Those skills are literally the basic skills of lathe work. Centering a piece and using a boring bar. The welding sucked ass. Id expect a 16-18 shop apprentice to know the same skills
I enjoy watching these videos, the machining and craftsmanship is just amazing and it's done with old antiquated machines, it's shows the talent of these men.
Quand on voit le matériel dont il dispose,on ne peut être qu'admiratif.Il n'a qu'un tour traditionnel et fait un travail formidable.Je suis moi même un tourneur sur métaux en retraite.Chapeau , l' ami.t'es un bon.
@@boldee101 Tell us about your machining skills then? What type of dissimiliar metals is this man working with that would pose a problem for welding? What type of rod should be used for this? How many years have you worked on a metal lathe?
@@tabcreedence6553 45 years as a machinist working all manner of machines including manual lathes in industry and research, 25 years in space research having the honour to work on a number of ground breaking projects including instruments for the James Webb Space Telescope, I have things I have made orbiting Earth, Mercury, Mars and on the surface of Mars, I have also worked on instruments that are currently being used in the early detection of cancer, so there are my qualifications to be critical. Do you think our friend knows about the properties of the materials being used here and there compatibility? Do you think he even considered there compatibility beyond them both being ferrous materials? Do you think he ascertained the fatigue levels in the components being repaired and how safe it would be to repair? What about the longevity of the repair? My guess would be that we are looking at a very old fatigued component made of cast steel so he could probably us any old welding rod he gets hold of, I doubt very much that he has a lot of choice or even knows their constituents. Where they guy excels is the ingenuity of the repair, he isn't a good machinist, he isn't a good welder, he works with what is at hand and he certainly isn't stupid. So after all that, what I was laughing at was the stupid comments that people make when 99% of them have no clue about what they are commenting on.
Everyone crapping on the work and manner in which it's performed need to keep in mind that knuckle is probably from a truck built in the 60s. They have no choice to replace it , probably none around and can't afford a new one if they even find one.
YOU CANNOT STICK WELD CAST IRON TO HOT ROLLED PLATE. IT DOESNT WORK! NEVER HAS! NEVER WILL! You can only braze cast iron and even then you have to preheat the material. This will never work!
it's from an excavator, not truck. And we have quite similar in new machines, they don't change so much through years. so availability is not an issue a think, but the price is. I bet over $3k for this part.
Soportara esa pieza el mismo impacto al que fue sometida cuando se rompio esa pieza ya presenta fatiga de matrial la sodadura no reemplaza bien al conjunto de la pieza la soldadura no reemplaza al toal de la pieza ¿ Cuanto durara esa reparacion ?.Ahi hay que reemplazar la pieza por otra igual..A la vista es un buen trabajo.
Working from scratch , even his pliers are handmade , gotta give them credit getting this done with minimal tools and repairing probably obsolete parts with no resources , nice work something that is lost in this hi tech world
Um profissional de altíssimo valor, poucos fazem este trabalho ou quase ninguém! Torneiro mecânico sim aqui no Brasil é depreciado, os salários aqui são desmotivadores! Nossa profissão está acabada! Parabéns aos proficiência que ainda persistem em fazer milagres.
Работа для обычного зрителя выглядит красиво и многие восхищаются и это понятно,но нагрузки деталь не выдержит и развалится.Токарь молодец,золотые руки!
Aqui no Brasil esse serviço chama-se Torneiro Mecânico. Não conheço em nossa região alguém que faça um serviço desse tamanho com essa qualidade. Parabéns
Первый раз в жизни встречаю рулетку которая может измерять десятые доли миллиметра. Штангель циркуль уходит в прошлое? А вообще, надо отдать должное мастерам, что то делают, стараются!
beautiful work! I was thinking press fit it all then weld. but you single-pointed everything and threaded it together then welded for a much higher strength. probably need that since it is for heavy equipment. you single point cut those threads real quick too. always takes me longer to do that. i like the dychem technic. coat the surface then thread until the paint is gone. I'll have to try that trick. instead of messing with my fancy thread mics.
When welding in the lathe, always have the earth clamped to the part, do not send the current through the bearing, this can seriously f**k the bearings!
@@thepubliceye I doubt it very much ! Not many people know about the risque. I've worked with Pakistanies, great guys, but they have a different mindset !
These men in the video make a near impossible task look like nothing to it. I wonder how many years he studied and worked to be able to accomplish this~!!! Their Craftsmanship is so advanced and they use what seems to be very old worn equip. They deserve to be admired and they save their customers thousands of dollars by not having to buy new parts even if they can find them. 💪🙏💪
I love watching this gentleman work.
Buen trabajo, conocedor de su oficio. Pregunta: cuántos dolares se cobrará por ese trabajo? Saludos desde Salamanca Guanajuato México .
This guy is the real deal anyone criticizing these guys you do it
Those skills are literally the basic skills of lathe work. Centering a piece and using a boring bar. The welding sucked ass. Id expect a 16-18 shop apprentice to know the same skills
The use of screw threads to avoid high tolerance machining is amazing!
I really enjoy seeing things made with basic machines and made up tooling. It shows what can be done without expensive equipment.
Them damn lathes are expensive. I get what you mean though i agree too lol.
Those are expensive drill bits and machines he is using!!
Love how they build from scratch!!
This vato is an awesome craftsman!!
I enjoy watching these videos, the machining and craftsmanship is just amazing and it's done with old antiquated machines, it's shows the talent of these men.
Quand on voit le matériel dont il dispose,on ne peut être qu'admiratif.Il n'a qu'un tour traditionnel et fait un travail formidable.Je suis moi même un tourneur sur métaux en retraite.Chapeau , l' ami.t'es un bon.
Absolutely fascinating! Say what you will, this man is a craftsman, great skills! Well done!!!
🤣
Tout à fait d'accord avec ce commentaire.
@@boldee101 Tell us about your machining skills then? What type of dissimiliar metals is this man working with that would pose a problem for welding? What type of rod should be used for this? How many years have you worked on a metal lathe?
@@tabcreedence6553 45 years as a machinist working all manner of machines including manual lathes in industry and research, 25 years in space research having the honour to work on a number of ground breaking projects including instruments for the James Webb Space Telescope, I have things I have made orbiting Earth, Mercury, Mars and on the surface of Mars, I have also worked on instruments that are currently being used in the early detection of cancer, so there are my qualifications to be critical.
Do you think our friend knows about the properties of the materials being used here and there compatibility? Do you think he even considered there compatibility beyond them both being ferrous materials? Do you think he ascertained the fatigue levels in the components being repaired and how safe it would be to repair? What about the longevity of the repair?
My guess would be that we are looking at a very old fatigued component made of cast steel so he could probably us any old welding rod he gets hold of, I doubt very much that he has a lot of choice or even knows their constituents.
Where they guy excels is the ingenuity of the repair, he isn't a good machinist, he isn't a good welder, he works with what is at hand and he certainly isn't stupid.
So after all that, what I was laughing at was the stupid comments that people make when 99% of them have no clue about what they are commenting on.
@@tabcreedence6553 funny that I replied to this and then it disappeared, I wonder why that was?
Sir you are a magician. With the equipment you have to work with and all your hand made cutting arms. Very good to watch you work.
Very professional work good job
Overloading vehicles can feed a bunch of good mechanics. Keep on with the heavy overloading!
суровый ремонт. Хз надолго ли. Токарь молодец
These guys are amazingly talented. Never get tire of watching them work.
Хороший мастер спасибо 🎉🎉🎉🎉🎉❤❤
Saludos y mis respetos a esos grandes trabajadores desde La Plata, Argentina.
Everyone crapping on the work and manner in which it's performed need to keep in mind that knuckle is probably from a truck built in the 60s. They have no choice to replace it , probably none around and can't afford a new one if they even find one.
YOU CANNOT STICK WELD CAST IRON TO HOT ROLLED PLATE. IT DOESNT WORK! NEVER HAS! NEVER WILL!
You can only braze cast iron and even then you have to preheat the material. This will never work!
it's from an excavator, not truck. And we have quite similar in new machines, they don't change so much through years. so availability is not an issue a think, but the price is. I bet over $3k for this part.
@@vetrieska11 WOW...! You pulled that comment from deep inside your colon...!
Your channel doesn't have any content to show your expertise ....
@@peatmoss4415 Just because my job is repairing, not streaming videos :D
Thanks for your statement and it must really Suck to be some these people~!!!!!!!!!!!!!
Soportara esa pieza el mismo impacto al que fue sometida cuando se rompio esa pieza ya presenta fatiga de matrial la sodadura no reemplaza bien al conjunto de la pieza la soldadura no reemplaza al toal de la pieza ¿ Cuanto durara esa reparacion ?.Ahi hay que reemplazar la pieza por otra igual..A la vista es un buen trabajo.
Safety Sandals.
My Favorite.
Working from scratch , even his pliers are handmade , gotta give them credit getting this done with minimal tools and repairing probably obsolete parts with no resources , nice work something that is lost in this hi tech world
Ap nay bohat accha km Kiya ha ap professional laghay io Jo is ko itni safai say adjust Kiya ha
Um profissional de altíssimo valor, poucos fazem este trabalho ou quase ninguém! Torneiro mecânico sim aqui no Brasil é depreciado, os salários aqui são desmotivadores! Nossa profissão está acabada! Parabéns aos proficiência que ainda persistem em fazer milagres.
Very impressive, great job.
Awesome way to repair that broken part , thank you .
You are wanderfull craftsman doing perfect job with basic machines. Look at machine, at hammer he use and does this job, Thank You for video I saw.
El trabajo no ha sido pagado . Se merece un gran premio🎉🎉
Mucho talento y verdadera economía circular. Felicitaciones
Работа для обычного зрителя выглядит красиво и многие восхищаются и это понятно,но нагрузки деталь не выдержит и развалится.Токарь молодец,золотые руки!
Как скоро золотых рук не будет? Останавливать движущихся части .
Love his knowledge and skill
SMART MAN
Good job!!!
Un professional extraordinari. Enhorabona.
This guy is a Master of His Trade.....
But cast iron and mild steel will not match
@@trevordsilva506 first thing I thought too but what do I know
Only you makes this kind of job...congratulations
His way of doing it vey vey good Idea of doing it.
Mashallah what a talents 👏
❤ Muito bom Parabéns 🎉
Aqui no Brasil esse serviço chama-se Torneiro Mecânico. Não conheço em nossa região alguém que faça um serviço desse tamanho com essa qualidade. Parabéns
complimenti. siete molto bravi. oggi nessuno fa piú queste riparazioni. Giovanni Italia
Very smart and crafted well these guys know their shit well done
Good work done come share your skills with us in the west
Thank you for sharing your video with us today . Truly an enlightening and educational video . Stay safe
ماشاءالله تبارك الرحمن عمل دقيق
Muito bom mesmo este trabalho que vocês fazem parabéns 👏😊
Beautiful machine work.
EXCELENTE GRACIAS
Todo lo pone en el suelo unos genio
Parabéns, ótimos profissionais.
great channel, u can bet he knows how to sharpen bits.
А я всё думал, как же ему удастся восстановить масляный канал. Иии... Никак! Он его просто заварил! 😮
Butuh ketelitian dan kecermatan tinggi dalam pengerjaan mesin ini,sangat luar biasa dalam pengerjaannya sangat presisi dan pas. Luar biasa👍👍👍👍👍
Ek number sikle ❤
Top demais
Excelente profissional
👍👍👍👍👍👍👍👍
I like the way the guy rocks up on the scooter with the part , the top parts floating loose and it’s not tied down 😂 super cool 😎
It wasn't overloaded just once. It probably a 20 year old equipment doing the work of three.
Parabéns e Obrigado
巴鐵師傅真的技術高超，簡單工具，配件决少，一樣可以完全修復
I enjoyed the beautiful job ,you have done
جميل جدا مزيان بزاف رائع اللهم صل وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين ❤❤❤❤❤
You do amazing work ,I would love to own that large lathe,
Extraordinario trabajo exelente
Первый раз в жизни встречаю рулетку которая может измерять десятые доли миллиметра. Штангель циркуль уходит в прошлое?
А вообще, надо отдать должное мастерам, что то делают, стараются!
Мастер "Золотые руки!"
Sungguh mengagumkan, idea dan kerja yang sempurna
Outstanding repair, well done
Lol😂😅
Good job👌👌👌🙏🏼🙏🏼🙏🏼
Przepięknie jest to zrobione pozdrawiam serdecznie 👍👍👍👍👍
Przestań pisać głupoty, to się rozpadnie w kilka sekund, jak można spawać odlew ze stalą.
@@Jarobart2 Wszystko będzie dobra. Pomalowali go sprayu. +50 do wytrzymałości. :)
Сделано именно красиво, но чугун надо паять латунью, а не варить электродом!!!
Ма шаа Аллоҳ!.
Now that was impressive!!!!
Gambiarra de primeira linha!
I thought it wouldn't work...then he painted the rust and I knew it would work just fine. It's those little details that bring a job together.
Excelente serviço! Parabéns!!
Super , what is the welding rod you use to weld mild steel and castiron ??????
Hola amigos lndu ❤ misrespetos q bientrabajan los felicito tienen milac ciempre
Wow! Great work! 👌👍
Very creative. 🙂
Апо мне а с техникой я с далеких 70 прошлого столетия то мужики молодцы ни чертижей ни спец приспособ и делают чудеса
Tjyýxqevbcchhch7v
These guy's overload everything.
If it is worth loading, it is worth overloading. 🙂
@@paulkurilecz4209 That's why your truck's are all down not to smart illogical statement.
@@edwardmartinez9459 Its a joke son. I say, its a joke.
@@paulkurilecz4209 Was this a comic channel or repair channel as for me being your son that is illogical there is no extrapolation of logic.
@@edwardmartinez9459 Did you ever hear of the cartoon character Foghorn Leghorn? It was a characteristic line of his.
Bahot shaandaar kaam hai aapka
Expert jobb ✨✨✨✨✨✨✨✨✨✨❤❤
beautiful work! I was thinking press fit it all then weld. but you single-pointed everything and threaded it together then welded for a much higher strength. probably need that since it is for heavy equipment.
you single point cut those threads real quick too. always takes me longer to do that. i like the dychem technic. coat the surface then thread until the paint is gone. I'll have to try that trick. instead of messing with my fancy thread mics.
1.3 million views in 2 months. Thats amazing.
Excelente trabalo saludos desde Guatemala felicidades y éxitos bendiciones para todos
Give this guy some modern tools and equipment and he could get us to Mars.
Muito bom o serviço parabéns 👃👃👃
When welding in the lathe, always have the earth clamped to the part, do not send the current through the bearing, this can seriously f**k the bearings!
I have rotary ground on the spindle, just like a weld positioner I bet they do also given they do this type of repair every day.
@@thepubliceye I doubt it very much ! Not many people know about the risque. I've worked with Pakistanies, great guys, but they have a different mindset !
Direct grounding
Измерительная головка мне понравилась. Установ заготовки всегда ОК!
These men in the video make a near impossible task look like nothing to it. I wonder how many years he studied and worked to be able to accomplish this~!!! Their Craftsmanship is so advanced and they use what seems to be very old worn equip. They deserve to be admired and they save their customers thousands of dollars by not having to buy new parts even if they can find them. 💪🙏💪
Exelente trabajo
GOOD JOB
Great job.
Good profesional
Well done.
Kann man das überhaupt machen ,Gusseisen und Stahl schweißen?! Aber sonst eine sehr gute Dreh-Arbeit. Danke für das Video.👏👏
Maybe not rich, but talented and hard-working.
끝내주는 기술^
Блин. Я не знал что чугун можно так варить. Мой диплом по сварке чугуна можно выкинуть, или им подтереться сходить. Обидно даже😭😭😭
Nice video
Trik yang digunakkan sangat sempurna
BRAVO !!!
Maguinificamente perfeito
ارفع لك التحية والتقدير
銲接的面積不夠抵抗強大的扭力！
それはとても疑問、強度的に大丈夫なのかな？