Restoration The Rusty Large Table Drill // Completely Restoring the Table Drill Electric Motor
ฝัง
- เผยแพร่เมื่อ 24 ธ.ค. 2021
- Restoration The Rusty Large Table Drill // Completely Restoring the Table Drill Electric Motor
Video drill press disassembly & assembly. I hope you find something useful from this video! I am very happy to receive your feedback, advice, suggestions to improve myself. !!! I made this video just out of curiosity and challenge, so please accept my apologies if I made a mistake during this restore!!! -------------- Thanks a lot for Like & Comment ----
This press has worked like a charm for my projects th-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
Em cứ tưởng anh là người nước ngoài chứ :>
لا إله إلا الله وحده لا شريك له له الملك وله الحمد وهو على كل شيء قدير 🌷
Beautiful work indeed!
Thank you 🙏🏼
Omg watching him beat on the new bearings did it for me.
Thanks, the best restoration videos always have the restorers wearing black gloves.
And that’s how Harbor Freight drill presses are made….
The good:
-Great use of the lathe, I really liked the job you did on the handle.
Sources for improvement:
-Don't hammer the outer rim of a bearing.
-Don't paint the upright of the stand, it restricts movement.
-Don't paint the table top.
-Give yourself a little more length on the crank arm for better control of table movement.
-Spend some time practicing welding before the restoration, the crank and the table could have looked better.
SALUT PRIETENE OK FELICITĂRI.
Why was the column painted? It should be smooth and clean! The pulley grooves do not need to be painted either! New bearings are damaged by hammering. A typical example of working in China
And both of tables should be clean too.
Вы большой молодец. Удачи и здоровья Вам!
Parçaların pasını güzelce temizlemek yerine hafif bir dokunuştan sonra özerine boya çekmek iyi olmamış biraz daha dikkatli ve özenli yapılması gerekiyor ama işin sonunda çok güzel bir çalışma olmuş ❤
Good hit 👍🏻👍🏻 🇮🇳 || Kuki
Ur contents project work is full of drills . restore any stuff that comes in ur mind .. maybe u can ask ur fan's ..to suggest any stuff for restoration
Very nice sure hell for stout I wonder how old it is very well made
I like ........ the most used precision tools, hammer and cold cutter. Good luck with that restoration.-
Effective but a bit rough and ready; recovered/repaired rather than restored. Better than scrapping it, at least it lives on to fight another day.
Điện cơ hàng việt nam 🤣
Why paint parts right over rust and cavities?
nice job well done
Руки бы оторвать за такую работу, можно было пескоструем очистить.
Надо сначала руки ему отпескоструить, а потом столик, который он на какой-то хер покрасил! Типичный вср*тый "реставратор".
Вообще... Не реставрация это! Не почистил нормально, не убрал косяки, собрал на старые и грязные болты, испортил гайку с левой резьбой... Ужасная работа!
Теперь это можно выставить на Али экспресс))))
Nice restoration - thanks for the video. A couple items: 1) use wire nuts for bringing wires together 2) Don't paint the post and table and 3) it would have been really great to weld all of the holes in the table then MACHINE them flat and rebuild the circular grooves in the table to give you a perfectly flat table.
One other item. The table height crank. If you don't need to or cannot take it apart, don't. If you have to do a terrible looking repair to reassemble it. Don't take it apart.
beautiful job-greetings and invite you to yourself
Great video
You did a fine job or restoring the drill press, except for one small method that you should not do. That is hammering on a ball bearing outer cone. You should only apply pressure or hammer blows to the center cone that is in contact with the shaft. Transversely, when inserting a bearing that is a press fit, apply pressure or light hammer blows to the outer race evenly. Use a pipe, socket, lathe turned scrap piece, or other appropriately sized metal to effect the installs.
^
What about hammering cast iron during dismantling?
@@teacheme Only gently if you do not want it to crack. Treat it as tough glass.
A few mistakes as mentioned, but its a drill press and it works, looks better than it did, and the important thing it was nor thrown away in the scrap..
Hooola como estas ? Saludos desde Chile deberas traducir ... Tu canal es Japones o Chino?
Muito bom Campina e
Mm mm mm. Had some things to say about this restoration process. But read a lot of the comments below first. These guys pretty much covered it all. You’ve got some learnin’ to do before your next project. Good luck.
Trochę więcej respektu i delikatności, a nie walenie młotkiem. 🙄
Czego oczekujesz od gościa, który nabija łożyska kulkowe młotkiem, maluje elementy precyzyjne trzema warstwami farby i zostawia nieobrobione napawane gluty w stole?
As long as it works! 👍🏽👍🏽
Do not trust someone who speaks beautifully, there is always a game in his words. Trust the one who silently does beautiful things.
You came to watch the wrong video then. 🤣
Right
espectacular, saludos desde Argentina, Buenos Aires.
That's some brilliant workman shoes you're wearing there boy! I wonder where you got them, haven't seen those since the early 60's 😂
Он реставрировал туфли деда.
so cool.
روعة BRAVO
i wish i still had my drill press
magnifique restauration
THANKIOU
I see you got a lot of comments. One thing that I take issue of is the electrical connections. It seems you just twisted the wires and then applied black tape. That tape will loosen and now bare wires are able to touch the frame. To me this and hammering the bearings on the shaft was the big problem with the rebuild.
Napierdala młotkiem gdzie popadnie, śruby już chyba wcześniej odkręcone, bo w impakcie młotek nawet przeskoku nie zrobił, gdzie normalnie zaciskając nasadkę ręką zacznie stukać. Zresztą psika tym gównem po łbach śrub, które daje tyle, co nic. Zastanawiam się po jakiego grzyba on pomalował koła pasowe... i w ogóle części pasowane na dokładny wymiar, skoro to wszystko potem zdarł, a łożysk zakładanie młotkiem to już przesada. Połączenia elektryczne... miejmy nadzieję, że nikogo nie zabije ta maszyna. Wyosiowanie silnika, jak i ustawienie paska w linii prostej to mistrzostwo. To się nawet na olyiks nie nadaje xD Sądziłem, że coś lepszego zobaczę, ten sprzęt nie zasługuje, żeby taki ktoś go "regenerował". I to mi jutub polecił?
đại ca là người việt nam à?
Don't you find it distracting to have Alvin and the Chipmunks fighting in the background?
El terminado da un poco de desear
Pero muy bien restaurado
I love your shirt. You should not be wearing it for the restoration!.
Nice restoration!👍
Painting all the machined mating surfaces was a bad idea.
The scrubbing and brushing of first and loose rust was so satisfying. Wished you showed it all 😍
Siempre digo que lo fundamental, es primero, aprender a desarmar algo, y eso no es solo sacar tornillos. Desarmar prolijo y bien, es otra cosa. Después viene el armado que también tiene sus cuidados. Pero bueno...no ha quedado tan mal y funciona!
Agregarle que, hay muchas partes que se deben lijar, para mejor acabado y además algunas partes no se deben pintar, ya que dificulta embonar las piezas, así que la restauración quedó medio hecha y funcional.
If it works what matters what painted
U have done Incredible job bro
Super restoration mécanique, pourtant, mais la petite partie électrique qu'il y avait sur le moteur ! épissures et scotch comme début 19cent !! L'électricien que je suis n'en crois pas ses yeux...
Should have polished the vertical post. Not painting it. Would slide better.
Great job my friend! Thanks for sharing! 👏🏻👏🏻👌🏻🤙🏻🤙🏻🤙🏻🇺🇸✌🏻
лайк за труды🙃🙃🙃
За тяп ляп?
It is better to buy some good tools and use them instead opening nuts by hammer. If you use hammer never metal with metal. WD40 needs min 1 min to get an effect. Warm up metal will help you to get loose. You need to improve your skill otherwise you remain a cleaner
I love your work may I suggest look at rusteloum Hammerite paint or others give the machinery a great look I did my truck compressor with the green with the Honda red engine
@John Doe no john just like to pull up to the job looking professional
It lives to drill more holes for another 40 years.
Very Nice presentation of restoration of manual column drill machine. All process steps are interested from start to the end. Although, there are unnecessary extra work done which were not required but it is ignorable. 👌👌👍👍
Сколько дней шло восстановление?
Это не восстановление. Это помыл покрасил.
Excellent job 👍
Widzę błędy! Mianowicie - Koła pasowe, półka i podstawa w części przeznaczonej pod imadło wzorcarskie nie powinny być malowane.
It looks great and you did a wonderful job restoring it as well!!!!
Enjoyed the video and I gave it a Thumbs Up
Great restoration ♪
Что же ты шкив разбил достукался своим молоточком , я так и знал что этим кончится.
Masz rację, Siergiej.
Это на 9:27 ?
В принципе он все сделал по принципу "покрасить и выкинуть"... можно было даже не разбирать....
Very nice work
Do not strike the ball bearings. It gets pitt on the stock tracks. ball bearings must be pressed on the shaft. If you have to hit, do it only on the inner track.🙂
use ferules for the cables.
Il y a peut être un manque de moyen, que l'on peu comprendre. Mais il y a aussi un manque flagrant de compétences.
On ne peint pas les parties mobiles de ce genre d'outils.
Anyone else here horrified at the stupid way he hammered in those new bearings?
Когда я увидел провода на скрутках, то просто на пол лёг, чтоб не упасть.
What was the undercoat colour, it wasn't grey - it was a nice colour 18:29
For a back yard restoration I don’t think it’s that bad. I mean it’s not a true restoration but Hey as long as it works.
Very nice work!!
PAINT ALL THE THINGS!!! 🎭🎨
А почему патрон не покрасили?
И подшипники....
Why on earth would you paint the column?
It is soo nice..super 👍👍👍
it's a good restoration but you screwed up the paint and you should have used the hammer less
After long hours of work, the result is surprising! Well done! Good job! 👍👍👏
Very good job mash'Allah but you haven't tested the engine
How long did it take to restore the drill press o
Meia-boca!!!😂😂😂😂😂
What grinding wheel did you use.
I love how you restore things to look brand new. I would love to see you restore an old rusty sewing machine. I've seen some. They don't meet your standards.
Rose Echols, Visiblement tu n'as aucune notion de mécanique pour apprécier le travail de sagouin de ce type ! 👎🏻 👎🏻
They must be terrible if their standards are lower than this clown.
The wiring was a bit frightening for me
Why would you paint the pulleys. When they heat up its just gonna melt the paint and start shipping.
Wow, amazing how easily you were able to take the drill press apart. I thought it would never come apart, from all the rust.
Andarilho..
Poco delicado el plato no hay que pintarlo no ha pulido nada teniendo tornó y desmontando a golpes teniendo aflojalotodo
These pcs needed bead blasting not a wire wheel, this is no more than a lousy paint job because the metal didnt get clean.
Me causa mucha atencion en el proceso has utilizado mesios mecanicos para sacar el oxido sin productos quimicos ... Me parece muy bien
Holy shit hitting a new bearing with a hammer 🤦🏻♂️ use a socket or something that bearing is now fucked
Putz.... Ele pintou a mesa e a coluna. Eu teria colocado um capacitor novo e não usaria fita isolante.
Años ~50...
Maravilha muito bom
У М Н И Ц А ! ! !
В каком месте ? А там где подшипники молотком насаживает наверно 😅
Incredible work 👏 🙌
Incredible fuck up you mean. 😄
This is not a very old Chinese machine. It is of little value. Column made of thin-walled pipe, the base is thin and light. Don't waste time restoring it.
You should never strike a hammer with another hammer. Step one should always be safety. I do have a bit of a problem with “full restoration” in the title. It looks and functions better, but it is far from a full restoration.
There are so many "fake" restorations. It's nice to see something lije this! Good work!
It hurt's watching it as a Machinist