How to stop engine shaking problems--Motor mounts removal and replacement (97-01 Toyota Camry)

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.ย. 2024
  • 1999 Toyota Camry motor mounts removal and replacement. If your car engine is shaking after you turned it on, chances are, the motor mounts are damaged and in need of replacement.
    If you found this content meaningful and useful, please support this channel by subscribing and liking the video. Thanks!
    Links to products in video:
    amzn.to/36V7OiI
    Complete Engine Motor & Transmission Mount kit for 1997-2001 / Toyota/Camry, Solara / 2.2L / Auto Trans
    amzn.to/3LsVghk
    NGK (8916) RC-TE58 Spark Plug Wire Set
    Please subscribe!
    Check out my other videos:
    DIY Cabin Air Filter Removal and Replacement--Tesla Model 3 AC Smell Problem (2021)
    • DIY Cabin Air Filter R...
    DIY Front Brake Pads Replacement (2011-2017 Toyota Camry)
    • DIY Front Brake Pads R...

ความคิดเห็น • 30

  • @ameliany8649
    @ameliany8649 2 ปีที่แล้ว +3

    I drove this EXACT car when I first got my license 😉

    • @xomnipresent8913
      @xomnipresent8913 2 ปีที่แล้ว +1

      Exactly what I’m doing now. This exact car and just got my license 3 months ago 😂

  • @steveforbes7718
    @steveforbes7718 ปีที่แล้ว +3

    First, that is a straight 4 cylinder, not a V-4!
    Second, I never buy parts online, EVER! Nor would I ever give any business to Scamazon!
    I use local parts dealers such as AutoZone, Advance, O'Reilly's or NAPA! That way, if I have any problems or warranty issues, I have a living breathing body with which I can deal, in person! No overseas call centers involved!
    Whenever possible, I will use factory parts from the dealership because although they are more expensive, they are the correct part every time and I know they will work and last far longer than anything made in China!
    For the most part, this was well done. I truly appreciate your concern for safety and for knowing your limitations. That is most commendable.
    Your son now has a very reliable and safe car that will last for years. I have a 1999 Camry 4 cylinder that has 360K on it and it's still running strong. You could not have made a better choice.

    • @diypotentials
      @diypotentials  ปีที่แล้ว

      I really appreciate your feedback-very insightful and helpful. Thank you!

    • @ButterNutter37
      @ButterNutter37 10 หลายเดือนก่อน +3

      Auto part retailers charge upwards of 100% markup on many items.
      I have had no issue buying parts online from Rockauto. Been working on my cars for over 14 years this way.
      That's not to say I don't use Orielly and NAPA, but Rockauto is amazing too.
      2002 Toyota Sequoia 4.6L - 253k
      2002 Toyota Camry 2.4L - 265k

    • @YourMomsBestToy
      @YourMomsBestToy 2 หลายเดือนก่อน

      @@ButterNutter37 only got screwed with parts on the toyota from rockauto but besides that theyre better than paying a ton for the same name brand shit.

  • @shaneohalloran9106
    @shaneohalloran9106 2 ปีที่แล้ว

    Damn we are old if that's a classic.☘️🤣

  • @dsteward85
    @dsteward85 2 ปีที่แล้ว +2

    These cars run forever

  • @2023_Max
    @2023_Max 11 หลายเดือนก่อน

    You need to change the rear control arm bushings or grease them

  • @YnotZap
    @YnotZap 2 ปีที่แล้ว

    Great video!

  • @marksedgwick8704
    @marksedgwick8704 9 หลายเดือนก่อน

    great video thanks for sharing. i wanted to ask you how are the motor mounts holding up? how many miles so far and did they stop all the vibrations and rough feeling idle shakes. i have a 95 camry 2.2L and i was looking at the same mounts prior to watching your video and i was like hey he used the same mounts i was looking at.

    • @diypotentials
      @diypotentials  9 หลายเดือนก่อน

      Thanks for reaching out. The motor mounts are holding up well with lots of miles added, no issues since they were installed. Thanks again.

  • @cholio24
    @cholio24 2 ปีที่แล้ว +3

    Uhm I needed the back motor mount on how to do

    • @robertvanderbaan3722
      @robertvanderbaan3722 ปีที่แล้ว +1

      You need the same set up for holding and raising engine. Also 17mm deep socket for all three nuts, and top bolt. Top bolt is tricky but I used a 4 inch extension to 1/2 inch socket with size down 1/2 to 3/8 elbow, then angle with extension to breaker bar. Feed through center between engine and charged air cooler. The bottom three are easy just look hard. Any questions let me know. My camry is a 2000 with 330. I also put the tire under the car just in case. Have a pipe to make it easy as well.

    • @naelhadi7122
      @naelhadi7122 ปีที่แล้ว

      @@robertvanderbaan3722 wha

    • @naelhadi7122
      @naelhadi7122 ปีที่แล้ว

      From where you got the parts (from which brands exactly)??thx

  • @aboreal7
    @aboreal7 9 หลายเดือนก่อน +1

    the one i need to see how to change it u didn’t do it

  • @robertvanderbaan3722
    @robertvanderbaan3722 ปีที่แล้ว

    Do the seals leak?

  • @kpballa1009
    @kpballa1009 2 ปีที่แล้ว

    wow, you must be a mechanic! I have a 98 camry.. 4 cyl. 240k on it. recently i changed the a/f sensor and now i need to do air intake hose because that's ripped in the middle. but the reason i looked up motor mount is because when i shift gears, Reverse to Drive or whatever else, just once in a while it sort of gets caught in something when i'm shifting.. do you think that's related to the motor mount?

    • @diypotentials
      @diypotentials  2 ปีที่แล้ว

      Thanks for asking. I'm not a mechanic, but I love fixing things around the house, including cars. For your question, it does not sound like a motor mount problem at all. You might want to search TH-cam for gear shifting problems or stuck gear. Hopefully you can find a video or two that might be helpful. Good luck!

    • @robertvanderbaan3722
      @robertvanderbaan3722 ปีที่แล้ว

      It is likely the rear Trans feed to the props is needing new or more Trans fluid. The Trans stick does not show this level as it is separate. Learned the hard way.

  • @Ralfie214
    @Ralfie214 2 ปีที่แล้ว

    I have this car and my engine shakes every now and then and it has troubles accelerating, sometimes when the car is stationary, it shuts off, you think if change the spark plugs and spark plug wires it will fix the problem?

    • @diypotentials
      @diypotentials  2 ปีที่แล้ว

      If the engine shakes, most likely the engine mounts are worn. I replaced, the spark plugs, spark plug wires and spark plug coils, solved my misfires problems. Troubles with accelerating, you might explore issues with transmission and issues with vehicle shutting off, you might explore issues with cam sensors…Best of luck 🍀!!!

  • @naelhadi7122
    @naelhadi7122 ปีที่แล้ว

    Where did you get the parts from ??!!thx

    • @thouny1145
      @thouny1145 ปีที่แล้ว

      The links to the products are below the video description. Thanks!

  • @DONMARIO96
    @DONMARIO96 ปีที่แล้ว

    Where did u get the parts from?

    • @diypotentials
      @diypotentials  ปีที่แล้ว +1

      The links to the products should be in the video description. Good luck on your project. Thanks!

  • @lowellbowers8328
    @lowellbowers8328 2 ปีที่แล้ว

    😍😍💯😘!!! Increase your stats = Promo>SM !!