Dynojet Power Commander V Install ZX6R

Shop Dynojet - www.jpcycles.c...
Dynojet Power Commander V Features Include:
• The PC-V has a reduced size from PCIII usb (less than half of the size of PCIII)
• Gear and speed input to allow for map adjustment based on gear or speed
• Analog input allows user to use any 0-5 volt sensor and build an adjustment table based on input such as boost or temperature
• -100 to +250 fuel change range wich allows more adjustment range for 8 injector bikes
• 10 Throttle position columns (up from 9)
• You can switch between 2 maps “on the fly” and maps can be adjusted on a “per gear” basis ( one map per cylinder, per gear, if required)
• Allows for adjustment of fuel and timing based on engine temp through the “cold start feature”
• Will power up with USB cable only for programming purposes
J&P Part: 160-3033
Need help removing the tank and airbox? Check out the K&N Air Filter Install Video here:
• K&N High Flow Replacem...
#Dynojet #powerCommander #MotorcycleTuning

[@jpcycles]

See more how to's on Countersteer - www.jpcycles.com/countersteer?Dynojet_Power_Commander_V_Install_ZX6R&I3GaNF_f_As

[@Bob_Jones123]

I used your video, not to install a power commander, but to change my spark plugs! It honestly is the clearest instructions for taking off the gas tank and air box! Thanks!

[@LunarKr3W]

This is an excellent installation video. Just finished installing the PCV on my bike 2017 Zx6r. Took me nearly 4 hours 🥵. Thank you so much for making this video and being so thorough

[@michaelneal7079]

Great video, favorite part of installing is when finish and start your bike and the dash looks a Christmas tree , make sure all those connectors click or youll have a mild stroke when see all the lights on your dash ...good times ...

[@terraEnvy]

Awesome tutorial video. I want to install a power commander eventually but I watched this to help with being a little insecure on how to properly remove the gas tank and air box for a different install!

[@tunjuelito]

Great video. Thank you

[@1320MustangBoi]

@6:50 that screw is STRIPPED! Lol!

[@wutdafugchug7175]

I have like 9 of those 3hp stickers on my bike. Butt dyno says YEAAAAHHHHHHH!

[@TheScorpionZ900]

hey, i noticed the Gear Input & Analog input cables were worn out. I took them out to cut a bit and put them back in but now I forgot in what position they were connected. I have put them in according to the fold of cables, but the question is; would it be remarkable if they were wired incorrectly? Thank you.!!

[@kc.95]

Nice make more videos about fixing zx6r 13+

[@JimmyFaev]

next week im going to get an ecu flash/tune on my 2020 zx6r... should i also get the power commander??

[@VirtuosoX1]

Does a power commander let you change the STPs and ignition timing?

[@mdoncius]

Does PVC from zx6r 2007-2008 fits to zxr6 2009? It has all the same wires except the “blue“ one (at 8:43 )?

[@lambomrkinin4123]

Can i just pay them to install it

[@m.d.bishop1244]

Second question at 6:10 what are those two plugs in the tail section? I didn’t have them on my 05. Thank you

[@m.d.bishop1244]

@Val Kyrie Thank you

[@b20btec]

Where did you connect the power?

[@vincently1231]

posi tapped it to the gear position sensor

[@vincently1231]

8:39

[@spencelogan5498]

At 8:23 talking about the throttle position sensor, I unplugged the power one, then plugged in new female plug, but where does the original male plug go???

[@BigPappaLos]

Man... it just can't be this easy....

[@json216]

It's that easy..the lower tops sensor is the black one..under the grey one tho...only tiny detail he didnt point out...but video is awsome

[@king_of_636s]

I have a 2020 ZX6R is this the same process?

[@leohanna954]

Let me know if you find a answer, i need it

[@king_of_636s]

@@leohanna954 I did. It's the same. Pretty simple. You only need like 2 allens and a phillips head.

[@leohanna954]

Anthony C nice, happy to hear that. Is it also straight forward tuning the power commander for the right map on the computer

[@MondayCheese]

Can I ask if there was anything different you did? I followed the tutorial step by step on my 2020 zx6r abs and it doesnt run with it connected. I removed it and now I have an engine light and the Traction control is disabled..

[@m.d.bishop1244]

When I disconnect the main fuel line how much fuel can I have in the tank? Does it need to be empty or does the pump keep it from running out? Sorry I know for some this is a simple question.

[@TheStickfigure007]

The pump will keep from running out, it can be full itll just be heavier to maneuver