Thank you! This whole tutorial is really great, but especially thank you for the last bit where your Inkscape program didn't subtract the difference even though you had selected both paths. I was having that same problem, but once I followed your instructions using the nodes tool, it finally worked! Thank you! Thank you! Thank you!
Thank you again Wendy! You share the BEST tutorials! So clearly explained and such great examples! Please keep them coming! You’ve helped me tremendously! Thanks again!!
The reason you couldn't perform the path-difference operation at minute 8 in your video is that one of your paths was Grouped. Just need to ungroup the three green paths and perform this on each one. But your solution works great. Nice tutorial. Thanks
Very cool. Thanks for the Inkscape help. It would be good to have a way to maintain exact alignment between the parts instead of moving them around like you did. In this case it didn't matter but another scenario might require it. Great job though. Thanks! (new to inkscape)
realise this is old now but the reason the path>exclusion did not work is because you have the green grouped, ungroup them select them and do it repeat it and it should then work
I believe the problem with trying to do your Difference is your green space pieces are grouped. If you ungroup, select all you will be able to perform your Difference action.
No, they weren't grouped, they were unioned, I use Ctrl ++. It happens occasionally. If I go into node editor, the nodes are all there and Inkscape recognizes that it's a path. Just one of those odd things :)
Hi I hope you still check your replys on your YT channel. My question is. I'm trying to make an invitation using a gift clip art image I found with hello kitty clip art. I'm going to weld them to make the fold. Question is the tip of the ribbon will have the fold how can I make it so that when I score and fold I'll have the top of the ribbon stand up and not bend. Do I make sense?
Hello! There, would you help me out with a knockout text of happy Mother’s Day...I did it but when I try to place the letters on top of the shadow I made doesn’t centres it and place it outside the shadow, also place a flower on the words...hope you understand what I’m saying....please and thank you ☺️
thank you! I'm learning so much! Question- how to decide when there are too many nodes for Design Space to handle? To get the detail around this image you probably need all the nodes? verses the letters you helped me with, had a TON of nodes.
I don't really have a definite way to tell, other than saving it as detailed as you want, try to bring it into DS and if it fails, come back and simplify it a bit. Sometimes it's obvious when you look at it that it's just enormous,but most times it's just trial and error for me.
Wendy Edwards I was wondering if you would help me with an image. My sister n law sent me her logo for her bakery and I tried inkscape but didnt have much luck. She lost the original file and is wanting mr to make her some aprons and shirts. Only problem is I cant get it to work in sil studio or cricut ds.
Thank you! This whole tutorial is really great, but especially thank you for the last bit where your Inkscape program didn't subtract the difference even though you had selected both paths. I was having that same problem, but once I followed your instructions using the nodes tool, it finally worked! Thank you! Thank you! Thank you!
Thank you again Wendy! You share the BEST tutorials! So clearly explained and such great examples! Please keep them coming! You’ve helped me tremendously! Thanks again!!
clean and easy video with ALOT of information-thanks for taking the time to share!!!
This is a spectacular video. Thanks for sharing your skill set.
GooooooooooD Job
Really enjoying your tutorials! It's helping me a lot. thanks :)
You Do Great Tutorials!!!! Thank you so much keep up the GREAT WORK!!!!!!!!!!!!
Love this video
Thank you for this tutorial that is 👌 👏
Great explanations. Simple instructions. Thank you.
Fantastic video, thank you Wendy. Loved it.
all of you videos are so helpful to me.... thank you, thank you, thank you!
Thank you! I'm just getting started with Cricut and love starting and stopping the video as I practice.
This is awesome...and so easy. Thanks so much.
Very nice tutorial. Was exactly what I was wanting to do. Subbed
fantastic as usual:
thanks, i am on this learning curve with you.
Thank you Wendy,love your videos
Wendy love the way you teach...I would like to learn how to do the heart beat line design with favorite outlined picture. thanks!!!
This is really great. Thank you so much!
Save as an ouch lol .. good stuff well done x
Great video so clearly explained thank you
Please make more videos your an awesome instructor!
This is what I am looking for. Thank you so much ❤️
Great Video! Easy to follow.
Thank you!! Can't wait to try this!!
The reason you couldn't perform the path-difference operation at minute 8 in your video is that one of your paths was Grouped. Just need to ungroup the three green paths and perform this on each one. But your solution works great. Nice tutorial. Thanks
Very cool. Thanks for the Inkscape help. It would be good to have a way to maintain exact alignment between the parts instead of moving them around like you did. In this case it didn't matter but another scenario might require it. Great job though. Thanks! (new to inkscape)
So cool! Thanks!!!
Good demo!
great video
Very helpful vid! thank you
realise this is old now but the reason the path>exclusion did not work is because you have the green grouped, ungroup them select them and do it repeat it and it should then work
WOWOWOW
Hello Wendy.
How would you edit a black and white lady silhouette svg to make it look like a colorful girl clipart?
I believe the problem with trying to do your Difference is your green space pieces are grouped. If you ungroup, select all you will be able to perform your Difference action.
No, they weren't grouped, they were unioned, I use Ctrl ++. It happens occasionally. If I go into node editor, the nodes are all there and Inkscape recognizes that it's a path. Just one of those odd things :)
Your right. You did a union, not group. Sorry.
Will this tutorials work with carbide motion with a cnc ?? You only mention this working on the sticker cut outs machine
Thank you!
Hi I hope you still check your replys on your YT channel. My question is. I'm trying to make an invitation using a gift clip art image I found with hello kitty clip art. I'm going to weld them to make the fold. Question is the tip of the ribbon will have the fold how can I make it so that when I score and fold I'll have the top of the ribbon stand up and not bend. Do I make sense?
Hello! There, would you help me out with a knockout text of happy Mother’s Day...I did it but when I try to place the letters on top of the shadow I made doesn’t centres it and place it outside the shadow, also place a flower on the words...hope you understand what I’m saying....please and thank you ☺️
thank you! I'm learning so much! Question- how to decide when there are too many nodes for Design Space to handle? To get the detail around this image you probably need all the nodes? verses the letters you helped me with, had a TON of nodes.
I don't really have a definite way to tell, other than saving it as
detailed as you want, try to bring it into DS and if it fails, come back
and simplify it a bit. Sometimes it's obvious when you look at it that
it's just enormous,but most times it's just trial and error for me.
Wendy Edwards I was wondering if you would help me with an image. My sister n law sent me her logo for her bakery and I tried inkscape but didnt have much luck. She lost the original file and is wanting mr to make her some aprons and shirts. Only problem is I cant get it to work in sil studio or cricut ds.
Love this video