MF 165 Power Steering Cylinder Rebuild
ฝัง
- เผยแพร่เมื่อ 19 ส.ค. 2023
- Join me in this captivating MF 165 massey ferguson adventure as I dive into the world of mechanical magic! 🛠️ In this infotainment extravaganza, I take on the challenge of rebuilding and repairing a power steering cylinder for the classic Massey Ferguson MF 165 tractor. 🚜💥
☕ If you'd like to buy me a coffee:
► woodlandwrench.com/support
💖 Your support helps me continue creating content like this ❤️
📚 Playlist of all MF 165 front axle repair videos 📚
• MF 165 4WD Front Axle ...
🟢 This power steering cylinder is the same across various tractor brands like Nuffield, Ford, International and also various old Massey Ferguson models like the MF 148, MF 165, MF 168, MF 175, MF 178, MF 185, MF 188 and also some in the 200 series, like the MF 265, MF 275 and MF 290. 🔧
🛠️ This is a much cheaper option than purchasing a brand new power steering cylinder! With just a gasket kit and some DIY expertise, you'll be able to transform your old beat up cylinder to a fully functional part, ready for countless more hours of Massey Ferguson adventures! 🚜🚜
🎬 Sit back, relax, and witness the captivating journey of turning old rusty MF 165 parts into roaring power fit for a new life! From dismantling to reassembly, I share every twist and turn of this restoration escapade, sprinkled with a generous dose of humor. 🎉📚
🛑 But hold your wrenches! This isn't your typical step-by-step tutorial. While I do spill the beans on the process, my primary goal is to entertain and engage. Expect witty anecdotes, candid bloopers, and heartfelt confessions about the joys and trials of bringing old machinery back to life. 🎙️🤣
🤓 Curious about the common pitfalls and challenges I encountered? I spill the power steering fluid on those too! From unexpected hiccups to moments of triumph, this somewhat of a rollercoaster ride. 🎢🔧
So, whether you're a tractor aficionado, a DIY enthusiast, or just someone looking for a good ol' time, hit that play button and embark on this mechanical voyage with me. Don't forget to leave a comment, share your own stories, and let's rev up the engines of infotainment together! 🚀📹
For those interested in part numbers:
Complete power steering cylinder options: MG 1830316, MG 1853195, MG 1885579, MG 1884374, MG 3186320, A57420, 1853466, S.40132, 30/580-3, VPJ 4226, M.1853466, 3186320 M92
Gasket kit selections, for resealing (I had to combine both for my cylinder!):
Gasket kit for original cylinder: MG 1885710, MF0570, 1885710, S.40134, 1885710M91
Gasket kit for newer type cylinder: 1810394M91, 1810437M91
Cylinder turnbuckle (for power steering adjustments): S.40143, 30/579-1, VPJ4016
Power steering fluid options:
Choose between red ATF type A (or equivalent) or M-1129A transmission fluid. IMPORTANT: Avoid modern Dexron or other transmission/power steering fluids in the original assembly!
- Exception: If you've overhauled your power steering pump and cylinder, replacing all seals, you might consider other fluids.
- Why? Dexron and similar fluids can damage old-type seals, leading to internal leaks from pump to engine and other issues, potentially wrecking the power steering pump. - ยานยนต์และพาหนะ
crazy coincidence I found this video. I have this same tractor and am currently doing the same exact thing to it. I have the cylinder in the vise waiting for me for in the morning lol.
Haha, that's wild, youtube has a 6th sense. Good luck with the rebuild. I hope it goes well!
Thanks for watching! 😊
Great video brother, mine has writing on it too but still have some differences in ours. My service manual says there were 3 different styles who know lol
Thanks for the kind words! Did you manage to get the correct seal/gasket kit for yours?
I ended up figuring out that there was nothing wrong with the cylinder after putting it under air pressure. it will retract fine it ended up being the whole system just had some much slack in it that it wasn’t moving enough to trigger the valve to release oil into the cylinder. Did lots of cleaning and going to try cutting or adding to the all thread that makes the adjustment there
@shoeyfilms5739 Ahh. Yeah, it can be a bit fiddly to get it adjusted properly. I hope it works out for you without having to spend too much $$
i have seen 3 different power steering setups for the 165
Need a repairkit for my MF 165 year 1966. (steering cylinder) but can't find the sparex side for it . Can any one find me the right www side ? Thanks.
Not sure about sparex direct link, but here are some part numbers:
1810394M91,
1810437M91,
MG1885710,
MF0570,
1885710,
S.40134,
1885710M91
I see in your thumbnail that yours is 4wd I’d love to see a video just overviewing the details on your build there. I know MF didn’t make the 165 4wd or with a bucket. I’m wanting to use mine to move round bales. Westendorf makes a bucket for them. I’ve heard people say that when doing that you need to 4wd swap it as well so you have the structure on the front axle to carry a load. But if you look online there’s multiple picture with 2wd with buckets. Apparently the load can snap the front axle easier when hitting bumps and such. I don’t know, educate me.
You're absolutely right. They never made the 165 with 4wd. The first mass-produced tractor they made with factory 4wd (that i could find) was the MF 1505 (massey harris did, however, make some unique 4wd variants back in 1930!)
There have been many 4wd kits made for the various models by third parties, importers, and local dealers.
Four Wheeled Traction Ltd was a firm that built a few 4-wheel drive conversion of tractors and other vehicles, including the MF 165.
My 165 was imported and re-built as a skidder by a company in Norway, back in the 1970s, I believe.
You can still purchase conversion kits today. There are various designs for this, but your point about the stock front axle being a weak point is definitely true. Swapping to 4wd helps, but then your next weak point will be the mounting.
I think a big consideration for fitting 4wd is to strengthen the front axle mount as well. On mine, they just used the stock axle mount, which is not sturdy enough to where you should put any significant load on the axle, via front loader or similar equipment. At least not for driving with heavy wet silage bales, etc.
Sure, I could make a walk-through video of the tractor and 4wd system! I'll see if I can get around to it soon.
Thanks for the detailed reply. Sounds good, be waiting for your next vid. I’m currently having a pc built after my computer crashed. Gonna go with something big that can hold some footage this time and I’ll be posting again myself. I’ll have to make a video for you on my 165.
@@shoeyfilms5739Yeah that would be cool to see 👍
I have a IMT 560 deluxe 4wd that has a lot of the same parts as a MF 165, also took a loader off my MF 275 and with a little adjusting fit it to the IMT 560
@@farminwithfergusons Nice!
I saw your "IMT 560 brakes" video. Pretty interesting rig.
Thanks for watching! ❤
I'm not sure but 75 years does sound like a long time to fix power steering on tractor.........
Hahaha 😂
Should have it in a vice
Yes! I'd like to get one for chair-height work. The only one that I have requires standing, which isn't great for long sessions like this.