FINALLY! Hubitat Dashboard Drag and Drop - works like magic!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Drag & Drop on Hubitat Dashboards is Possible! Using this awesome community app (which is technically a driver) and a little bit of setup can ease the pain of arranging your Hubitat Elevation dashboards.
This has been tested on Hubitat c7 and Hubitat c8.
This app is best installed and maintained with the Hubitat Package Manager. There is a link below that describes HPM in more detail.
EZEEK FORMATTER WEBSITE (for Option 1)
tbiu.io/37Ne9NrB
LINK TO RAW JSON (for Option 2)
tbiu.io/fFmYQ82y
0:01 The Big Reveal
0:34 Things to know before you get started
1:08 Install Smartly Inject by Markus
2:17 Create the Virtual Device
3:06 Adding the Virtual Device to the Dashboard
4:14 Two Setup Options Explained
4:46 Pre-formatted Themes
5:05 How to Back Up your Hubitat Dashboard
8:21 Using existing layouts (Custom Themes)
13:04 More Live Event Info
These dashboard drag & drop instructions use code developed by a member of the Hubitat community. It's always a good idea to backup your hub before trying new things with community apps and drivers.
- test this out first on a test dashboard. If you have a Hubitat test hub, start there. Once you understand how this works, apply the concepts to your main hubs and dashboards.
- the instructions show you how to back up your Hubitat dashboards. Don't regret ignoring this advice!
🏅 Affiliate Product Links
❤️ Hubitat Elevation C-8 Home Automation Hub : tbiu.io/8sq37gid
🎞️ Useful Videos
Hubitat Elevation How To Dashboards & Devices Q&A : tbiu.io/bVBEQkSa
Is Hubitat Elevation a Good Wink Hub 2 Alternative? : tbiu.io/lgtJ9jgP
Hubitat Elevation C-8 Review - Smart Home Automation Hub [2023] : tbiu.io/WQRtoIiH
❤️ HUBITAT PACKAGE MANAGER - Install and Tutorial ❤️ : • MUST HAVE APP - Hubita...
How to Install User-Created Apps on your Hubitat Elevation hub [Hubitat Official] : tbiu.io/XZO3SIrk
🌎 Useful Websites
EZEEK FORMATTER WEBSITE : tbiu.io/37Ne9NrB
LINK TO RAW JSON : tbiu.io/fFmYQ82y
== DIY Smart Home Guy Websites ==
Our How-To Website : tbiu.io/mgXuyoSN
Support This Channel : Consider leaving a 'Thanks' donation to support the making of this and other videos.
DIY Smart Home Guy Featured Products : tbiu.io/j0srj4um
Facebook : tbiu.io/Kj3kMyqD
Twitter : tbiu.io/VeMwOGI3
DIY Smart Home Guy creates how-to videos for smart home automation centered around Z-Wave and Zigbee devices. Review videos are generally centered around Hubitat Elevation, SmartThings and Vera. I personally run Hubitat as my primary smart hub, however I do test products on the hubs mentioned. I understand that a home automation hub is not a path for everyone. I chose this path because I am a firm believer is advanced automation and local control.
#DIYSmartHomeGuy #SmartHome #HomeAutomation
![Hubitat Elevation C-8 Review - Smart Home Automation Hub [2023]](http://i.ytimg.com/vi/Edqc43j_N0s/mqdefault.jpg)
UPDATE FOR HUBITAT C-5 USERS
I've de-mothballed by C-5. For me, Option 1 (ezeek) does not work, but Option 2 (manually injecting the code into the JSON) does work.
If you're reporting a problem, please let me know which OS you are using (Windows, iOS, or Android), and the Browser. This will allow for more testing.
Here is a link to the community discussion. community.hubitat.com/t/smartly-inject/123049/10?u=diysmarthomeguy
You got a new follower!!! Thanks so much for the great tutorial! Looking forward to my Hibitat Journey now! Hopefully they will bake this into hubitat eventually.
Thanks Ted. Glad we hit the sweet spot with this one!
Thanks so much. First method did not work for me as paw did not appear and button remained. Second works like a charm!
Glad it helped!
Very well explained. Thanks alot
You’re welcome. Glad it helped!
OMG ! You rock !
Does this work with the c-8 ?
Thanks! It sure does.
I've actually used this for the last year +.
Good to know. It was a well guarded ssecret as far as I could tell. Thanks for the information. Cheers
@@DIYSmartHomeGuy1 seems it was backed or bought out something happened early on in the implementation and was charging some fee but mine has continued to work all this time some hiccups here and there but definitely a game changer.
Thanks. I saw there was a period of inactivity and then it looked like a member of the Hubitat community picked it up and is supporting it. Enough so that I was brave enough to make a video on it LOL
@@DIYSmartHomeGuy1Glad you did. I'm deep into HE DB app dev and never once heard about this.
There is no paw to click 😞
HELP! Your steps are amazing! I was tracking with you perfectly until 8:00. When I selected Drag and Drop, then Attribute, then Javascript then Add Tile. My little tile gets added but does NOT disappear, and I get no paw! This is a brand-new install for me. I am on a PC and I am running the latest version of the app. Any ideas?
I have a couple of dashboards with battery widgets that do that. Do you have any batteries on the dashboard. If not, tell me what widget types you have and I’ll try to replicate.
@@DIYSmartHomeGuy1 I am just starting out so I only have (2) Kwikset locks, something called "Day" and my phone. I got it working using method 2 and actually, I think Method 2 is easier! I subscribed and look forward to more content from you.
Everything is good until 7:38, but then the the small "Drag and Drop" tile appears, but does not disappear and there is no paw in the upper right. I'm using Safari 16.6 on Mac, would that matter?
It took a while to figure out on my setup. Battery widgets seems to break it. There may be others also. You can try changing certain widgets to see if that fixes.
@@DIYSmartHomeGuy1 Thanks for the reply. But I have no widgets installed. This was actually one of the first things I installed on my new Hubitat C8. I am starting to move to Hubitat from my VeraPlus, and man, I am going to miss the HomeWave iOS app for Vera (by Ronald In 't Velt). I use this app everyday, amazing. Love it. Trying to make a similar "Dashboard" for my iPhone with the stock Dashboard maker for Hubitat (I've given up on Drag n' Drop). Not the worst thing (now that I made the buttons smaller), but I can see I'll miss the HomeWave app.
OMG! Clunky to get established but how is not a feature directly built in. Honestly the only reason I don't suggest Hubitat when people ask for suggestions on a smart home hub is due to the dashboard. This is amazing!
OMG is right. Clunky is right. Amazing is spot on! Cheers
Yes, yes. I've been complaining that the Dashboard creation tools are SOO primitive and the dashboard is the FACE of the product.. If they spent one day upgrading it many people would be happier. CLUNKY, CLUNKY!
I see in Hubitat forum others have seen your video and are now trying to get to work and they are having the same issue as me ?
I've de-mothballed by C-5. For me, Option 1 (ezeek) does not work, but Option 2 (manually injecting the code into the JSON) does work. Here is a link to the community discussion. community.hubitat.com/t/smartly-inject/123049/10?u=diysmarthomeguy
I'm using a C8 at the same version as you, but I never get the paw or check mark. I've tried it 3 times just to make sure I'm doing everything as you did, yet it doesn't work. Any thoughts? Only tried Option 1
I'd try option 2 just to see what's up. C-5 users are always reporting problems with Option 1, not sure if they are related.
sorry mis-spoke, the check mark is their but the paw doesn't appear and the "Drag and Drop" tile doesn't go away
Option 2 worked, but I'd still like to figure out why Option 1 didn't. I'm on a C8 with the same version / current version you had in video... Thanks this is awesome
@@DIYSmartHomeGuy1
There should be three factors that influence this working or not. Browser, JavaScript security settings, and OS. Operating system being the least likely. I use Chrome (mostly) and will test this in FF. Will post if I figure something out.
@@DIYSmartHomeGuy1
Any update on getting the paw to appear with option I ? I am on the C8
interesting when the JavaScript icon is added it does not go away? Not working could it be because I am running a newer version of hubitat ?
What version are you running?
@@DIYSmartHomeGuy1 strange when I add virtual device. Under current status Javascript enabled it has a broken graphic image like something is missing. Your video of this screen is hard to read.
I get the broken image as well. Do you have the text in the Drag and Drop button that says "Enabled"?
I've de-mothballed by C-5. For me, Option 1 (ezeek) does not work, but Option 2 (manually injecting the code into the JSON) does work. Here is a link to the community discussion. community.hubitat.com/t/smartly-inject/123049/10?u=diysmarthomeguy
This mostly doesn't work as expected. C-8 on the BETA, Win10, Chrome. No "paw" using option 1. I see the smartly community forum hasn't had a single post since Feb 23.
There are some flaws for sure. Check the pinned comment - when I find things that make it not work, I put the solution there. I have found that any dashboard with a Battery tile doesn't work.
@@DIYSmartHomeGuy1 All my motion sensors are set to motion on the dashboard but when I try to se this up, they all show battery and this doesn't work. It had promise but this cripples widespread use.
I'm on a C7 and I can't get it to work. I get a small square device that says Javascript Enabled. Would love to get this to work as I've completely given up on the Hubitat dashboard and relied on iOS Home to take care of it.
Ok option 2 worked.
What browser are you using?
@@DIYSmartHomeGuy1 Firefox
There should be three factors that influence this working or not. Browser, JavaScript security settings, and OS. Operating system being the least likely. I use Chrome (mostly) and will test this in FF. Will post if I figure something out.
Just tried it in Chrome. Still doesn't work.@@DIYSmartHomeGuy1
Anyone have this working on a C5 hub? The "paw" never shows after adding the smartly inject virtual drive (with the attribute javascript).
Same in my Hub.. And drag and drop tile stays visible
I've de-mothballed by C-5. For me, Option 1 (ezeek) does not work, but Option 2 (manually injecting the code into the JSON) does work. Here is a link to the community discussion. community.hubitat.com/t/smartly-inject/123049/10?u=diysmarthomeguy
Very cool
right?
Hi Guy! Curious if you're up for a consulting gig. We're in the process of building something that I'd like to get integrated together, locally controlled.
Send me your email address
I do not get the the icon in the top by setting etc just a drag and drop tile?
a few people are mentioning that. It seems isolated to the Option 1 (using Ezeek format). Did you try option 2?
option 1 ... I signed up for your channel. could I pay you to set up a jason file for me? My 75 year old brain can't get this stuff easily.@@DIYSmartHomeGuy1
I guess not eh?
10th try I got it with option #2
I found a dashboard with the Battery template (from a battery operated motion sensor) that did not get the paw. I suspect there may be certain templates that funk up the process.
What Hub Hardware are you running ? C-5 C-7 C-8?
I'm using the a C-7 and a C-8
How come Hubitat don’t install in an update, it would be nice to addition
I've been asking that question for over 5 years
Deberia darle pena a la gente de Hubitat que la comunidad este haciendo estos avances, hubitat es muy bueno a nivel de programacion pero los tablero son una real porqueria, no se que le cuesta poner unos desarrolladores web.
Por favor, perdóname si mi español es malo.
A lo largo de los años ha habido muchas quejas sobre los tableros. Mejorarlos solo haría que el producto se vendiera mejor. No está claro por qué Hubitat no les presta atención. Estoy feliz de que la comunidad haga esto. ¡Gracias por compartir!
@@DIYSmartHomeGuy1 gracias por responder y en español, no hacía falta porque usaba el traductor. Así como comentaste no entendemos porque no avanzan en eso, hasta sonoff con su Ihost tiene una mejor interface. Yo tengo mi empresa de casa inteligente y estoy implementado Hubitat en mis proyecto, ha sido una montaña rusa y de verdad que gracias a la comunidad es que uno saca esto adelante. Mi elección de Hubitat es porque es un sistema fácil de configurar , es local y el costo es menor y es lo que le ofrezco a los clientes sin quebrarle el bolsillo con control 4 o algo similar.