@BensWorx I've seen a couple people do this or do several layers of colored paint with a black top coat. It might be a fun craft to try with your new XTool?
Only if you scratched too much of it off. It's india ink on the board--the ink itself lasers off really nicely. I wouldn't add india ink to it unless the board was scratched or something else happened. If you wanted to touch it up after lasering, but didn't want to use india ink, you could maybe opt for black paint, but since the rest of the board is india ink, you'd need to match the paint with the ink or it would likely stand out. If you wanted to fix any scratches before engraving, the india ink is a bit more fragile and easy to remove, so that allows me to lower the settings on the laser and still get a crisp result without burning the substrate the ink is on. It's absolutely possible to engrave through paint, but I haven't tried it on those boards. I've only really tried burning an image into tile with paint. I've seen some people do it with canvas, but I don't know what the settings would be--likely higher than what I'd need for the india ink.
I am so happy to see you also have the Muse. I'm new to lasers but I have one also and now I'm even more excited to see someone with my machine!! Great tutorial. I have happily subscribed.
Awesome job. I just bought a laser, and I had wondered about using it on scratch board as a sort of way to make prints of my drawings. Looks like it works! Thanks for sharing 😊
Thank you! It's so easy to engrave on scratchboard. It's one of the easiest things I've engraved on, and the images it produces is stunning. Definitely worth it.
@@theartistpod4609 Thank you for taking the time to reply. I gave my first try with one of my bird images following your advice and I was pretty happy with the result. I am using a 5W diode so I still have to nail down the settings.When I wiped with the microfiber it seemed to catch on the surface and I think I may have had too much power. I blew it off with the air assist hose and it really brightened up. Thanks again Peace Greg
@@nopriors Yea it might be a smidge too much power. If the end results still looked great, I imagine you're probably pretty close to the right settings. And you're welcome!
I take a micro fiber cloth and gently rub it off. I don't put a lot of pressure, but the micro fiber cloth seems to grab the dust pretty well to clean it up.
Awesome video and great information. Would you have a link to get the scratchboard that’s actually a board? I thought I had it but my order arrived today and it’s paper. lol.
@@EsayasZerazion Yes, that's the brand! I opted not to get the camera option in mine--it seems to glitch on people a lot. I also have since swapped out the standard lens it comes with to the 1.5 lens. The 1.5 lens is better for engraving, but worse for cutting. I have only used mine for engraving, so switching to the 1.5 made sense for me.
Very good idea and great result! I tried to engrave on some plastic with a thin metal layer using an LED laser, but the result was far from yours. P. S. Your art is beautiful!
Seems quite expensive at $10 for one board. I think it would be easier to buy a pack of basswood and paint them before engraving. Definitely cheaper though you have to spend time painting the boards. It looks good though. Of course you can use the thinner scratch board and attach it to something thicker like basswood.
Yea, I do agree. It is a bit more expensive for the boards unless you do it yourself. Or, like you said, you can get the cheaper boards and attach it to something thicker. I like the look and feel of these, and the detail is good enough you could probably sell them for a lot more once you apply a finish to it. The image is nice and crisp.
@BensWorx I've seen a couple people do this or do several layers of colored paint with a black top coat. It might be a fun craft to try with your new XTool?
Hey amazing work. Do you coat the finished product with laquer or anything?
That looks really good! Is there a reason you would touch it up with specifically india ink?
Only if you scratched too much of it off. It's india ink on the board--the ink itself lasers off really nicely. I wouldn't add india ink to it unless the board was scratched or something else happened.
If you wanted to touch it up after lasering, but didn't want to use india ink, you could maybe opt for black paint, but since the rest of the board is india ink, you'd need to match the paint with the ink or it would likely stand out.
If you wanted to fix any scratches before engraving, the india ink is a bit more fragile and easy to remove, so that allows me to lower the settings on the laser and still get a crisp result without burning the substrate the ink is on.
It's absolutely possible to engrave through paint, but I haven't tried it on those boards. I've only really tried burning an image into tile with paint. I've seen some people do it with canvas, but I don't know what the settings would be--likely higher than what I'd need for the india ink.
I am so happy to see you also have the Muse. I'm new to lasers but I have one also and now I'm even more excited to see someone with my machine!! Great tutorial. I have happily subscribed.
Thank you so much! I hope it helps.
This is an amazing piece of work! I just received my Muse 3D and am going to try scratch board soon. Thank you for the tips and great video!
could you use air to remove ash
Yea, probably! I've never tried, but that should work.
Awesome job. I just bought a laser, and I had wondered about using it on scratch board as a sort of way to make prints of my drawings. Looks like it works! Thanks for sharing 😊
Thank you! It's so easy to engrave on scratchboard. It's one of the easiest things I've engraved on, and the images it produces is stunning. Definitely worth it.
When you wipe off the piece does the surface feels smooth or rough?
Thanks
Greg
It feels smooth when I wipe it off, not rough. For scratchboard, it doesnt' cut down enough to make it feel rough.
@@theartistpod4609 Thank you for taking the time to reply. I gave my first try with one of my bird images following your advice and I was pretty happy with the result. I am using a 5W diode so I still have to nail down the settings.When I wiped with the microfiber it seemed to catch on the surface and I think I may have had too much power. I blew it off with the air assist hose and it really brightened up. Thanks again
Peace
Greg
@@nopriors Yea it might be a smidge too much power. If the end results still looked great, I imagine you're probably pretty close to the right settings. And you're welcome!
What is the best way to remove the dust after engraving on scratch pape? Thanks
I take a micro fiber cloth and gently rub it off. I don't put a lot of pressure, but the micro fiber cloth seems to grab the dust pretty well to clean it up.
@@theartistpod4609 thanks
Awesome video and great information. Would you have a link to get the scratchboard that’s actually a board? I thought I had it but my order arrived today and it’s paper. lol.
Oh no! Here is the link I used to order mine: www.amazon.com/gp/product/B000IG2OXM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Is it possible to purchase that design?
What program are you using?
Very nice. I'm gonna give it a try myself. 👍👍👍
Beautiful!
Thank you!
Hi there
That is so amazing.
Can you tell me the brand of the laser engraver please?
Thanx
I use a Full Spectrum Muse Core. It's been a phenomenal laser engraver to work with!
fslaser.com/amp/musecore/
Is this the brand?
If not can you tell me your brand please. Thanx
@@EsayasZerazion Yes, that's the brand! I opted not to get the camera option in mine--it seems to glitch on people a lot. I also have since swapped out the standard lens it comes with to the 1.5 lens. The 1.5 lens is better for engraving, but worse for cutting. I have only used mine for engraving, so switching to the 1.5 made sense for me.
@@theartistpod4609 you are the best.
Thanks
By the way you are doing amazing stuff.
Where do you get your scratchboard from?
I got it from Amazon. Here is a link to what I used: www.amazon.com/gp/product/B000IG2OXM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@@theartistpod4609 Thank you!
Very good idea and great result! I tried to engrave on some plastic with a thin metal layer using an LED laser, but the result was far from yours. P. S. Your art is beautiful!
Thank you so much!
What a doll...
Use a lint roller for most of the debris, then lightly wipe away the rest. Cheap lint rollers have too much tack so use 3m ones 😉👍
Ah that's brilliant! Thank you.
Seems quite expensive at $10 for one board. I think it would be easier to buy a pack of basswood and paint them before engraving. Definitely cheaper though you have to spend time painting the boards. It looks good though.
Of course you can use the thinner scratch board and attach it to something thicker like basswood.
Yea, I do agree. It is a bit more expensive for the boards unless you do it yourself. Or, like you said, you can get the cheaper boards and attach it to something thicker.
I like the look and feel of these, and the detail is good enough you could probably sell them for a lot more once you apply a finish to it. The image is nice and crisp.
I liked the Muse 3D, I don't have $ 6000 dollars :(
Awesome job.
Thank you!
This is an amazing piece of work! I just received my Muse 3D and am going to try scratch board soon. Thank you for the tips and great video!
Thank you so much! Scratchboard is the easiest thing I've found to engrave on so far.