Thanks, I had the same issue, this helped a lot. I used a coat hanger to fish down, then pulled up an Ethernet cable, then pulled up the new drain hose all from the fender hole up. Thanks again, pay it forward is the best!
2006 RR Sport. Have both front windows not operational after storm. Found gray and black 3-wire nut. Mine were perfectly molded together with black plastic. Cut them off and reconnected. Problem solved! thanks to all!
I had this issue on my 2010 RR sport and I thought it was also my drain hose but for some reason someone had shoved this thick p piece of rubber behind the air duct. I felt they did it to block water from draining. Floor has been dry ever since lol on passenger side
my whole flor is wet and now i know that is from the ac drain plug but my radio and screen does not turn on i think its from those cables do you what cable is it ? please help Jump Garage
Hey good day I see you used the oem tubes. However I see Amazon has tubing cheap. Do you happen to know what size the tube is ? I already brought a few of the 15mm connectors. Thanks in advance
You don’t cut the nipple off the new hose, was saying cut it off the old hose if your having troubles fishing the pull wire through the hose since it angles out the end.
Hi dear my range rover Sport 2006 dont lock unlock the door. I test the key and funtion nice. But not lock unlock. Not rf signal do you know sonethink about the problem?
My method puts the rubber on the outside of the car so if it rots no big deal since the poly hose will still be in place when you silicone it. But if you wanted to use a generic poly tube will work to just gotta use a gromet for the hole or more silicone
Thanks, I had the same issue, this helped a lot. I used a coat hanger to fish down, then pulled up an Ethernet cable, then pulled up the new drain hose all from the fender hole up.
Thanks again, pay it forward is the best!
2006 RR Sport. Have both front windows not operational after storm. Found gray and black 3-wire nut. Mine were perfectly molded together with black plastic. Cut them off and reconnected. Problem solved! thanks to all!
Thanks! Very informative and helpful. My wife’s RRS is doing this same thing. Hopefully I can change out the end piece without removing the CJB.
I dealt with this also thanks for the great video. I had 2 red wires to one red wire that threw codes and lowered my suspension with blue tape.
I had this issue on my 2010 RR sport and I thought it was also my drain hose but for some reason someone had shoved this thick p piece of rubber behind the air duct. I felt they did it to block water from draining. Floor has been dry ever since lol on passenger side
my whole flor is wet and now i know that is from the ac drain plug but my radio and screen does not turn on i think its from those cables do you what cable is it ?
please help
Jump Garage
Hey good day
I see you used the oem tubes.
However I see Amazon has tubing cheap.
Do you happen to know what size the tube is ?
I already brought a few of the 15mm connectors.
Thanks in advance
If you cut that nipple off the end of the New hose, how did you reconnect it when you passed it thru the hole?
You don’t cut the nipple off the new hose, was saying cut it off the old hose if your having troubles fishing the pull wire through the hose since it angles out the end.
Hi dear my range rover Sport 2006 dont lock unlock the door. I test the key and funtion nice. But not lock unlock. Not rf signal do you know sonethink about the problem?
If the trunk button works and its just the lock unlock that does not work it maybe the wiring in the kick panel, like in the video.
When you put the new pipe does it go easily on the fender?
Its a little bit of a push but nothing crazy
It doesn't go all the way up there it sticks out
Jump Garage did you put the new pipe from the fender (outside) or from the interior?
Thanks a lot! It works!
Rather than replace with the same rubber that will rot off again, why not use a plastic poly tube?
My method puts the rubber on the outside of the car so if it rots no big deal since the poly hose will still be in place when you silicone it. But if you wanted to use a generic poly tube will work to just gotta use a gromet for the hole or more silicone
I am sorry, the tube is soft and a quick connector will not work with soft tube