How to change tablet Touch Screen

In today's video we'll show you how to change the touch screen of a tablet step by step.
This model is from a Samsung Galaxy Tab, but it works exactly the same for any tablet (Huawei, BQ Edison, Lenovo, Google Nexus) as they are all very similar.
In the case of the iPad is quite different so we will dedicate another video.
The steps are very simple:
1- Peel off the broken screen.
2- Disconnect the cable and clean the screen well.
3- Connect the new screen.
4- Place the new adhesive tape and stick it.
The first step is to peel off the broken screen.
For this we will use a special plastic spike that usually comes with the new screen. We can also use any other fine plastic item such as a credit card.
We remove the tablet from the case and unplug the flat cable from the screen, which in this case was broken when we took it out.
The flat cable is fitted with a safety catch. We simply lifted the tab and pulled the cable out.
Then we cleaned everything well from the remaining glass and the adhesive tape of the old screen. We proceed to install the new screen.
In order to install the new screen, we first remove the protective film and stick the screen. We have to be careful in case we have any buttons as it is the beginning.
The next step is to connect the flat cable of the screen to the board and finally to place the case.
If you liked the video don't forget: Give it a like and subscribe to the channel.