BMW Window reset Anti-Trap function. How to fix loss of auto up/ down on your power windows electric
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Have you lost the Auto up or Down on your electric windows? Are they not closing fully or going fully down? I show you the RESET procedure here.
BMW Window reset AntiTrap function. How to fix loss of auto up or down on your power window
The BMW Store Genuine items: amzn.to/2UGZv4o
A link to some great BMW Accessories: amzn.to/2ELYwEG
A viewer told me I needed to add a link so people could buy me a Beer or Coffee when they are so helped, especially financially by my videos, so here it is Thanks 😃: www.paypal.me/...
Thanks for watching this Mark's reviews and Tutorials video. Mark is not a trained mechanic. Just a car guy that loves to drive and work on cars. What I do here may not work on your car and I am not intending to give professional advice for you to work on your car. But if you do know a bit about cars then hopefully watching these videos will help you to sort out what is going on with your car. Mark is not liable or responsible for any damage you do or things that happen to your car or yourself.
Cars are complex and dangerous things and not only can you be hurt working on them but you can also do serious and expensive damage to your car.
Cars should be worked on by qualified people, don't over reach.
Talk to a qualified mechanic if you are in any doubt.
Thanks Mark
I have a 1991 E88, the passenger front door glass stopped working at 50%position with the same warning light on dashboard . I followed your tutorial and it didn't work on 1st attempt or 2nd attempt but 3rd time lucky. I also held drivers front window switch up for 15/20 seconds then same switch took the drivers window down released and held button down for around 15/20 seconds repeated this action 3 times, all windows now working and the warning light has vanished. Thank you.
So Good to hear. Well done. MRT
Thank you so much for sharing this tutorial! Was at gas station and when I got back in the car my warning light for my power window anti-trap function came on and found it was my driver's that would not longer auto close. Looked in manual and no answer and was dreading a trip to the dealer for such a small stupid thing I knew would cost me my arm and leg! lol.
I followed your instructions along with you in my car and voila! All systems back to normal and warning light is gone and my window is fixed, you are a gem!! Thank you again so much for sharing 😁
I tried this and the window would not go back up
Worked a treat! Thanks. I replaced both rear window regulators on my 2008 E61 535d and followed this procedure exactly.
Short, to the point, and tells me exactly what I need to know! Thanks, worked a treat on my E61!
Genius!! Worked on my f31. The image of the window didnt flash up on the display, but still worked. My passenger window wouldnt go up automatically, but this quick fix rectified it. Cheers mate!!
Thank you for this reset instruction. It was the 2nd I tried. You saved me countless hours and a possible trip into the shop.
Glad it helped
Thank you. I just had the error yesterday. My passenger side window.
Did what you said, it worked!
Thanks for the video. Just wanted to say, my window was stuck down but when I hit up, it would move but not make any progress up. I tried this but what fixed it was pushing the up button several times in quick succession. Once it's out of the bottom position, it works fine up and down.
Thank you for the tutorial! Easy fix without spending a bunch of money. Mine did that this morning for the first time. My stomach dropped because that dreaded ding noise!! My car has left me stranded a few times and that darn ding always happens about 5 seconds before it stalls out. It now gives me anxiety anytime I hear it. 🙃 😟
On my driver's side rear window I have to constantly push button multiple times to get it all the way up or down, holding it down still won't work (and vice versa). Going to try this trick and see if it works. Will return momentarily. Praying this trick works like a charm because the warning ding and cluster light is so annoying. Lol.
The steps above worked a little different to my 09 e60. Rear right window.
Ignition on,
Antitrap error selected in I drive in the info section.
Rolled window all the way down (in increments)
Release when at the bottom.
Then fully press and hold for 17 seconds.
Then immediately press and hold up, pressing up didn't do anything on on first try then I pressed again.
Hold and the window should go all the way up to closed (keep holding) the window should return to fully open and then back to the top.
Release button, clear I drive and then it worked perfect.
1 and a half years of listening to that F-ing beeping everyone I get in the car, finally finished!
Hope this helped someone who like me tried every TH-cam tutorial but to no avail.
Amazing video. Worked first time on our 118d. Thank you so much
Thank you for your help, did not expected to be so easy to fix 😅
Totally worked. Thanks a bunch from the USA east coast!
Great, great video. Thank you this fixed my right, rear E90 window and cleared the CC ID 259 code on the dash. It does auto up and auto down properly now.
Bravo. Theres another way where you press the trip meter button for 17 seconds but this worked gd for me
Thanks l!!! Whatever he was doing didn’t work for me
Worked on the drivers door of my 2018 M2, thank you so much for your video 🙏🙏🙏🙏🙏
Well it worked fine on my 330i touring - 06. Thanks man.
budadi 👍
Worked on my E70 thank you man!
No problem 👍
Many thanks mate,it works in my BMW e92👍👍👍👍( had this problem after battery and alternator replacement)
Thank you....I have just fixed my window!
Well done Katie
Thank you for this video. I had no idea what this warning light meant because it is not on the list that BMW has on their website. I did notice when I got out of my car that my window was down, and I couldn't get it back up. I had no idea that the warning light and my window had any correlation. I will give this a try.
Glad it helped
Great info. This tip also worked on my 2015 BMW 2 series.
My 1 series coupe window rolls back down about 30% every time it reaches the up position. Can you help??
same, idk what to do
Thanks very much for this quick fix 😁
WORKED! 2006 325i even with back window stopping every 2 inches as it went down. And hesitating as it went back up. Good luck on this very ANNOYING feature
Thank you!! Worked on BMW e60
Cheers mate absolute legend
Worked with 15 seconds on my e82
Soo Good ...Glad it helped
Oh my god you saved me so much hassle! Window now working again on my 335d. Thank you!
Thank you!
You're welcome!
Very cool! I wouldn't have figured it would be as easy as setting the windows on the Corvettes.
Worked with mine!!! Thank you! BMW 330xi 2006
Worked perfectly on my 2011 F20 my windows just wouldn’t go all the way down or stay up at times after a long road trip, reset the drivers window and it’s all fixed. Appreciate the video
Worked like a charm on my 03’ 745li. Thanks
Cheers mate, worked for me !
Good on ya
👍
What about if your driver side don’t go down at all and the anti trap keep showing up whenever it’s pressed
That sounds like you have another issue. Look at your tracks to make sure they are clear and free and then also the motor.
Thanks a lot, bro! It really helped me 😊
My 2 back windows won’t roll up unless I click up from the driver side at the same time someone in the back clicks up from the back window . So unless front control and back control are pulled up at same time for that specific window.
This worked on my e82. Thanks so so much.
A true lifesaver 👍🏻👍🏻👍🏻👍🏻👍🏻
It also worked on my Seat Ibiza 6j
Wow Thanks for letting us know. 😃
Thanks dude,this error message just popped up and your instructions worked. Much appreciated.
thank you, it worked
This didn’t work for my BMW 325 i and my windows are working perfectly fine I still have a code on the dash tho someone help me please !
Worked after replacing FRM2 module
Great video worked straight away
My rear windows dont go down at all but you can hear the motors working
Worked on i3, thank you!
Wow i3 Awesome. Glad it helped
Thanks, worked like a glove for my 08 bmw 328i.
Glad it helped
Worked on mine! Thank you!
You Solved my problem !! Thanks, keep coming with this tips man 👍🏻
Adam Adam 👍
I got this window error on my 128i and after 1 week not driving it the error was gone and window functions restored. I did not disconnect the battery.
Im sure the fix in video can work but there is also some automatic reset in the cars.
Awesome! Thanks for the video
It worked , i love you💕
Thanks Mark. It works!
How to I remove the dash light for anti trap
This video shows the procedure to reset. That will remove the light. MRT
hello friend, I need help, the windows of my BMW e90 2007 stopped working in an instant, only the co-pilot works, it goes up and down perfectly, the other 3 do not go up they do not go down, I thought it was a problem with the switches and bought all 3 new, also check the fuses and they are good, with the key they all go up and down normal, but the switches are not working even though they light up when the car is started, try to reset by holding down the switches and it does not respond. I don't know what to do :( I really appreciate your help. Thank you very much.
Sounds like you need to replace a module. Either gm3 or 5
@@Marksreviewsandtutorials really? :(
How much can that module cost approximately?
In fact it locked my driver side window n now tht won’t go up thank you for the help really no jk it only made it worse tbh
That sounds like you have another issue. Look at your tracks to make sure they are clear and free and then also the motor. MRT
I checked the relays, fuses, changed the little grey box on the door, the black thing with the window buttons, even changed the wire hardness for the door. Still no power at all on driver door.😢😢
Worked well thanks
Sweet worked on my e60
on god this worked on mine tooo thank you 😊
Didnt work for me. My warning comes on randomly, and when driving the window will open on it's own up and down twice when the light pops on. After it closes, the light goes away. 20 minutes later happens again. Also noticed that when closing or opening my sunroof shade the window will do the anti trap again and open and close twice. Regulator or switch problem? Any ideas? Alternator makes an odd noise and when I aggressively move the window switch up and down the car will idle much rougher
I unplugged my motor to keep the window up as I'm not paying almost $200 for a new motor and I get that error in my dash. However this procedure doesn't work, I even tried to clear the codes with my BlueDriver scanner it comes right back. Unsure how to fix this?
Comfort closing on the passenger side didn't work. After trying this I can't open the window at all anymore (doesn't matter if I use the driver’s controller or on the door).
Sounds like you have a different issue. At least you know that it isn’t the switch if it is the same on both. I’d be looking at the motor to start with.
Thank you for the post.
What of it is coming on when you have removed the actuator and motor?
You are a true star 🌟 thank you so much.
In my case the window is going down just about 10cm and then I have to press again and again for about 5 times to go down and this technique is not working in my case 😕
To me this trick worked with engane starting
Finally thanks a lot
Thaks, it worked.
My driver side window will not go up or down. Any suggestions other than taking it to the garage to pay a small fortune?
Thanks great video 😀
My rear right window doesnt go all the way down , is that an error or it was in an accident
Hi did you try the reset procedure?
Didn’t work for me any other tips you can suggest for this
Excellent video!
My problem is I have no power on the driver side windows. I recently got a new battery and amplifier installed.
thank you life saver 🙏🏻
I'm working on a 2011 328i the passenger rear window won't go down or up front nighter switch. I have replaced motor regulatory and switches what's next?
I’d say a multi meter is next. Test to of voltage is getting to the parts and back track from there
I had a guy put his obd computer to the car. It said the rear window relay was bad. The only power window relay we can find is in the fues box and it's good anyone know of anymore window relays and where they are located
Hi their! My front right window goes down fully but can't go up more then half way. Please help :)
I
Am
In
The
Same
My anti-trap warning light has been coming on.. I went through the reset steps and the windows are working fine but still the warning light is coming on and the RPM counter is fluctuating erratically also.. This started happening the same time as the anti-trap warning light came on.. Any insights as to what i should do.. Thanks.. It's a 54 plate BMW 1 series I have.
thank you i was confused cus my fkin neighbor fucked wit my window but you resolved my problem big THANKS
I did this process on all my windows, but the warning is still there and keeps on peeping, it is so annoying. All windows works fine now but warning is still there. I had problem with both back windows on my E91.
Thank you very much
My window won't roll all the way up or down at once, even if I hold the switch. It stops and must be held down again maybe 4 times total.
Thanks
Thank you!!
Thanks worked on mine
Great!
Any idea if this works on an e46? Mine is in the shop right now so I can't test it myself.
Thx
Hi, this didn’t work for me
Yes there can be other things such as mechanical failure that a reset won’t fix.
Good luck w your repair.
Nothing on the drivers side works . The passenger side only comes up is short increments
I has the same Problem and I reset it and the windows work fine now
But the anti trap error from the dash don’t disappear
What can I do ?
Thanks!!!
any tips for me? I own f36 430xd and my rear right widnow not working.
Any advice for us? We have tried this reset as well as window initialisation via a scan tool.
Replaced the reg as wire was snapped when we bought it. motor tested and working - goes up with direct power but only goes down not up when using switch. Scan tool says switch is fine and physical inspection of switch says its fine too. What have we missed? Loom (in door) looks fine too
Sounds complicated. Do you have a multimeter? I would check the continuity of the wires to and from the switch and to see if power is leaving the switch when you are trying to wind the window up. Look at this video for how to do these checks. How to check car globes & globe holders and trace wires to fix faults and blown globes th-cam.com/video/MHFZ3vIGY84/w-d-xo.html
I have same exact problem and literally dont know what the hell to do anymore!! I removed the door card and found the window was dropped down, I pulled the motor off thinking the regulator is faulty so i tried to manually push the window up with my hands and i got it up fine. The regulator was perfectly fine. So I then thought okay then the motor is gone faulty so swapped the motor out with 2 other motors from my other working cars but the same issue. The window will go down but it wont go up with the switch. I then thought okay lets change the switch then and did so but still same problem. I have even changed the wiring loom over from the other car and still the same issue!!!! Have tried insta window initialisation, same issue..... My passenger side works perfectly fine up down and auto up and down. the driver side down and auto down works but i cant go up or auto up. What the hell is wrong with it ? :( Please help im literally losing hair over this!
Didn’t work on mine any other ways to make it go away
I have a 2011 e90 320d Efficient Dynamics, and the auto close on the driver's door window only works with the engine running. Is that normal?