Another great video Joe. What I like about you is, you call it’s a bit wet and cold out here with new lines marked. Next seen, your up on 1 wheel on a totally wet road on the slippery new yellow centre line. Kdg mate, big Kahoonas. Hope to see you back on again. soon.
Just bought a 2017 FZ 10. It's winter here so sent the ecu to 2w dyno right away. Hopefully get it next week. I'm getting comp werkes exhaust from bayside though. Great videos bro..
I actually have the WoodCraft clip-ons on my 2020 MT10. It definitely puts you in a more aggressive position. Definitely better for the canyons but it has made it more uncomfortable for the day the day ride. One other downside is that if you're using the stock levers they will hit the front "eyelid" fairings.
I can't wait for the engine mods .... What are you thinking ,? you going to stroke it port polish heads and cam in it?.. I'm going to do that to my 2022 fz10sp... Going with a Austin racing full exhaust also... 😊
What're your thoughts on the 2022 Z1000? Stock. Thinking of upgrading to that. I've also been looking at the ZH2.. For a little bit more on MSRP with a slight increase in HP. Just don't know haha
I know you had the Tuono and enjoyed it, but, I’m comparing these bikes to a Monster 1200. Ever rode a Monster? Can you compare them? Love your videos. Such a badass garage!!
Great setup from jhs racing UK for stock suspension Front preload 14 turn on from minimum, front rebound 3 clicks anti clockwise from maximum, front compression 6 clicks anti clockwise from maximum. Rear preload one and half turns clockwise leaves 15mm static sag , rear high speed 2 & 1/2 turns anti clockwise from maximum, rear low speed 7 clicks anti clockwise from maximum, rear rebound 4 clicks anti clockwise from maximum 👍🏼
WOW those power wheelies are nuts! I've got a Gen1 FZ1 (ie, 2 iterations before the MT10) and it doesn't come remotely close to a 3rd gear power wheelie.
I had the second generation FZ1 and it was nothing like this bike. I've ridden the FZ/MT10 a few times and it's a blast. I just have a hard time getting past its looks. With the 2022 MT10SP coming to the USA, I might have to find a way.
Nice! I have a 2020 MT-10 in black, with a Leo Vince de-cat and need the 2WDW tune, but am living outside the US (living in Thailand for the moment). I'm temporarily using a PCV but there was no power gain. I'm curious which traction and throttle settings you're using. It's hard to see when I zoom in. I also have a Panigale V4S and the MT-10 is more fun to ride :)
You can keep it down if you try to in 2nd but you have to roll on. 1st any power it’s coming up. This is stock gearing. You could go up 1 tooth in the front to make that easier
Hey brother I have a 2020 Mt10, flashed as well. it's my 4th bike but It's the bike that I learned to wheelie on. I however, am not very proficient lol. I've been riding out 2nd gear wheelies ok half the time but my question is do you use footbreak? and if so do you have any tips for on getting better with it. Thanks, God bless, love your bikes!
So I cover the foot break but I don’t use it unless I feel I went too far back. Keep doing second gear powers and getting used to the front coming higher and higher
Dude, I'm on week 11 of waiting for my Austin Racing GP1R. Rep on IG said it will ship at the end of the month. I'm hoping that's true. They really need to step up their production.
I'm on month 4 now of waiting for my Austin Racing exhaust, not too happy with their speed TBH, I know they are "built to order" but still 4 months is ridiculous.
I ordered mine a year ago for the 2020 zx6r, took them 2 months but well worth the wait. Quality is over the top and the sound? Nothing better than the sound of an AR. Its because of the BS covid measures that theyre taking so long
ok bro sorry to ask because we dont have weather like yours.but its ok we wait until you uploads more videos. and hope bro you'll mate again with 650ib and smack down. with your h2's.stay safe bro.
If it does that’s great! I’ve ridden 3 different stock geared mt09s and none would power 3rd up. But there’s always an exception. The mt09 is a fantastic bike
@@masterbruce937 me personally yes but I have only ridden a Zh2 once. In a naked bike I’m more looking for wheelie fun and corner flickability. The zh2 can wheelie but the mt10 is just the most fun I have had on a naked.
For the people reading this! I wanna buy a mt10 give me some pros and cons about the bike.. Give me some other bikes to compare it amd maybe test drive it
Hello my friend, your followers are from Iraq I want to buy bmw1000rr But there are no special colleges for selling bicycles in Iraq. Can you help me with my greetings to you?
Bro that thing is a beast!!! Can’t wait for more content!!
Looks like you been working on your Willie skills lol great job on the review as always
Hahahaha willie skills
Joe that sounds awesome now plus that extra punch 👊
I'm absolutely loving your channel
Another great video Joe. What I like about you is, you call it’s a bit wet and cold out here with new lines marked. Next seen, your up on 1 wheel on a totally wet road on the slippery new yellow centre line. Kdg mate, big Kahoonas. Hope to see you back on again. soon.
Just bought a 2017 FZ 10. It's winter here so sent the ecu to 2w dyno right away. Hopefully get it next week. I'm getting comp werkes exhaust from bayside though. Great videos bro..
I waited about 4 months for my Austin racing exhaust to come in for my mt-10. Totally worth it though!
Me: YES HE UPLOADED
JoeSTI: *casually does 100+ mph wheelie*
Me: shocked but happy he uploaded
I love your videos bro keep up the work 😁👍
I actually have the WoodCraft clip-ons on my 2020 MT10. It definitely puts you in a more aggressive position. Definitely better for the canyons but it has made it more uncomfortable for the day the day ride. One other downside is that if you're using the stock levers they will hit the front "eyelid" fairings.
I hadn't given the mt10 serious thought before your videos 👍 Any news on the turbo Busa ?
Wicked bro! Mine was brentuned but i sold it last year, I’m looking at a 2018 zx10rr 1800km thoughts? And it’s the double rr
Those wheelies❤❤
Digging the black and Gray!
Love the paint looks like my Fz-10 just different colour wheels
I can't wait for the engine mods .... What are you thinking ,? you going to stroke it port polish heads and cam in it?.. I'm going to do that to my 2022 fz10sp... Going with a Austin racing full exhaust also... 😊
What're your thoughts on the 2022 Z1000? Stock. Thinking of upgrading to that. I've also been looking at the ZH2.. For a little bit more on MSRP with a slight increase in HP. Just don't know haha
I know you had the Tuono and enjoyed it, but, I’m comparing these bikes to a Monster 1200. Ever rode a Monster? Can you compare them? Love your videos. Such a badass garage!!
Did you ever get your suspension set up? If so please make a video on it and any info about it would be much appreciated
Great setup from jhs racing UK for stock suspension
Front preload 14 turn on from minimum, front rebound 3 clicks anti clockwise from maximum, front compression 6 clicks anti clockwise from maximum. Rear preload one and half turns clockwise leaves 15mm static sag , rear high speed 2 & 1/2 turns anti clockwise from maximum, rear low speed 7 clicks anti clockwise from maximum, rear rebound 4 clicks anti clockwise from maximum 👍🏼
What tank grips/protectors you are using on the FZ?
What mode where you driving it there? I also got my 2021 mt10 flashed.
Joe! Miss you man, hope you post a video soon. Any updates on the busa build? Hope all is well my friend
Highly recommend 2 wheel dyno works for tuning
Sick now twice as fast as was
I’m definitely gonna purchase this bike!
Did you sell the KTM? haven't seen it in the last few garage videos. Keep you the killer videos!
Amazing bro Joesti from India but missed H2 the beast
Have you shortened your gearing?
Let it rip brah! Awesome vid! So how much hp and nm does your 10 make now?
I havnt had it on a dyno but should be around 150whp
Beast!!!!
Can’t wait to get my mt10
Great love from 🇰🇪
I ended up going with the Toce exhaust on my black on black '20. The bike couldn't be sexier.
WOW those power wheelies are nuts! I've got a Gen1 FZ1 (ie, 2 iterations before the MT10) and it doesn't come remotely close to a 3rd gear power wheelie.
I had the second generation FZ1 and it was nothing like this bike. I've ridden the FZ/MT10 a few times and it's a blast. I just have a hard time getting past its looks.
With the 2022 MT10SP coming to the USA, I might have to find a way.
What mirrors do you use?
Missing wheelies on my 2015 R1 right now, living vicariously through this video until my engine is fixed and it’s spring. (Fuck you winter season)
What happened to the engine, mate?
Nice! I have a 2020 MT-10 in black, with a Leo Vince de-cat and need the 2WDW tune, but am living outside the US (living in Thailand for the moment). I'm temporarily using a PCV but there was no power gain. I'm curious which traction and throttle settings you're using. It's hard to see when I zoom in.
I also have a Panigale V4S and the MT-10 is more fun to ride :)
Thanks! I like standard mode on the throttle setting and I turn traction control off
Also, I'm interested in knowing how hard it is to keep the front end down now when you want it to be down
You can keep it down if you try to in 2nd but you have to roll on. 1st any power it’s coming up. This is stock gearing. You could go up 1 tooth in the front to make that easier
Just don't loop the throttle and you'll be sweet as.
When is upgrade for MT10?
Hey brother I have a 2020 Mt10, flashed as well. it's my 4th bike but It's the bike that I learned to wheelie on. I however, am not very proficient lol. I've been riding out 2nd gear wheelies ok half the time but my question is do you use footbreak? and if so do you have any tips for on getting better with it. Thanks, God bless, love your bikes!
So I cover the foot break but I don’t use it unless I feel I went too far back. Keep doing second gear powers and getting used to the front coming higher and higher
@@joesti7607 appreciate the response man that’s exactly what I’ve been trying to do!!
03:25 is it power wheelie on 4th gear😳
Bro you going to be waiting a long time for the AR. I’m currently at 6 months about to go into 7 months🤦🏻♂️
Dude, I'm on week 11 of waiting for my Austin Racing GP1R. Rep on IG said it will ship at the end of the month. I'm hoping that's true. They really need to step up their production.
Currently at 6 months about to go into 7 months 🤦🏻♂️
I heard that. I'm buying comp werkes instead but not titanium
Right after he talks about a updated mt-10 Yamaha delivered
Purple will be 👌
Don't know if i want to get a gsxr1k or the zx10....hows the zx10 power compare Joe Sti?
I havn't rode either to be honest so im not sure which. From what ive seen both are great bikes!
I'm on month 4 now of waiting for my Austin Racing exhaust, not too happy with their speed TBH, I know they are "built to order" but still 4 months is ridiculous.
Tomorrow is 5 months exactly from my order date
I ordered mine a year ago for the 2020 zx6r, took them 2 months but well worth the wait. Quality is over the top and the sound? Nothing better than the sound of an AR. Its because of the BS covid measures that theyre taking so long
Just saying they make turbo for these 🤗
Red would look sick
Wheelie monster.... 😀
Crossplan monster.
Mt-10 with a supercharger will be really insane
It's so much $$$ 😭
I would absolutely love to see you race against a Tesla model s plaid with the 300 hp H2. Is that something you think could happen someday?
The plaid would eat it until like 60-70 mph then we know what the H2 will do 😆
Would you be interested in adding a centrifugal supercharger to a carb Harley?
This MT10 is raw power, the new MT10 is not that brutal.
Is this guy still alive..???there should have been more video's put by now..
Where'd you go 😢
What brand are these bar-end mirrors?
Moto gadget
hello bro why is there no video came out what happen,??? i miss the smackdown of the the H2.
Winter has hit, making a few build vids but snow and cold weather
ok bro sorry to ask because we dont have weather like yours.but its ok we wait until you uploads more videos. and hope bro you'll mate again with 650ib and smack down. with your h2's.stay safe bro.
and thanks for the heart bro.because only few who notice me to the many youtuber that i subscribe not even seen my comment.
Did he die doing a power wheelie?
Did the throttle get any better after the tune
Ya it did, still touchy but better
What you delay your Videos bro Joesti miss you videos come on let's start
Yeah? Well my MT-09 (2019) lifts with a twist of the wrist in 3rd also.
If it does that’s great! I’ve ridden 3 different stock geared mt09s and none would power 3rd up. But there’s always an exception. The mt09 is a fantastic bike
Your handle bars are pointed to the right on wheelies,Was just wondering why not straight
It’s to keep the bike balanced
@@cxntzz1729 I just thought when you come down wheel needs to be straight I used to wheelie alot in the day.Thanks
ya keeps the bike centered. I use the front to lean the bike one way or another.
@@joesti7607 thanks for response that's my next bike mt10
@@joesti7607 I used to hang off one side myself
What mirrors are You using?
Moto gadget
What year mt10 is this?
It’s a 2017 fz 10
drop a video
+JoeSTi
Which is better Yamaha MT-10 or Kawasaki Z H2?
both are great bikes, I prefer the mt 10 but the zh2 is very good!
@@joesti7607 what if you didn't have the H2 would you still prefer MT-10?
@@masterbruce937 me personally yes but I have only ridden a Zh2 once. In a naked bike I’m more looking for wheelie fun and corner flickability. The zh2 can wheelie but the mt10 is just the most fun I have had on a naked.
gold wheels 👍👌👌
where are you joe
incredible the control you have over her
Yey 2022
💪🏽🙌🏽
Let me know when ya want to sell that beast!
Joe, did you end up selling this bike?
Nope! It’s still in the garage. About to install the Austin racing exhaust
No
G-Shit homie 😁
For the people reading this! I wanna buy a mt10 give me some pros and cons about the bike..
Give me some other bikes to compare it amd maybe test drive it
The only con for me is the 30 mpg. Otherwise I can’t stop riding it. Every single day 80+ miles almost
Yooooo🔥🔥🔥
Hello my friend, your followers are from Iraq I want to buy bmw1000rr
But there are no special colleges for selling bicycles in Iraq. Can you help me with my greetings to you?
Second
First