Great video, Well done! I'm an Amsoil Dealer in Georgia. Did the Power Foam flush in a '01 Expedition with the same 4.6 engine. Got the engine nice an warm, sprayed it in & let it soak. Took it for a short drive to a country road, then from a dead stop gave it about 1/2 to 3/4 Throttle and the smoke that came from all the carbon deposits was astounding! It thoroughly cleans the air intake throttle body and also helps clean the catalytic convertor. Amsoil will make your vehicle run smooth & give Superior protection.
Thanks Roger! Really appreciate your support. The AMSOIL Engine and Transmission Flush and Power Foam are incredible! I love seeing the reactions from people after everything is cleaned up. The fuel economy increase alone pays for the AMSOIL quick!
I have an 04 town car and used Amsoil in it for the first time recently. Amazing difference in how smooth it runs and performs! I used the engine flush, and signature 5w20 with the Amsoil filter. I also did the fuel system flush and run the upper cylinder lube regularly. Amazing how smooth she runs now compared to when I got her. I will be trying the foam next! Love the panther platform cars! Thanks for your service to both of you!
Nice! Thank you for sharing. I really enjoyed cleaning this one up. The look of amazement on his face really makes it worth it. Your 2004 will love a can of AMSOIL Power Foam. It's like "tune up in a can"! You're welcome.
Thanks Pointbreak 82! Ha-ha. Not this time. What we did was a HUGE help to this vehicle. The owner was overly impressed with the results. Like you said. Maybe next time...
Never got to the rear. Why would suggest going with 10W-40? Here's a helpful lookup guide to see exactly what AMSOIL recommends for your vehicles, www.amsoil.com/guides/?zo=1649274.
You're welcome! Yes it is safe for O2 sensors and the catalytic converter. However, I would not recommend spraying through the Mass Air Flow Sensor and spray directly into the throttle body. Instructions on are the back of each can. It does such a great job of cleaning out the crud that I've turned off several check engine lights over the years!
Thanks Jeremey. It's my understanding it's not completely necessary. However, there are instructions on the AMSOIL box and I guess it's just an old habit for me. I like doing it.
@@officeroil-amsoil3463 there's nothing wrong with that 💯 do what you prefer i just notice when I do it myself that it takes a few secs because it will say low oil pressure with a red light then have good oil pressure when I prime the oil filter it doesn't do that I think it helps reduce dry starting
Thanks for reaching out from Pakistan. I power of the internet is amazing. I agree with you. Carbon loves to cake on in the worst behind the scene places. AMSOIL Power Foam, www.amsoil.com/p/power-foam-apf/?zo=1649274, does an incredible job of removing the carbon. I’ve even turned check engine lights off with it before.
Great question. No you don't need to. AMSOIL Power Foam does an excellent job of filling all the nooks and crannies. It wouldn't hurt to completely open the throttle plate, however I wouldn't lose any sleep over it.
I'm with you Jim Williams. We are all feeling the pain. For best results the AMSOIL Upper Cylinder Lubricant is recommended with every fill up. However, many people don’t add it with every fill up. Some is better than none. Some add it when they change their oil change, others never at all.
It will certainly help maximize fuel economy. Like you said, we could all use as much help as we can get. Unfortunately, the fuel you get at today’s pumps lacks many of those great cleaners and additives that your vehicle loves. They’ve stripped your gasoline down to the bones to keep cost down. So yes, lower price, but if left untreated it will end up costing you more down the road. Consider becoming an AMSOIL Preferred Customer and saving 25%, www.amsoil.com/offers/pc/?zo=1649274 Have you ever tried either the P.i. or Upper Cylinder Lubricant in your vehicle?
@@Blueduckrules My understanding it's not always necessary. However, it's just something I've always done to my oil filters. Typically you can even find the pre-fill procedure on many oil filter boxes.
I feel like you're dammed if you do and dammed if you don't. I understand why we wouldn't and to pre-charge the oil filter. However, there's ALWAYS the possibility of contamination. I'm with you...
Nice! Thank you for sharing. I love the success stories. Are you running the 0W-40 in your HEMI, www.amsoil.com/p/amsoil-signature-series-0w-40-100-synthetic-motor-oil-azf/?zo=1649274?
Yes, I am an AMSOIL Dealer. I sell AMSOIL to help support my family outside of law enforcement. My videos are meant to be educational and/or instructional. Then also provide my viewers with the info to get their own AMSOIL to better protect their vehicles/equipment. I hope they'll consider using my AMSOIL referral # 1649274 or go through my website, officeroil.com/, so I can get a little credit for the info. No worries, if not, I'm just happy to help. Thank you watching my video and following my channel.
Thanks John. I absolutely believe so! AMSOIL blows away the OEM specs. Built for those who demand the best in performance and perspective. I'd compare Motorcraft to dial up internet and AMSOIL to high speed internet. Both oils get you online but which is faster and more efficient?!?!
I'm with you. It's interesting though that Ford doesn't make their own oil. It's all private label. I'm not sure who make their oil and puts the Motocraft name on the bottle???
Great video, Well done! I'm an Amsoil Dealer in Georgia. Did the Power Foam flush in a '01 Expedition with the same 4.6 engine. Got the engine nice an warm, sprayed it in & let it soak. Took it for a short drive to a country road, then from a dead stop gave it about 1/2 to 3/4 Throttle and the smoke that came from all the carbon deposits was astounding! It thoroughly cleans the air intake throttle body and also helps clean the catalytic convertor. Amsoil will make your vehicle run smooth & give Superior protection.
Thanks Roger! Really appreciate your support. The AMSOIL Engine and Transmission Flush and Power Foam are incredible! I love seeing the reactions from people after everything is cleaned up. The fuel economy increase alone pays for the AMSOIL quick!
I have an 04 town car and used Amsoil in it for the first time recently. Amazing difference in how smooth it runs and performs! I used the engine flush, and signature 5w20 with the Amsoil filter. I also did the fuel system flush and run the upper cylinder lube regularly. Amazing how smooth she runs now compared to when I got her. I will be trying the foam next! Love the panther platform cars! Thanks for your service to both of you!
Nice! Thank you for sharing. I really enjoyed cleaning this one up. The look of amazement on his face really makes it worth it. Your 2004 will love a can of AMSOIL Power Foam. It's like "tune up in a can"! You're welcome.
Awesome video Scott. I’m surprised you didn’t do the rear diff as well… maybe next time lol….👍👍👍
Thanks Pointbreak 82! Ha-ha. Not this time. What we did was a HUGE help to this vehicle. The owner was overly impressed with the results. Like you said. Maybe next time...
I would definitely use a 75 140 in the rear axle and a 10 W 40 in the crank case I know Amsoil makes it in a signature series
Never got to the rear. Why would suggest going with 10W-40? Here's a helpful lookup guide to see exactly what AMSOIL recommends for your vehicles, www.amsoil.com/guides/?zo=1649274.
Thanks Officer Oil!
You're welcome. Really appreciate your support!
Great video very informative thank you! Question is power foam safe on the Oxygen sensors and the catalytic converter? Thanks again!
You're welcome! Yes it is safe for O2 sensors and the catalytic converter. However, I would not recommend spraying through the Mass Air Flow Sensor and spray directly into the throttle body. Instructions on are the back of each can. It does such a great job of cleaning out the crud that I've turned off several check engine lights over the years!
I sometimes prefill my oil filter now I was told you should if its turbo or supercharged but everyone has different options
Thanks Jeremey. It's my understanding it's not completely necessary. However, there are instructions on the AMSOIL box and I guess it's just an old habit for me. I like doing it.
@@officeroil-amsoil3463 there's nothing wrong with that 💯 do what you prefer i just notice when I do it myself that it takes a few secs because it will say low oil pressure with a red light then have good oil pressure when I prime the oil filter it doesn't do that I think it helps reduce dry starting
@@jeremeyrichards7755 I'm with you. Can't hurt other than taking a few extra seconds to charge it up!
Usually the carbon is inside or otherside of the butterfly valve where intake manifold adjoins the throttle body anyways best wishes from Pakistan
Thanks for reaching out from Pakistan. I power of the internet is amazing. I agree with you. Carbon loves to cake on in the worst behind the scene places. AMSOIL Power Foam, www.amsoil.com/p/power-foam-apf/?zo=1649274, does an incredible job of removing the carbon. I’ve even turned check engine lights off with it before.
Don't need to open the throttle plate with the power foam?
Great question. No you don't need to. AMSOIL Power Foam does an excellent job of filling all the nooks and crannies. It wouldn't hurt to completely open the throttle plate, however I wouldn't lose any sleep over it.
damn he recommends that stuff for every gas tank fill - r u serious. has he been to a grocery store lately...
I'm with you Jim Williams. We are all feeling the pain. For best results the AMSOIL Upper Cylinder Lubricant is recommended with every fill up. However, many people don’t add it with every fill up. Some is better than none. Some add it when they change their oil change, others never at all.
It will certainly help maximize fuel economy. Like you said, we could all use as much help as we can get. Unfortunately, the fuel you get at today’s pumps lacks many of those great cleaners and additives that your vehicle loves. They’ve stripped your gasoline down to the bones to keep cost down. So yes, lower price, but if left untreated it will end up costing you more down the road. Consider becoming an AMSOIL Preferred Customer and saving 25%, www.amsoil.com/offers/pc/?zo=1649274 Have you ever tried either the P.i. or Upper Cylinder Lubricant in your vehicle?
It might be better just to use Rotella semi synthetic and a frame endurance oil filter that’s supposed to filter at 99+
Rotella diesel oil in a gasoline engine? What micron rating does Fram claim to be 99% efficient?
Amsoil #1
Prost!
Attitude. Other person seems like helper in the video
Yes. Huge help!
You should never pre fill the oil filter, just a fyi from a master tech.
Thanks Hiro. Old habits...
@@Blueduckrules My understanding it's not always necessary. However, it's just something I've always done to my oil filters. Typically you can even find the pre-fill procedure on many oil filter boxes.
I feel like you're dammed if you do and dammed if you don't. I understand why we wouldn't and to pre-charge the oil filter. However, there's ALWAYS the possibility of contamination. I'm with you...
I swear by Amsoil
Thank you. What do you like most about AMSOIL?
@@officeroil-amsoil3463 I always used Pennzoil ultra or mobil 1 but Amsoil makes my Hemi engine run much smoother and quieter.
Nice! Thank you for sharing. I love the success stories. Are you running the 0W-40 in your HEMI, www.amsoil.com/p/amsoil-signature-series-0w-40-100-synthetic-motor-oil-azf/?zo=1649274?
@@officeroil-amsoil3463 calls for 5w-20
Ah okay. Many of the HEMI engines do call for 5W-20. I typically see the 0W-40 recommended for more of the higher horsepower HEMI engines.
This guy is everything I HATE about a snakey slippery sales person.
Yes, I am an AMSOIL Dealer. I sell AMSOIL to help support my family outside of law enforcement. My videos are meant to be educational and/or instructional. Then also provide my viewers with the info to get their own AMSOIL to better protect their vehicles/equipment. I hope they'll consider using my AMSOIL referral # 1649274 or go through my website, officeroil.com/, so I can get a little credit for the info. No worries, if not, I'm just happy to help. Thank you watching my video and following my channel.
I use Ford motor craft for my Vic is a amsiol better
Thanks John. I absolutely believe so! AMSOIL blows away the OEM specs. Built for those who demand the best in performance and perspective. I'd compare Motorcraft to dial up internet and AMSOIL to high speed internet. Both oils get you online but which is faster and more efficient?!?!
Ford didn't think so, and they designed and built it.
I'm with you. It's interesting though that Ford doesn't make their own oil. It's all private label. I'm not sure who make their oil and puts the Motocraft name on the bottle???