source and route them to the cooler Try the fluid first tho 👍
@@clubtouge1052 thanks,last question i promise ! 3/8 hoses i found is this www.ebay.co.uk/itm/10mm-3-8-I-D-EPDM-Car-Heater-Coolant-Rubber-Hose-SAEJ20-R3-Engine-Rad-Water-Pipe-/250750481877 Will this be ok ? I live in uk not sure where to get these hoses normally .
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Good video,, Mazda MX5 where I'm from.😉👍
Why did you take the belt off?
Sorry forgot to mention i was replacing the p.s pump at the same time
@@clubtouge1052 thanks, i'm doing the same thing this weekend and wanted to make sure I wasn't missing something. I have the same issue on the overflow + my splitter mounts are interfering so two birds with one stone
was it better? I am thinking to do mine because it overflows everytime I drive hard
Yes sir no overflow now. Maybe try to change your fluid first and make sure you even have the stock cooler some cars didn't even have the stock loop
@@clubtouge1052 OK subscribed: ) I got myself a redline fluid now, mine is 91 1.6 . Let see if it would overflow...I kinda dont want to install a cooler because not sure which hose to connect to? Or is it just pretty much replace the stock one if there is one? XD
@@lukazleong thanks:) and yeah just peek up under the grill of the car and you should see a Hardline loop secured to the backside of the crash bar. The cooler install is easy and there are only two 3/8's hoses to deal with , basically just follow them to the source and route them to the cooler Try the fluid first tho 👍
@@clubtouge1052 thanks,last question i promise ! 3/8 hoses i found is this www.ebay.co.uk/itm/10mm-3-8-I-D-EPDM-Car-Heater-Coolant-Rubber-Hose-SAEJ20-R3-Engine-Rad-Water-Pipe-/250750481877
Will this be ok ? I live in uk not sure where to get these hoses normally .
@@clubtouge1052 so you said one is going to low pressure side of the steering rack, and one is for the reservoir right? nothing goes to the pump