How hard is HueForge printing?
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2024
- Today I will go over my first experience with the HueForge software.
Change:
layer height to .08mm
First layer to .16mm
seam position to nearest
infill density to 100%
infill pattern to rectilinear
disable prime tower
Model I created: makerworld.com/en/models/7418...
patreon.com/LenDizzlePrintz
Support the channel and buy a shirt:
www.lendizzleprintz.com/
Maker Space Stuff:
Sewing/ Cutting Mat- amzn.to/3najNkv
Steel Rulers- amzn.to/3K89Ddn
Digital Caliper- amzn.to/40CyF9I
Nut Drivers- amzn.to/3LVb2oP
Hex driver- amzn.to/3zcuJkg
Tekton Screwdriver set- amzn.to/3FNfhiv
Sharpie - amzn.to/3ZUg4Fv
Filament I recommend:
eSUN PLA+ Filament - amzn.to/41YCnMl
Paramount PLA - amzn.to/3JuyfLI
Video Equipment:
Canon EOS R7 - amzn.to/40iHuFQ
Canon M50 - amzn.to/3ZUJKmx
Canon EOS R7 RF-S18-150mm F3.5-6.3 - amzn.to/3T3BKx3
Canon RF50mm F1.8 STM - amzn.to/3T0Shlj
Canon EF-S 24mm - amzn.to/3FwTtHR
SmallRig Cage Canon EOS R7 - amzn.to/3JNLAQA
SmallRig Cage Canon M50 - amzn.to/3LxfXMH
Label Maker:
Brother P-Touch Cube Smartphone Label Maker - amzn.to/3l3Q5gD
Refill - amzn.to/3JLUdvc
Lights:
Octagon Softbox - amzn.to/3YQB7Iw
As an Amazon Associate, I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
FYI the layer numbers already take the +1 into account so you don't want to add one to the values on the sliders. The describe txt or describe button have exact instructions for your.
Otherwise all good info.
Great video, would have been great to see the finished print for longer. But what a great idea. Thanks.
Thanks for the video Len, this seems like a no brainer if you're even thinking of creating your own. I just bought the personal license for myself and will be playing with it.
I bought my copy in the week it was released, LOVE this software. BTW.. It does lithophanes too😊
Thanks Len. Good starting lesson.
How this not exploding the internet? I mean 3d printing has been around for awhile now but this is absolutely stunning. I did an elephant hue forge for my mother in law the other day and she about cried. She was just purely astounded and couldnt wrap her mind around it haha. Thanks for the vid
Does Hueforge can do make lithopane pannel?Bottom is black..so I wondering about that how can we make lithopane.
I have a problem with exported STL file from Hueforge. In Hueforge the file has 22 layers but when I open the stl file in Bambu it only has 12 layers. What is a possible solution for this dilemma?
Your layer height is likely set at the default. There are a few settings in Bambu Studio you have to change to print them properly, like infill at 100% as well.
Good video. I'm glad you didn't leave anything out!
Well, left out the Process settings - I see he has a Process called 0.08mm Hueforge setup. So what are the walls, infill percent etc set to?
@@NickBR57 Good question, I'm pretty sure you must print 100% infill.
All the changes are in the description for hueforge setup
@FilmFactry correct
TD calibration. That's the part u missed that will make it sound complicated (it's not, actually) @@lendizzle77