Alienware Aurora R10-11 swap of fans Corsair Hydro H60 Liquid Cooler, Compare with before and after
ฝัง
- เผยแพร่เมื่อ 24 ธ.ค. 2020
- Corsair Hydro Series H60 Liquid CPU Cooler Install / Upgrade in Dell Alienware Aurora R10-R11
You have asked for an upgrade from the cpu air cooler to liquid cooled. Here you go simple by step by step.
If you have any questions please leave comment then i will reply as early as i can. - วิทยาศาสตร์และเทคโนโลยี
great channel. I will come back here every time I need to work on my R11.
you really did a good job i like how you didn't have that much problems installing everything
great video btw, i also updated my cpu cooler. Your instructions were very helpful
Thanks a BUNCH!!! My initial upgrade were the front and top fans. I saw an improvement. However, adding the CORSAIR H60, I now idle at 38C and reach 49C under load!
Hey just wanted to thank you for posting such a great video. Made the mistake of ordering the R10 without liquid cooling and my temps in-game have been hovering around 90-100c. Just ordered my H60 but I have never installed something like this before so this clear step-by-step video is super useful. Much appreciated!
Be my pleasure^^
I made the same mistake :/ first day with my new set up and I’m running at 93c just playing a little Warcraft, Ryzen says the new chips can run hotter but I just down like it, plus the fan blowing like crazy is annoying
What is the temp difference with the H-60 in?
I got the R12 at best buy and there is no cooling option under 2000 dollars so i ordered this water cooler and dual channel ram. Thanks for the video. I was glad to see you didn't have to remove the motherboard to install a new bracket. I was hoping for that. Much easier. Thanks for the video.
that is now a nice job man,now CPU working as well,and boost himself above 4.2GhZ with temps under 70c...Great job ;)
Thank you, it is really better than before, but still not commit what I expected. It’s hard to find good cooler for this case. :(
Hello! Thank you for this video! I'm getting ready to do this same installation on my R10 too for the same overheating issue. I'm going to use this as a guide to make sure I'm doing it correctly. I'm excited and can't wait to see the difference!
sid it work
@@jakobyunknown I will be performing this process on my Intel i9, Air cooled CPU to Corsair H60 AIO w/ likely within the next 30 days, I've ordered the cooler and the VRM heatsink, now just looking at fan options. Lots of research is required and my go through at it will be the latest to date of someone doing it so I'll try to put together something to share to help others, at the very least a long comment explaining how it went.
Omg thank you so much my cpu used to run at 90c max now runs at 60c max tyyyy much respect
Is it easy to add? I'm worried I'll break something
if anyone is planning to buy this pc, make sure to go with the liquid cooling option. otherwise the cpu runs way too hot and the pc is too loud
Agree
I find my R10 (5900X CPU) a bit loud even with the liquid cooling (perhaps my old machine was just really quiet...). I have a 6800XT GPU as well and it's not what I'd call quiet either... A little bit of fan noise while gaming aside, I love the computer and would absolutely buy it again.
@@xKrispyx my buddy said i can transplant the guts into a NZXT case. maybe a better case for the beefyness in your rig my help out? :]
@@kevinsowards9647 I think I'll have to go that route, eventually. At the same time, I don't want to give up any front panel I/O, and the R10 has a pretty solid front panel port config. I looked at the Lian-Li Dynamic O11-XL, I'll definitely look at the NZXT options as well.
@@xKrispyx yeah man. I been looking to buy my first rig and I did. Well I wanted to build a rig but since the market it all messed up and gpu price skyrocketed, I figured I just get a pre built. So I had 2 good options for my price range and they both got sold out.. and this R10 Ryzen 7, with a radeon 5700 was in sell for 1,250.. so I'm stoked.. saw alot of good reviews. Only issue is the ventilation from the sound of it. So I feel I didn't do to bad lol.
Still such a great video, thank you.
My R10 runs at 90-95c any time I'm in a game and at 75-80c at idle. I'm going to see if I can install an H60 today. Thanks for sharing this with us!
Yeah, It is really rediculous temp for this PC, I stronly recommend you are going to change as early as you can, otherwize will reduce the CPU lifetime as always runing high temperature.
@@ironytech3443 I replaced my fan with an H60 + PL120 this afternoon and I'd say on average 25c lower in games and at idle (50c at idle and 70-75 in games). I know they say it should be lower but honestly I'm happy to be pushing 240 FPS and not being at those crazy temps. Thanks again!
Not surprisingly cooler temps, but damn, the fps jump is eye opening! This will make the hardware last longer too. Nice!
Thank you, well the FPS drop down is that i set game Ultra setting when i record after changing cooler ^^. but temp is really good.
Great video, where did you source the bolts with the equal length on both sides from? Cheers in advance.
Great video. Been trying to find a blueprint for taking my R10 apart to add new CPU cooler. But why do they use an LGA115X socket mount for Ryzen?
just got the r10 ryzen edition and have never upgraded to watercooler before going to try it out too
Nice! I am planning to install the cooler as well for my new R11, I was wondering how difficult it was to take the top case cover off like you did without breaking it lol? Did it have alot of resistance when you pulled it off?
Well, You just force a little pull out is ok, don't need to give much presures, if you afraid to break that, one tip is that, you don't need to take the top cover and then able to install the liquid cooler from inside, so do it without take top cover is ok, no problem.
Hey Ironytech, what sort of screwdrivers would I need to do this? i feel pretty confident I can follow thsi tutorial and get it done.
Thanks for their video! Recently picked up an r11 and looking to do this install. How is it holding up? Also did you install vrm heat sinks? Or can this do without ?
No I didn’t install vrm heat sink. Not mandatory
@@ironytech3443 thanks!
i got my aurora 10 after new years, im order this cooler
Way to go, This is nice PC,
another option folks is deepcool gammaxx l120 v2. Works perfect in my R10 Ryzen edition. no issues with Fan/bios. cost me $60 CAD
Well, How about temp when you are playing game? pubg and warzone?
is the installation the same as this H60?
@@haoxianfeng9117 yes except for I had to get rid of the metallic "box" where you suppose to insert the AIO, I only used the plate with 2 screws to attach it. Better airflow. I got Ryzen 7 3700, so now my temps are around 75C under load. with aircooler were 90c
@@Denis-yyccan if i don't remove the metal box, i won't be able to install the deep cool AIO?
@@Denis-yyccan btw, where did you get that for 60cad after tax? amazon is selling $64.99
Just FYI: Dell uses a CPU mount close to LGA115x for AMD. Also if you plug into the Pump header it will trigger a BIOS error unless you order VRM heatsinks from Dell.
Hey there! Thanks for the video! I'm looking at the H60 as well, for the alienware r10. You made this video a year ago, How are you liking the H60? Is it working well?
It’s absolutely working good and much better than stock fan, but it still can’t good reduce temp, u had better to look H80i v2 if u wanna more cool for CPU will be more better than H60
@@ironytech3443 Thanks for getting back to me! Appreciate it. Glad to hear its still working for you.
Im also thinking of switching the front fan and installing a 2nd in the HDD slot. Do i need to turn after dat or not? not pretty sure about it
Can I ask what you plugged the bug one into from the cooler? When there’s 2 chords
If you mount the intake fan in the place of the top HD bracket the results are really good, i had to do it as my Gigabyte RTX3070 Vision would not fit otherwise :) i am getting normally 40C CPU and GPU on idle and mid 50'sC CPU & CPU while gaming, this is with stock fans and stock liquid cooler, I am going to install Corsair ML120 Pro soon, but i just built my aurora so i can enjoy it a little bit before i dismantle it again. Please bear in mind i use Ryzen 3600 which is only 65W. I also don't have any HDD only SSD
After pushing system further with MSFS2020 CPU can reach 60-65°C GPU stays below 60°C
ML120 are definitely quieter, but still audible, i sandwiched radiator with two of them and also installed intakenone in the place of HDD
I just bought a mid tier R11 (i7/RTX 2070Super) without liquid cooling and it does tend to make a racket under load but the temps never exceed the mid 80 degree range on the CPU while the 2070 seems to vent quite well. In retrospect, I think I would have gone liquid with this R11 but know I'm too damn lazy to attempt the swap you have going... it's a lot of bloody work and you can be guaranteed a few things will be either too short, missing or incompatible :)
how is yours holding up? i just put an msi rx 6600 in mine, and my cpu temps have been hovering near where yours were. its got me debating upgrading to liquid cooling. of course i bought mine used from a family member, but it was never used very hard. just trying to make sure i dont stress it anymore than it may have already been
do you know what size of screws are needed for mounting fan on the radiator?
DP you need heat sinks for the h60 to work?
Nice Video! I have a question. How did you secure the radiator? I didn't see a screw I could use. Is it held in by pure tension?
Well, There is no extra screw to solid the radiator, but fortunely the radiator size fit into the fan cage very tightly? so i didn't screw radiator to the cage., if you think feel distressed ？ Then you can buy 4 crew to assemble radiator to cage.
Do you think a H100i v2 will it fit? I have the same case. Thanks.
Does this work on an r9? I already have the cooler. But all I see is r10 videos, except 1 video but unfortunately it’s not a tutorial.
Late comment, why didnt you plug the pump into the cpu_pump header?
I have the R10 same one as in the video you show, will the Dracaena 120mm AIO CPU Cooler be compatible with it??
Yes, absolutely u can.
I brought two Corsair ML120 to MOD my R11 original liquid cooler
What about the heatsinks?
I love my R11 but noticed the CPU temps were awful. Dell shouldn't sell these with air coolers, the case layout is designed for liquid cooling. I have this part coming tomorrow and hope that it will work well. Thank you!
wow, Congratulations and hope everthings go well. ^^
How did it go? I just ordered this cooler for mine too
@@msharmall7298 Not too bad, but only one things that not be able to controll Fan RPM, if can that will be perfrect ^^
I got a bios error is that a one time error or will it keep coming up?
My r10 comes in the next few weeks, I got myself a different fan so Corsair fan, I was wondering if it's easy to add a second intake fan. And do you need splitters to do this? I did not order with a hard drive. Only a ssd. I'm just worried I'll break something if I try to do this method. I could've sworn I've hit the water cooled option. I guess I didn't cause on the final paper, it says smart cooling.
In my opinion, that is easy to replace cooler as well as fan, u just watch my vedio carefully and do that, don't worry.
Does the corsair come with the 120mm fan? Do I need to get an extra 120mm fan as well? Nice video
No, you don’t need, there is a new 120mm fans with cooler. Thank u
@@ironytech3443 thanks. I'm going for a sandwich setup so I may end up getting an extra fan. Keep it up.
awesome job! does the R10 have space for 2 GPUs?
Yes it is, very tied space, but be able to double GPU as long as size same with original GPU
@@ironytech3443 I don't know about Radeon, Nvidia 10 series, 16 series, 20 series, RTX 3060 & RTX 3070 cards but at least the RTX 3080 & RTX 3090 are custom cards made by Alienware so it would be impossible to get a new second card of the same brand. Is it ok to be different brands? If not, then you'd need to get two cards and you could easily sell your card to someone with an Alienware R8-R11 who wants to upgrade or someone else who wants to do dual card lol (although you should always keep original parts until the warranty period expires).
Also keep in mind that you need to make sure your GPU is under 276mm (~10.5") in length and under 118mm in height to fit the case. Those are the size maximum specs as I was told by Alienware for the primary GPU. I do not know if the secondary GPU would be different.
Do you play CPU intense games like COD Warzone? If so, what are your temps like while playing that?
CPU and GPU both of around 72degree, u can refer to below my testing video.
th-cam.com/video/UFqagwvIX68/w-d-xo.html
What about the VRM heatsinks? The air cooled mobo's do not come with them. Wouldn't you run into major problems with the 2 heatsinks that dell provides with their water cooler?
This is good questions, You are right there is no VRM heatsink if you choose options of aircooler, but i think VRM quality not too bad for this MB from factory coz Alienware originally launching for Over clock features.
just in case i already sitck the thermal pad on my VRM in order to get good performance. ^^
Great video. Can’t believe Dell even gave the option for air cooling. I went air to save money for other upgrades. Two questions. One, the air cooling it shipped with sounds like I’m at the worlds largest airport. Will this help with noise? Two, was the case in this video the R10? I have the R10 AMD Ryzen 7 3700X version. Will the H60, as shipped, fit this AM4? Also, can this H60 fan be swapped? Thank you
Yes, this is my R10 Ryzen7 3700x serise, yes the H60 be able to reduce the noise than before as well as will reduce the temperature. Yes H60 fans able to swapped the others as long as 120mm size of fans
@@ironytech3443 Thanks for the video. Got my H60 yesterday. Slapped it in in about 30 minutes. Only thing I did differently is I pulled out the top fan housing rather than popping the top of the case off. Mounted the radiator and fan in the housing and then the placed it back and screwed it in. It was a pain, but every time I pull on plastic lids, I end up breaking shit. So I did it that way instead. Your choice of the anchor screw size to the motherboard was spot on. Very valuable information. My R10 is finally quiet and never above 82c under heavy load. Thanks again. Glad I seen your video.
Edit: can’t believe Dell even offer this build with an air cooler. I figured they new what they were doing and put that money towards upgrading elsewhere. End of the day, I ended up paying for liquid anyway.
@@tpnurdle1 Wow bro, it is absolutely nice work mount radiator into the top cage with crewed, That is what i sugguested everybody have better screwed coz it will prevent radiator drop down. although my radiator is not drop down so far but who knows for future, however congratulations and enjoy your monster.
My alienware command center is showing lower temps but the heat expelled from the top fan is HOT! Is this normal?
On another video I saw that the person kept the black metal housing for the radiator, and here it seems you do it without, Im curious. Does it just actually snap into place and stays held together? Because if so then I will be extremely joyful to know that.
I don't understand what you mean about metal housing? u mean the cage? normaly the cage originaly stay insite the pc case, yes you just snap into the cage and will held together them self becoz H60 size is completed fit this cage. hope this anser will assist you.
@@ironytech3443 oh cool! Thank you! That is exactly what I was trying to say, well Im glad to hear that then!
Cheers!
Did you replace the Front fan? Is it still loud? would you suggest to do so?
I didn't replace front fan yet, and fan noise is acceptable as long as you fixed fan RMP around under 30%? will be good.
Easy question, is removal of the top panel necessary? I have the exact same pc air cooled and i think i should just put this corsair h60 on it.
No, Not necessary remove top panel. absolutley you can install the radiator from chassis inside without remove panel.
Hey, you should get the VRM heatsink too because of the liquid cooling
Where can we order that heat sink? Not sure which one will fit.
@@skywalkerpj563 Need to contact dell customer service / sales to buy it. It’s currently out if stock for the r10 though
Should we? coz i don't think the VRM related with liqid cooling, excep you gonna overclock extremly for CPU?
Hello again Brother, do you have any USB Switch on you’re Alienware Aurora Motherboard, thanks Brother, Mohammed.
I have a ryzen 7 3700x. Will the h60 be able to cool the CPU?
can you install a second fan with the Y splitter with the H60’s ? Or just the Alienware one as I’ve seen you can do a double fan
I don’t think so. I installed one h60 to replace top fan as well as cpu fan only. There is no space install scone fan to there.
@@ironytech3443 actually I made a sandwich with two ml120 pro and h60 in my R11. Honestly not much different
@@xyt0435 You mean different with original Air cooler? or difference with one or two liquide fans? but i believe it will be difference with original air cooler, but for sandwich might be same what you say.
Can you add another Corsair ML120 Pro fan on the other side of the AIO?
You mean for the sanwitch of fans for radiator? yes, it is, no problem bro.
2 questions.1. is this pc your doing this on a r10 or 12 and 2. Is it okay to have the cooler ass backwards like you had it or is it not a big deal
My PC is R10, but i believe R11 is same chassi as well, but i don't know about R12.
Don't understand your 2nd questions exactly, Soory
@@ironytech3443 I have a 10. But my second question was it it okay to put the cooler upside down like you had it
@@ironytech3443 do I only need to buy thermal paste and the cooler?
In 7:22 how is it that you’re having the fan and radiator stay to the top? When I follow what you did exactly that part is loose and falls down if I move it too much. Is there something you screwed to keep the radiator and fan connected to the cage for the top area of the Alienware?
It weired, Are you sure you use the H60 Liquid Cooler? No i don't have any Screwed to keep radiator coz it is completely tiet into the cage then i don't need crew that, however if your radiator really loose from top cage, you have use extra 4 crew to fix radiator with cage after remove top cover.
@@ironytech3443 ye I’m positive, it’s the same exact thing as I’m seeing in the video. It’s not loose but if I did, just a tug of the radiator and it moves down a bit. Right now it’s staying still at the top. I’m just scared it may fall down while inside
@@ancianooo17 So i recommend screwed use the extra 4 screw to fix your radiator into the cage from top, this is just in case prevent radiator drop down future.
Has the Corsair H60 better temps/noise than the alienware watercooling solution ? Thanks
Well, I am sorry to say that i don't have the oringinal watercooler to compare with this corsair H60, but I think if you ordered opntion watercooler from factory you don't need to change H60 coz if you think fan loud? you just turn down the fans speed to low is ok.
Did you have any problems when you started the pc? I’ve seen where the pc is very picky about what fans you use. Please reply
What you mean, you mean such as error message or warnings when started PC?
@@ironytech3443 yes I’ve seen other vids where they put in a different fan and it gives them a error and it doesn’t work
@@julianakers390 Well, As my experience, when i connect liquid cooler to the AIO port of motherboard will warning not be able to pass when started with error message, Make sure connect H60 to the Top fan port of mother except you use orginal liquid cooler.
@@ironytech3443 ok thanks you so much
Is there a spécific sata power cable or i cannuse every satapower in the computer ?
All sata power cable type the same, so there is not special sata cable needed
I've had my Aurora R11 for two days. It's sad I'm having to find videos like this after dropping all that money, but it just overheats too much when I try to stream. Only when I try to stream. I can play my games, or do anything else on it all day with no problems at all, but when I try to stream it overheats to the point it just shuts my game off after 5 mins every single time. Pretty sad, and frustrating. Now I have to drop more money.
I would repaste the gpu before doing anything else that will drop the vram temps
@@orangejuicewithpulp403 Appreciate it, but I did go ahead, and buy this and put it in, and I have had no problems at all about it overheating since.
Just got R10 with rtx 3060ti with alienware 34inch curve monitors 120hz. im also upgrading to that cpu liquid cooler the stock sounds like a jet engine playing game😂.
Congratulations!, Should be jet engine but you can set RPM to quiet :), Don't worry
Hi I don't know if your still taking answering comments
I have a water cooler from factory.
I have just bought a H60 corsair water cooler, is it worth changing it? Is it more powerful? Or should I refund and swap the stock fans instead.
Thanks!
If you bought AIO water cooler with Desktop from factory then i don't recommend you to change H60I, coz stock water cooler will be powerfull thant H60I, excep very noise coz original water cooler can adjust fan speed. H60I Can't although it is very quiet. and if you bought stock air fans from factory like me, then for sure H60i much better. ^^
@@ironytech3443 thanks so much mate I am going to return it. You just saved me 70 pound
Honestly, I dont understand why Dell dont put their products on the market with a setup like this from the start and with fans that dont make a F-18 jet deafening sound…. People would pay for the difference for sure… Damn Dell!…
My question is how the hell do I secure this damn fan to the top of the aliwnware
hi man, just a question. can i also install corsair h60x instead of h60
Sure you can
Corsair Hydro Series H60i RGB Pro XT 120mm Liquid CPU Cooler will this fit for r10 ?
As long as 120mm size will fit this
Is the motherboard able to use the new 5000 ryzen series?
Official said will not be able to support 5000 CPU, but i don't think so, then i will test it once i got 5000 cpu soon
Does changing the cpu cooler voids your warranty?
Yes, should be, so u have install back to factory setting when u have to get warranty.
Do the R10 and R11 have the same exact case?
As i know totaly same
Hey do i have to put the thermal paste on for liquid cooler?
No bro, Normally put thermal paste on CPU, not on cooler. But do not paste a lot, just a little is ok. Recommend watching the TH-cam video how to paste thermal paste before u work.
@@ironytech3443 hey i did everything right I installed the Alienware liquid cooler and i turn pc on and im getting a flashing yellow light?
您好，感谢分享！我想请问一下，三明治效果如何？如果上面不要三明治只用一个风扇，是用原厂的还是用h60带的效果更好些？谢谢！
我没用过三明治，所以不好回答，如果不是三明治，最好用原厂风扇，因为可以调节风扇速度，降温效果更好
@@ironytech3443 谢谢回答！
Just did this and I'm getting Dell CPU Fan Error. Did you get the same?
Yeah, coz u connected fan power to the AIO pump port, choose other one will solve the problem.
hello did anyone actually try this? If so how difficult was the process?
Looking to replace this case with a corsair mid tower. I wonder if its possible?
well, why are you plan to change case? it should be ok coz the confirmation of motherboard almost same but i don't recommend. that is worthless.
@@ironytech3443 i just don't like the alien ware case. Im going for cosmetics & rgb etc.
@@bigabek1873 That's amzing project, but you had better changing case after warranty otherwise will not be able get it in case. I think not a big problem to change case.
Any way to get it to stop the supportassist pre boot system performance check? It takes a minute to scan and then says the cpu fan failed to respond correctly. I can continue from there and the computer works fine. Just annoying every time you start up having to wait
Idk if this is works? but you can try to check mark off go into the setting with automatically scan.
I'm wondering the same thing. I thought I did something wrong. What are your temps like and did you change case fans as well?
@@ObiJUANcanolli I pretty much tried everything, but it seems like unless you buy their heat sink and install it under the water cooler, it will just always give you that error. It takes 2 minutes to scan before it lets you thru to the boot up.
My Temps went down from high 80s to high 60s, I changed the case fans to the 120mm corsair ones too, but a few days later my PC bricked and I sent it back to dell. Don't think it was related to this, but I was relieved to send it back so I could get one with the right cooling system lol
@@Mustardhat this is no longer under warranty but I'm now worried i may face the same dilemma you went through. I went with noctua redux fans. I put the corsair fan aside.
That's funny you dropped from 80 to 60 because my temps were the same. I ran cinecench with stock cooler, 80-90. With h60 and noctuas I went no higher than 65.
Leaves me wondering what I might be able to get out of a small oc
@@ObiJUANcanolli I think changing the case fans is just for noise, the water cooler was the main thing that brought the Temps down. Honestly If I wasn't able to return it I would have probably just waited until I could afford a new setup and just take the graphics card from the alienware and sell the rest for parts. It stays hot because the case is shaped so strangely there isn't much room for ventilation, sadly they're one of the only options for pre-built that don't take months to arrive
can you link the water cooler link where you got it from? i just got the same pc and the temps are running really high
www.amazon.ca/gp/product/B079NXZQBC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Build*
Hey IonyTech Do you know how to fix boot failure on device? if so can you help me, i just bought the cpu cool, and it all goes fine but now this fail happens any advice on bios system and what to install o change?
What is the error message u see?
@@ironytech3443 Boot failure on device
@@MimiVRz Can u enter BIOS and c all system information? find what device missed
@@ironytech3443 The error message is Boot failure on device thats what it says on the screen
@@MimiVRz So you gonna try to get into the BIOS to c what happen
Is the H60 better than the one that Alienware offers because I got theirs liquid cooling and my GPU runs around 82C-84C kicking the fans very loud to reduce the temps cpu around 75ish when gaming high end games I’m thinking about replacing the fans as I’ve read they’re not very good . As they get very loud...
It is hard to say how big difference between H60 and Dell original liquid one, coz i didn't use original one. but as my experienced H60 is really quiet as well as i can't hear any noise of fan even kicking the fans run very quick with stress temp under 75c.
Would this be the same for the r12??
chassis should be same
I just installed my h60 power is ok pc is on everything plugged in just no display pc will turn on but no display I need help
well bro, need to check motherboard power cable and reseat it again.
Good morning Brother, great video, if you don’t mind and have a time then could you please do check this Corsair Fans information on their website and let me know, weather they would work on this Alienware Aurora R12, as I don’t know much, Also do make more videos on this Machine, really appreciate and many thanks Brother,
SKU CO-9050104-WW
Corsair iCUE QL120 RGB 120mm PWM White Fan - Triple Fan Kit with Lighting Node CORE Included.
Give your PC spectacular lighting from any angle with the CORSAIR iCUE QL120 RGB PWM White Triple Fan Kit, equipped with 102 individually addressable RGB LEDs - 34 in each fan - across four distinct light loops in a brilliant white housing.
No, This Fan kit u mentioned above that is no use to this PC, coz you don't have more extra power socket to let RGB fan controller use as well as fan kit
@@ironytech3443 Many thanks and really appreciate Brother.
Do I only need the h60 and some thermal paste
Also need driver?
@@ironytech3443 like a screw driver?
Is this the ryzen edition?
Yep
the installation was done wrong. You didn't install the VRM heatsink and didn't leave any space for it either
我啥同样的机型换完h60之后依然会飙到80度呀，一开始是65度左右，然后玩cod16半小时就到了80度，我用原厂风冷也不过85度，是散热器的问题么？求解答
三A游戏， 玩的时间久了确实会升到80，但是最多80了，不会再高，原厂风冷可以到90°或者以上了，而且会很吵，但是水冷会好些，这个貌似没办法的
还有一个办法是可以降压一点，我平时4.05频率给个1.1v的电压，温度又降了很多，而且性能没啥区别，也是一个办法，仅供参考，超频有风险，设置需谨慎。
@@ironytech3443 多谢up解答！我这几天还一直在尝试换猫扇nh-l9i，但是装不上🥲，我想知道这机箱会有风冷解决方案么？
@@user-ci7wp2si8e 这个目前没有风冷解决方案，因为上面有电源压着，根本装不了那些好点的风冷。 还有一个办法是，把现在的Cosaire水冷的风扇，换掉原厂Topfan，也就是说H60的水冷上面加原厂戴尔风扇，这样你是可以调节风扇的rpm，虽然会吵，但是也降低不少温度。
@@ironytech3443 okok，那我也这样试试，那剩下的这个贼船的风扇可以替换frontfan么
Did anyone get a cpu fan bios error when you load up your pc. I have a r11
It's weired, Are you sure the error get from CPU? not a AIO pump?
@@ironytech3443 no, I Just put the connector pin into the cpu fan socket pin rather than the pump socket. done stress test and the pump works fine being plugged into that
@@Elliott_03 Idk what kinds of error message you have, i don't have any error as long as you put connect pin into either top fan pin or CPU fan pin.
@@ironytech3443 yh I plugged it into the cpu fan socket and no longer getting the bio error screen 😀
@@ironytech3443 great video tho, really helped me out a lot 🙏🏼
60 is still high 50 is where they should be
My Bios was giving an error message after installed this on my R11.
U gonna connect liquid fan cable to the MB cpu fan port, don’t connect it to pump port, otherwise will give error
@@ironytech3443 thank you, I will try again.
@@YC305 NP, remember either upper fans port or cpu port whatever u wanna choose will works expect pump port.
@@ironytech3443 ok hopefully it works because is a pain in the butt to mount this thing.thanks again
wait a sec....you put the fan on the inside of the radiator..im seeing other people putting the fan on the top of the radiator where its at the top of the case...what is the difference?
I think it doesn't matter the fan placed inside or topside of radiator, but most impoertant that make sure the heat air must be absorbed from inside to out side for this case.
BTW, normally the people will install the fan to the outside or topside of radiator when you wanna absorbs new fresh air to the case inside.
You didnt bios error?
Yes I don’t. U might connect AIO pump port, that will have errors
@@ironytech3443 can I use noctua fans or does it have to me ml pro
Does this work for r12?
Update** it does work for the r12
@@theragekage5007 did u just install the consair h60 thats all?
Is this 120mm
Yes it is.
Good. I wait for love from you 💝💖
Thank you^^
6:41 min - When you do this effort you should have done a push-pull configuration like in this video: th-cam.com/video/tnt3u5SOSIk/w-d-xo.html
Yeah, Most important that you gonna be disconnected the CPU cable of Motherboard, then you will easy to install the radiator, outherwise wil stuck radiator when you are installing
Just built your own pc
Yeah, sure, but just this price is close to what i build myself and most important they have RTX3080 GPU
@@ironytech3443 same reason why I bough basically the same as you, 3700,32gb ram, rtx3080 and .... air cooling, I will switch to water cooling soon I guess.