I have one question when I bought the car it dose have pre-safe inoperative I have 2010 Mercedes E350 W212 do you have an idea of this issue?? hopefully I can get answers from you soon when u have chance thanks again.
Many culprits to this one. Pre safe inactive will be displayed after a low voltage or battery disconnect. Sometimes If there are no faults with the vehicle all that needs to be done is re-synchronize the passenger seat, steering column, windows, sunroof and initialize the steering angle sensor. Hope this helps.
would have been nice to show how the manifold is taken off instead of just skipping to it and showing the front of ur car for 5 minutes .Nevermind. went to your next vid and awesome job. thank you!
Thanks for the feedback and the follow up. I don't recommend taking the air manifold out to change a fuel injector. 5+ hours of work if you do it that way.
Can I ask why did you take the air intake manifold out and what problems was it causing? My Mercedes Benz C350 is shooting a code for multiple misfires, random misfires, and misfires in cylinder 1 and cylinder 4. With a total of 4 codes. I am about to change the spark plugs and the fuel filter but I believe I may need to do the injectors or the ignition coils.
true... also @ 4:10 in the video injector cleaner is introduced internally. You can attach voltage to the injector to cause it to open and let the cleaner through.
I took an injector off to clean it and now the car is not starting, all the injectors are not spraying, there is pressure in the rail but the injectors are not opening. Help me please
Finally a competent fuel injector video. I can always count on you to give some good Benz tutorial.
Thank you!
I love you man lol everything works as should be in my car I saved a thousands of dollars .. high recommend to you and to your videos. 👍🏻👍🏻👍🏻😊😁
I like the video. It gives clear guidance. I will be able to fix my car
Omg IT is a m272 !!
I search this Videos since weeks!!
did u try an injector cleaner like liqui moly first my 2010 ml350 has cyl 5 misfire its not plugs or coils so im gonna try to run jectron thru it?
Intake is magnesium I believe . 9nM is the torque setting for the manifold bolts.
Is PSI test a must before replacing the injector rail? If so, how did you do it? Thank you.
Did you apply rubber grease to the O-rings and did you replace them with the new ones?
That would be great but you can use a very small rub of motor oil as well.
I have one question when I bought the car it dose have pre-safe inoperative I have 2010 Mercedes E350 W212 do you have an idea of this issue?? hopefully I can get answers from you soon when u have chance thanks again.
Many culprits to this one.
Pre safe inactive will be displayed after a low voltage or battery
disconnect.
Sometimes If there are no faults with the vehicle all that needs to
be done is re-synchronize the passenger seat, steering column, windows, sunroof and initialize the steering angle sensor.
Hope this helps.
iRepair Autos ..
I will try to check all of this and I’ll get back to you when I’m done to see if it will be work. Thanks
would have been nice to show how the manifold is taken off instead of just skipping to it and showing the front of ur car for 5 minutes .Nevermind. went to your next vid and awesome job. thank you!
Thanks for the feedback and the follow up. I don't recommend taking the air manifold out to change a fuel injector. 5+ hours of work if you do it that way.
Can it cause white smoke in the first start?
same problem here. you ever figure it out?
Can I ask why did you take the air intake manifold out and what problems was it causing? My Mercedes Benz C350 is shooting a code for multiple misfires, random misfires, and misfires in cylinder 1 and cylinder 4. With a total of 4 codes. I am about to change the spark plugs and the fuel filter but I believe I may need to do the injectors or the ignition coils.
I’m having the same problem. We’re you able to fix the issue?
You just clean the dust and dirt from the exterior. That spray will not clean the injector spray holes.
true... also @ 4:10 in the video injector cleaner is introduced internally. You can attach voltage to the injector to cause it to open and let the cleaner through.
I took an injector off to clean it and now the car is not starting, all the injectors are not spraying, there is pressure in the rail but the injectors are not opening. Help me please
Hey would this video work for A160 as well
Yes, it's very similar.
+iRepair Autos Thank you
How many fuel injectors are there?
Once for Once zylinder
If you’ve gone thru all that trouble removing the manifold might as well put in new injectors. Not worth cleaning IMO.
Use cilicon on orings...
Can I access the fuel injectors with the intake still on the engine?
+Issa Nesheiwat absolutely!
⛽⛽⛽⛽⛽