I find this video, start watching, I pause one minute in, I reckon to myself "lemme just check the comments cos like i wanna make sure this is legit", then find 100% of the comments saying "thank you so much, works straight away", or, "dude you have just saved my old soundcard" and I look at that silver box lying there on my desk, with all its in and outs and midi and lots of gumption in the nice clean pres, and a little smile comes across my face - lol - thanks for the video bru, now i'm gonna watch the rest. Subbed.
You are a genius. How did you work all this out? I'm eternally grateful for this. Roland seems to have made it as hard as possible to install their discontinued products.
Two years on, I'm back to watch this again to set it up on another laptop. Thanks again for an excellent, clear guide that has kept this good old UA-25 running once more.
Fantastic! Tried everything but no luck until I found your video. How the hell did you figure out to use BOTH installs, both of which have NOTHING to do with Windows 10. Very cool.
Thanks a lot. I stopped at the operation on time mark 5:00 because my system said that the set up for the device was already done. Blue light for USB and Red light for Volume were switched on. No need to install the secund driver. Thanks a lot for your tuto. It was really help-full.
Finally I had to start again the process after changing hardware setup (Advanced on) and I followed it 'till the end. And it works correctly :) . I managed to connect the device to my DAW (CUBASE LE). But unfortunatly I noticed that my audio device was damaged. Volume OUT didn't work any more (red light off after a while). What a pity ! :( Physical damage or due to connection ? I don't know. Anyway your tuto is OK. Thanks for it.
You're my hero!! I rolled back from a free Win10 upgrade a few years ago because I couldn't get the UA-25 to work. Will now look into upgrading. Thanks a million brother!
Success, thanks. I purchased a used one, not knowing how old it was, very disappointed until I stumbled on this post, works like a charm now, and is a very nice unit.
Grrreat video. I really like this audiocard, and you now solved a big problem. Equipment being outdated like this one "was" is a widely experienced problem. Thank you so much!
Just bought new pc, new monitor and everything but Microsoft/Roland don't want me to use something more than 10 years old. Thanks very much for making this possible.
Amazing. I'd given up on getting my UA-25 to work with Windows 10. Now it works perfectly. Sadly, the same method doesn't work with my older UA-5. Still, I'm very happy with the result with the UA-25. Many thanks.
Brilliant! I've been through many other suggestions that involve mucking about with BIOS, suspending SafeBoot, and some even counsel that you may have to Factory Reset if things go wrong! This avoids all that; ingenious.
I don’t know how you figured this out, but thank you very much. A HUGE no thanks to Roland though. I can’t believe that they did not produce a driver for Windows 10.... will never support them again
BIG THANKS TO YOU !! The fix worked fine using the UA25 with FL Studio DAW / Win 10. Isn't it sad the makers of these devices (computers & interfaces etc.) don't inform their customers that a fix is possible. They just want you to dump expensive gear and buy new stuff all the time. Shame on them!!!
Thanks you so much! My PCR-M1 suddently kept turning off on its own after 10 seconds. Followed your approach and it works perfectly. Best wishes, mate!
Windows 10 bluescreened when I went to do the Vista install part. I uninstalled (the Win 8.1 uninstaller), restarted the PC, and repeated everything carefully - WITH THE UA-25 ADVANCE SWITCH ON - and everything worked as in the video. Please mention the ADVANCE switch ON, in your notes and video. Thanks very much for posting this solution.
TY so much for this, it was working fine this morning, switched some usb's around and i didn't work anymore, tried to reinstall but had the advance switch off... it was driving me crazy. For anyone who has issues, uninstall everything and try again with advance switch on ! Ty ty :)
Dude, you need to update the title of the video to: "How To Install Edirol UA-25 drivers On Windows 10 - 2019, OR ANY OTHER EDIROL DEVICE DRIVERS!" because, I just did exactly the same to my big Edirol PCR 300 Midi keyboard and am able to use it now with Win10, thanks to your wonderful instructional video. I just had to download the appropriate drivers! Thanx a lot!!
@@dumdumreviews7436 I don't know if you got what I was saying... I just wanted to point out that your method also works with other Edirol products that don't have a Win10 driver available, such as my Edirol Midi keyboard. Which is great! Thanx again.
Also works on the Edirol UA-5. Thank you so much for this! Edirol UA-5 uses the same method, except I used the Windows 7 (64-bit) and Windows 8 (64-bit) drivers.
Late to the party but this poster should have had a tip jar. I for one would have rewarded with more than just a 'thank you'. That there is a work-around that Roland failed to reveal has now made me a 'never buy Roland again'. I don't know where these companies get that they no longer have to care about the customer. Customer Service Index - 5/5 for this video. 0/5 for Rolland. Great fix, Dumdum Reviews!
This is awesome thank you very much, I just did the same with my old Digidesign cards that both Mac and Windows have deliberately cut from the supported device list even though they are class compliant devices, they both still work on Linux.
Maaaan you're great! Thanks a lot! Had some problems but finally when i did it exectly like You showed it, it worked. The moment of connecting the device is soooo important!
Great! Thanks for the guide. I have a couple of things to add; if you plug in the UA25 beforehand or have some old drivers half-installed, run the Windows 8 driver Uninstall before doing anything else and keep the UA25 unplugged. Also, when you plug it in, the Advance switch must be set to ON.
OKAY ....You are a Genius Sir !! Wow !! No BIOS had to be manipulated at ALL !! Will i have to do this on win 8.1 running 64bit ??? Probably is my guess ! Thank you and hoping this video gets at least 500 thousand view and likes !!!
How did you knew ..you needed the Vista x64 driver and not use the Win 7 driver ?? i guess that you can make a one solo druver out of these 2>drivers !!
This was really very helpful, I have been trying to do this for days ! this worked first time, you just have to get both the windows 8 and the vista driver first!
Muchas gracias por la claridad de la explicación y el resultado perfecto y sobre todo por tu voluntad de compartir y dar respuesta de alguna manera al abuso de Roland invitándonos a tirar a la basura nuestros equipos, que como queda demostrado, funcionan perfectamente. Saludos.
God bless you, i lost few years because I could not connect my Edirol to W10. Finally it seems working. These Roland morons did not release any driver for w10. You did helped me. Thank you,
Thank you! 😊 I followed your instructions for my new Windows 10 laptop three months ago and everything's still working 👍 Can I ask what is the music playing in the background? I quite like it! 🎹🎵🎶
The man who saved the UA-25 community, I'm just sad that I didn't get this video when I switched from Win7 to Win10. At that time the only way to make works the UA-25 was by disabling the advance mode on the back. There's only one problem, perhaps someone can help. With this workaround, when Cubase or Nuendo are opened, browser audio, spotify, winamp etc stops to works. thanks!
@@dumdumreviews7436 today I have found out and remembered at same time, that in cubase and so most likely other Steinberg softwares, if you click on "Device Setup", tick the box "Release Driver When Application in Background" in this way youtube, spotify, winamp will play and if you will open cubase, cubase itself will play the track. The only problem is that every time Cubase go in background it will stop to play, but for now in my case is enough, I can just start youtube or winamp and then bring on Cubase window. I believe that in the far past when I was doing audio editing, I had Cubase set on my UA-25 asio, while windows was using the Realtek drivers associated with the integrated audio card of my mobo. In that way it was possible play contemporary cubase and any other audio without interruption.
Thank you very much! It was easy to do and worked instantly! It´s a shame that good devices like this are supposed to have such a short livetime without a reason.
In a world where a piece of great equipment is obsolete too soon, you are a breath of fresh air. Thank you so much
I find this video, start watching, I pause one minute in, I reckon to myself "lemme just check the comments cos like i wanna make sure this is legit", then find 100% of the comments saying "thank you so much, works straight away", or, "dude you have just saved my old soundcard" and I look at that silver box lying there on my desk, with all its in and outs and midi and lots of gumption in the nice clean pres, and a little smile comes across my face - lol - thanks for the video bru, now i'm gonna watch the rest. Subbed.
You are a genius. How did you work all this out? I'm eternally grateful for this. Roland seems to have made it as hard as possible to install their discontinued products.
I wish I could buy you a beer my friend. You just brought music back to my office and a sense of complete calm. Can't thank ytou enough!!!
Two years on, I'm back to watch this again to set it up on another laptop. Thanks again for an excellent, clear guide that has kept this good old UA-25 running once more.
Fantastic! Tried everything but no luck until I found your video. How the hell did you figure out to use BOTH installs, both of which have NOTHING to do with Windows 10. Very cool.
Just done the same on my desk top that I've not wanted to upgrade to W10 for years because of the UA-25. Worked a treat, man your a genius, awesome!!
So many times people come with solutions that don,t work at all ,but thanks to you my UA-25 is working on Win 10. Many thanks!!
Thanks a lot. I stopped at the operation on time mark 5:00 because my system said that the set up for the device was already done. Blue light for USB and Red light for Volume were switched on. No need to install the secund driver. Thanks a lot for your tuto. It was really help-full.
Finally I had to start again the process after changing hardware setup (Advanced on) and I followed it 'till the end. And it works correctly :) . I managed to connect the device to my DAW (CUBASE LE). But unfortunatly I noticed that my audio device was damaged. Volume OUT didn't work any more (red light off after a while). What a pity ! :( Physical damage or due to connection ? I don't know. Anyway your tuto is OK. Thanks for it.
You're my hero!! I rolled back from a free Win10 upgrade a few years ago because I couldn't get the UA-25 to work. Will now look into upgrading. Thanks a million brother!
I can't thank you enough! I'm just dusting off this unit after many years. This was so simple. You were very clear!
Success, thanks. I purchased a used one, not knowing how old it was, very disappointed until I stumbled on this post, works like a charm now, and is a very nice unit.
This works for the EDIROL PCR controllers too! Great stuff. Many thanks for figuring this out.
I successfully got my UA-25 working on Windows 11 because of your great video. Thank you for your video and for your help.
I don't know how many times I have come back here to watch this...thanks once again.
IT WORKED!!! Had to try it a second time and couldn't believe it actually WORKED!!! THANK YOU SO MUCH!!!
Thaaaaanks a lot... I've been crazy looking for someone that explains me right for a long time! You're very good and clear!
Wow! Thank you very much. Your instruction is very clear! Now, I can use EA-25 even under Windows 10. I appreciate you so much!
i come back to this everytime i re-format my PC. thanks dude!
Grrreat video. I really like this audiocard, and you now solved a big problem. Equipment being outdated like this one "was" is a widely experienced problem. Thank you so much!
I was about to buy a new sound interface for my laptop, thought my old edirol was obsolete. Thank you very much for making me save money !
Just bought new pc, new monitor and everything but Microsoft/Roland don't want me to use something more than 10 years old. Thanks very much for making this possible.
The man is a genius!. Thank you so much. Now I can use my Edirol with Cubase on Windows 10.
Thank you so much!! Would never have got to get this to work without your video. Super, thank you!
Ive had my UA 25 for 15 years and was afraid to update thank you so much
This guy! Not only has he helped out of a spot twice, he says it at a pace where you can just do it as he says it, in one go. Yes!
Amazing. I'd given up on getting my UA-25 to work with Windows 10. Now it works perfectly. Sadly, the same method doesn't work with my older UA-5. Still, I'm very happy with the result with the UA-25. Many thanks.
yo do you have the cakewalk cds? I bought used, no cds argh I was hoping for cakewalk ffs
Brilliant! I've been through many other suggestions that involve mucking about with BIOS, suspending SafeBoot, and some even counsel that you may have to Factory Reset if things go wrong! This avoids all that; ingenious.
I don’t know how you figured this out, but thank you very much. A HUGE no thanks to Roland though. I can’t believe that they did not produce a driver for Windows 10.... will never support them again
This worked on my old Edirol um-1x usb to midi cable. I thought it was dead forever. Dude you are the best!
IT WORKED!! 😎This Just Saved My Life!!!!💪🏾
BIG THANKS TO YOU !! The fix worked fine using the UA25 with FL Studio DAW / Win 10. Isn't it sad the makers of these devices (computers & interfaces etc.) don't inform their customers that a fix is possible. They just want you to dump expensive gear and buy new stuff all the time. Shame on them!!!
Thank you so much! You saved a perfectly working piece of equipment. I wouldn't have been able to afford a new interface right now. Thank you!
Thanks you so much! My PCR-M1 suddently kept turning off on its own after 10 seconds. Followed your approach and it works perfectly. Best wishes, mate!
Windows 10 bluescreened when I went to do the Vista install part. I uninstalled (the Win 8.1 uninstaller), restarted the PC, and repeated everything carefully - WITH THE UA-25 ADVANCE SWITCH ON - and everything worked as in the video.
Please mention the ADVANCE switch ON, in your notes and video.
Thanks very much for posting this solution.
Same here..thanks for the heads up
TY so much for this, it was working fine this morning, switched some usb's around and i didn't work anymore, tried to reinstall but had the advance switch off... it was driving me crazy. For anyone who has issues, uninstall everything and try again with advance switch on ! Ty ty :)
Vielen Dank,das war die Rettung,um meine UA-25 weiter,auch unter W10 zu nutzten.
Thanks a lot man! I was looking for an answer for a long time! Great and useful video!
Wow.... you are the man. I just got my edirol ua 700 working with this method w7 and vista driver. Cant thank you enough👌🏽🙏🏽🙌🏾
Works beautifully thank you sir! (PS don't forget to set advanced to ON first)
THANK YOU for taking the time to make this video! Champion!!!
Dude, you need to update the title of the video to:
"How To Install Edirol UA-25 drivers On Windows 10 - 2019, OR ANY OTHER EDIROL DEVICE DRIVERS!"
because, I just did exactly the same to my big Edirol PCR 300 Midi keyboard and am able to use it now with Win10, thanks to your wonderful instructional video.
I just had to download the appropriate drivers!
Thanx a lot!!
But this video made n polished in August 2020 with the latest windows 10 in that time
@@dumdumreviews7436 I don't know if you got what I was saying...
I just wanted to point out that your method also works with other Edirol products that don't have a Win10 driver available, such as my Edirol Midi keyboard.
Which is great! Thanx again.
@@JaEuerMeister yes I got it. Thanks
Also works on the Edirol UA-5. Thank you so much for this! Edirol UA-5 uses the same method, except I used the Windows 7 (64-bit) and Windows 8 (64-bit) drivers.
So you downloaded the ua-5 win7 and win8 drivers or the ua-5 for win7 and 8? Please clarify. Thanks.
Bro you just saved my loved UA-25. I'm so thankful for your great Video.❤
Genius is not high enough praise for this, bro, you are a legend. Thank you so much.
Praise!!! 10 Years later and it still works on Windows 10 with your little hack. Who gave you this advice?
Thank you for uploading! Very happy to be able to use my UA-25 still!
Finally! All other methods didn't work but yours did. Thank you!
Just want to add my appreciation. This works like a charm. Thank you!
You are a dude. Thanks for posting.
Late to the party but this poster should have had a tip jar. I for one would have rewarded with more than just a 'thank you'. That there is a work-around that Roland failed to reveal has now made me a 'never buy Roland again'. I don't know where these companies get that they no longer have to care about the customer. Customer Service Index - 5/5 for this video. 0/5 for Rolland. Great fix, Dumdum Reviews!
I sold mine, bought Behringer Xr18 mixer/interface
Thank you so very much for creating this fabulous video, I am very grateful, I can still use my lovely UA25…..
Thank you 😊
This is awesome thank you very much, I just did the same with my old Digidesign cards that both Mac and Windows have deliberately cut from the supported device list even though they are class compliant devices, they both still work on Linux.
Thank you so much! I am bringing my UA-25 back to life again.
Bardzo dziękuję, super! Dzięki Tobie udało mi się zainstalować to urządzenie 💪 Dziękuję 🤘
Words cannot express how much this video helped me! Thanks a lot man!
Can't say how grateful I am for this clear instruction on how save your beloved gear! Thank you so much!
Worked on my Fujitsu laptop. Thanks for the tuorial.
Wow!!! Thank you so much. That was so easy and saved me from buying another soundcard.
Thanks so much, I love my ua25 and didnt wannahave to get a different interface. Thanks for the tutorial!
Awesome instructional video!! Worked perfectly with my recent Windows 10 upgrade. THANK YOU, THANK YOU!!
Just worked for me on windows 11. Thanks for the tip.
Amazing! Thanks so much for this, every step worked EXACTLY as in your video. Including the magical moment when the lights came on on the device!
great video, helped so quickly...thanx bro...greetings from Berlin/Germany...rock on...
Thank's a lot, you saved me from a nervous breakdown.
Awesome, had trouble installing this in the past. Who would have thought of this lmao
Thanks, This is working also for the UA 24 with the UA- 24 Windows 7 64 driver and the windows vista driver.
I tried on windows 11 and it runs.. great man
Excelent advice, clearly explained. Keep doing what you are doing - it is working! Thanks!
Maaaan you're great! Thanks a lot! Had some problems but finally when i did it exectly like You showed it, it worked. The moment of connecting the device is soooo important!
Great! Thanks for the guide. I have a couple of things to add; if you plug in the UA25 beforehand or have some old drivers half-installed, run the Windows 8 driver Uninstall before doing anything else and keep the UA25 unplugged. Also, when you plug it in, the Advance switch must be set to ON.
I sold mine n bought Behringer Xr18. And I'm using it on Mac and Linux no driver needs.
OKAY ....You are a Genius Sir !!
Wow !! No BIOS had to be manipulated at ALL !!
Will i have to do this on win 8.1 running 64bit ???
Probably is my guess !
Thank you and hoping this video gets at least 500 thousand view and likes !!!
How did you knew ..you needed the Vista x64 driver and not use the Win 7 driver ??
i guess that you can make a one solo druver out of these 2>drivers !!
I was about to throw away the UA-25. You saved a life... :)
It worked! You sir, are a God among men! Somebody buy this man a horse. Amazing.
Just adding my appreciation for this solution. You’re a star, thank you!
Spot on works for me
Dear Sir, you are a genius and a true hero. Thank you very much.
Perfect, me Edirol UA20 works ! Wow! Thanks you!
Thank you. Just picked up one for cheap, will be connecting that to my MT-32 later....
This was really very helpful, I have been trying to do this for days ! this worked first time, you just have to get both the windows 8 and the vista driver first!
Wow it’s tre same instructions for Edirol UA-20 with Windows 10…!!! TNX
Thank you for this! And I can confirm this also works for Windows11.
Thanks!! I prepare my "voyage" 7 to 10... Excellent tutorial!!
Muchas gracias por la claridad de la explicación y el resultado perfecto y sobre todo por tu voluntad de compartir y dar respuesta de alguna manera al abuso de Roland invitándonos a tirar a la basura nuestros equipos, que como queda demostrado, funcionan perfectamente. Saludos.
Excellent - who knew?! Thanks for this - my UA25 lives again!
Thx a lot man . I follow the procedure and it works for my Um880 midi interface under win 11!!! Thx again!
You are a prince among men .. such great instructions !!
Working on Windows 11. Thanks bro. Thanks. Had to say it twice.
God bless you, i lost few years because I could not connect my Edirol to W10. Finally it seems working. These Roland morons did not release any driver for w10. You did helped me. Thank you,
Genius solution. You saved my Edirol. Thanks!
Others out here are suggesting changing bios to accept a dubious patch.
Changing the bios is a big risk in my opinion 🤔
@@dumdumreviews7436 Wouldn't risk my computer doing that- That's why I was so happy finding your solution
Thank you so much, man! It worked! :D
thank you so much for this explenation!!!! it worked :-) I can't believe it :-D
Awesome video and accent, thanks mate!
Rise from your grave! Thank you for keeping old tech alive! This is why I love the internet... amazing people like this doing a good thing.
Thank you!! Saved me a lot of time and headaches!
Hello from 2022. Though I'd love to know how all this works... for now, I'll just say thank you. ressurected my old interface!
I don't have the interface anymore, but I think it should work on windows 11 too, 🤔
Amazing...thanks. Saved my UA25
Thank you! 😊 I followed your instructions for my new Windows 10 laptop three months ago and everything's still working 👍 Can I ask what is the music playing in the background? I quite like it! 🎹🎵🎶
you're in my top 10 best human beings
This is awesome! Just installed drivers for win11. Thanks!
Fantastic workaround and clearly explained. Thank you :-)
The man who saved the UA-25 community, I'm just sad that I didn't get this video when I switched from Win7 to Win10. At that time the only way to make works the UA-25 was by disabling the advance mode on the back.
There's only one problem, perhaps someone can help. With this workaround, when Cubase or Nuendo are opened, browser audio, spotify, winamp etc stops to works. thanks!
I don't have that card anymore, but I have the same issue with my m-audio card
@@dumdumreviews7436 today I have found out and remembered at same time, that in cubase and so most likely other Steinberg softwares, if you click on "Device Setup", tick the box "Release Driver When Application in Background" in this way youtube, spotify, winamp will play and if you will open cubase, cubase itself will play the track.
The only problem is that every time Cubase go in background it will stop to play, but for now in my case is enough, I can just start youtube or winamp and then bring on Cubase window.
I believe that in the far past when I was doing audio editing, I had Cubase set on my UA-25 asio, while windows was using the Realtek drivers associated with the integrated audio card of my mobo.
In that way it was possible play contemporary cubase and any other audio without interruption.
Thank you very much! It was easy to do and worked instantly!
It´s a shame that good devices like this are supposed to have such a short livetime without a reason.