Delonghi Dedica EC680M Espresso Machine Review and Tutorial
ฝัง
- เผยแพร่เมื่อ 20 มี.ค. 2019
- It doesn't take a professional barista to make great espresso every time with the Delonghi EC680M espresso machine. This is a review of the features this machine has, and a tutorial to show how easy it is to use this daily for amazing results.
Delonghi Dedica EC680M on Amazon: amzn.to/2U11iyH
Get Two Free books on Audible: amzn.to/2DefPR7
This is the perfect machine that only takes minimal learning to create great coffee drinks with ease. Espresso, Latte, Cappuccino, Americano, and much more are within your grasp in minutes.
This is the perfect small narrow machine which works great while saving counter space. It has all the features you need, but none of the ones you don't need!
Delonghi Dedica EC680M Amazon: amzn.to/2U11iyH
Le Chrusett espresso mug: amzn.to/2OltCGP
Frothing cup: amzn.to/2Hyl8Mb
Espresso Tamper: amzn.to/2JuPvVi
Perfect Espresso Beans: amzn.to/2TnMZQz
Fresh Ground Espresso: amzn.to/2U53O7a
Claim a FREE stock for signing up for Robinhood here: join.robinhood.com/jonaths8161
My Gear:
Main Camera: amzn.to/2C6OmOb
Main Zoom Lens: amzn.to/2QJlDHm
Sharpest Wide Lens: amzn.to/2GsSb2L
Favorite Not RODE Mic: amzn.to/2C4W0se
Best Portable Vlog Mic: amzn.to/2u8kegF
Perfectly Smooth Gimbal: amzn.to/2MXBCgr
Camera Strap: amzn.to/2rvGtMd
Field Monitor: amzn.to/2GtyDet
Affordable Studio Light: amzn.to/2rzdAic
Drone: amzn.to/2EgitUT
Perfect Camera Bag: amzn.to/2UykJg1
Music: epidemicsound.com/
#Espresso #Coffee #Tutorial #Delonghi
💼 Business Inquires : goattoaster9@gmail.com - วิทยาศาสตร์และเทคโนโลยี
![How to perfect shot espresso you Delonghi Dedica EC685 with Bottomless Portafilter [Brew Ratio 1:2]](/img/n.gif)
What features do you look for in an Espresso Machine?
Good froth. Love cappuccino.
One that's able to steam without overheating that quickly
Non-pressurized basket, standard no-fancy steaming wand is enough for me.
@@micahroberts3564 you want to get a machine that has 2 boilers so the water and steam are heated seperately. but they are quite a bit more expensive.
Does it still work fine?
@goatoaster At the time 06:28 something goes wrong! The mode that you use is to cool down the machine after foaming. That by no means is the machine overheating. This is used after foaming up milk to be able to pull a espresso. This mode runs water thru the boiler to cool it down since espresso is made at a way lower temperature than the steam.
Got this as a gift and it's sat on the shelf for some time as I wasn't sure how to use it....thanks for helping out: coffee is now a feature!!
Well there always videos for almost everything here on TH-cam... Or online 😂
What a great tutorial! I was feeling overwhelmed with all of the tutorials until I found yours. Thank you!!!
This was an excellent video. Informative and comprehensive while remaining short and lightly entertaining. Thank you - I'll buy this machine now! :)
We bought this about 18months ago and still love it 😊
Thank you for doing a review focusing on the features that work for you instead of making the viewer feel inadequate for not being a skilled barista.
This video was a big help! It gives important setup and operation tips.
Just got this the other day! Great tutorial!
Thanks dude, got my wife one for Christmas and your video had us making the perfect coffee in minutes.
Thanks, I'm so glad I was able to help! Merry Christmas!
He actually doesn't do it quite properly
Just got this machine for Christmas and so far so good! It made great Espresso. I'm still learning the cream method...hope to save "drive through" money ha!
Great honest review. Looks like something I would consider buying. I consider its overheating very minor, but great to actually see it in the review!
Thank you! Now I know what I will purchase!
Bought this for myself and my husband for Christmas. Should have watched the reviews first. I'll be taking it back.
Thank you for this review you lovely soul
I got same machine for about a year now. Works nice and makes great espresso.
Thanks for showing us how it works - I just ordered mine!
How do you like it?
How do you like it?
Thank you for a great video.I brought this machine today.I agree with you,about its edge over the Breville espresso at similar price point.Very pleased with my purchase,its a bargain at the end of the day.I,m just learning how to use the machine.I am getting good results,but as i learn it will get better.
My favorite. Very stylish look.
Thank you a lot, I have one and I love it
You will hate it when it starts having orange flashing light issue
Best tutorial on this machine, thanks 🙌🏼
Super helpful - thanks!
Thank you so much I think I'm going to get this one. Great review.
How do you like it?
NDR SHR yes I purchased it last year and I love it!!! I definitely recommend it to anyone looking for a space efficient model👍🏻
You had me at the gallon of milk smashing the pitcher on your counter - super funny
Thanks so much for the video. I got the same machine. It's awesome!
I love the quality of espresso for how easy it is to use now that I have worked out a good system!
Hey man great video thanks. 😁👍. Much respect
great review, thanks!
Great review. Thanks!
Aah thank you for this tutorial! It helped especially when using the steam
Thank you! I'm so glad it helped
Thank for the feedback
Thank you for the review. I've stayed with the Nespresso machines under $100 for more than a decade; there are many points I don't like, they break so easily. then i decided to switch to this Delonghi Dedica (Deluxe) and it's another world, feels so professional. I ordered boxes of 150 soft pods from Italy (Borbone - Napoli), it's much cheaper than nespresso (aluminum) pods and far better, ... and yes, the foam and the aroma, we love this machine. I'll try your technique without the pods (in Amazon Europe your Tamper is about $30!).
I'm so glad you like it! I think any metal tamper would be better than the plastic on that comes with the machine, but even that one does the job.
Can you use pods?
@fionadutton7045 you can always rip out the pods to extract coffee. Thats what i did with nespresso pods i got as samples when using on keurig machine.
I have the same machine and I have been using for a few years now.
Couple years ago, I managed to open the machine up and changed the steam wand.
I've been thinking about doing that. I recently did the unpressurized stump mod and really like it
How many espresso can you get in a day?
@@JJShankles Thanks for such a nice, practical, relatable review! I like your relaxed, but well-organized style!
Question: have you done a video on how to modify to the non-pressurized use?
And: for your non-pressurized, what grinder can you use? I don't want to pay hundreds for a grinder. My Delonghi is making some pretty good espresso for me, but I'm interested to try non-pressurized if I can do it with my Bodum Bistro grinder.
Thanks "Goat Toaster!" (oh... do you like your goat toast golden brown or dark brown crunchy?) :-)
great review!
Great review! I just bought one, and this helped me understand how to use it.
Delonghi's machine is very good! I use Magnifica S and it tastes too good and I drink too much coffee. The video was very helpful! With love from Japan :)
It's a really good review! I'm actually only getting started with my new machine and it was really helpful :) I'm a former barista, and it was my dream to make this kind of coffee at home one day :) Really looking forward to using it and make a perfect coffee with it!
I'm still working on the latte art, I have so much respect for baristas after making my own. It takes more skill than it looks like!
@@JJShankles
Do this and thank me later;
- Change the steamer to one from Rancilio Silvia (gen2)
- Buy some unpressurized baskets (Graef 145722)
- Cut off a piece of the plastic in the bottom of the portafilter (so the new baskets can fit)
Some people cut the actual portafilter so they get a" naked look", but it's not needed.
Best of luck on your Barista adventure mate!
I've heard good things about those mods. The steam wand that comes stock really doesn't give much control over how the foam is made!
GoatToaster 9 yeah it gives about 0 control.... but if you’re drinking plain espresso I’d really recommend go and buy the unpressurized basket, cut off a piece from the plastic insert of the portaholder.
You’d be amazed of the amount aroma and crema you’ll get!
@@TraderTaurus Hi mate, does the Rancilio steamer fit the delonghi machines or does it have to be modded? Also, with the unpressurized baskets, will this also help with making a flat white? sorry, i am new at this.
Omg its Tfue.
Nice video, i almost bought it, ended up getting the 420.1 but now i think its a bit too big :(
Very nice and professional review thanks
Glad it was helpful!
It is an excellent premium coffee machine for a family!
Great tute
I had a Breville but it started leaking at the bottom so returned it to get the Delongi. Both are similar and personally I prefer the Delongi.
Hi, if u don't mind me asking. What exactly make u like the delonghi over the breville?
I bought one just know. Im so excited to try it I hope its be received early 👍
How do you like it?
Great video - I just purchased one because of your video. thank you
Hope you enjoy it!
Thanks for this brother ❤️❤️
I'm glad you enjoyed it!
De-Long-e -eeeeeeeeeeeeeee for the pronunciation :-) Nice review
Great video
Thanks fro this video, I was really struggling with mine one which I bought recenlty, it was helpfull.
Pretty good review.
Thanks!
Nice vid, Straight to the point, no bullshit like these other videos. You sir get a like!
Thank you for the kind words, it means a lot!
Thanks!!
Your machine stopped frothing at around 06:33 because by the time you actually turned the lever handle to the steam position the machine switched back to the espresso shot setting. Your timing of this was perfect as you can see the single shot button light up as soon as you turn the handle to steam (06:23). For some reason, the steam setting only stays on for a set amount of time before the machine switches back to the espresso shot presets. I'm sure there's a good reason for why the machine is programmed this way.
It’ll be a heat thing the machine would rather disable the steam wand then just shoot subcritical water into your milk
This has happened to me as well, I could ot understand why?
Th@nks jj. I like your easy to understand presentation
You are welcome!
Thank you
I'm glad you liked it!
I’ve found if you move the milk jug up and down it as you rotate it it does make more foam xx
Très intéressant... Merci... !
Thanks for the great review. What grinder do you use, and have you tried many different ones? Thanks.
amzn.to/2KJoJaF This is the grinder I use, I have used a simple blade grinder, but I really like this one.
I have had mine for over 2 years it's getting tired now I keep cleaning it out I run vinegar through it works well for a while then it's done I think the pump is going but it has been a good machine.
I'll have to use vinegar next time I have to clean this out.
thank you GoatToaster! Just bought this one and trying to figure it out. Never owned one before, this was very helpful! can you recommend a coffee bean grinder that's not too expensive? I see one on your counter there :) thanks.
I drinked only instant coffee at home but once i tryed fresh grounded with milk and sugar and it tasted great. Now i think about buy my 1st coffee machine but nothing expensive and from all of others i saw this from delonghi looked best . Still think about with to buy and even though many reviewed good and even dew bad things almost on any machine and so idk yet. I first wanted from lidl shop silvercrest machine , but i am sure delonghi will be way better for it since its only on coffee brand
Looks good!! I have the LaVazza mini and it’s working great but this machine may not last too long so I think this ( Delonghi) maybe my next machine!
This Delonghi is still working great over two years of use
In order to get more foam, you should try aerating the milk first for about 4 ish seconds. So basically, you keep the stream almost at the top of the milk and you hear this sound almost like paper ripping. And after you put the nozzle all the way in to finish foaming the milk. For a cappuccino, you can aerate the milk for about 7-10 seconds which will produce much more foam. A cappuccino is mainly foam and a little bit of milk. But thanks for the review of the machine.!!!
Thank you for that tip. I've felt like my foam game could use some improvements!
Great Review! what is your preferred ratio for the single and double shot?
4:03
pitcher: ok man, i quit !!! 😆💥🤕🤣
hahaha
Great Vid. What grinder do you use? THanks.
I noticed that by turning the foam handle more, in hot water function, the pump starts to run. What does it change?
Hey man, cool video and thanks for uploading. I have this machine and am having trouble getting a nice flow through the espresso. It starts to flow after approx 5 seconds and then becomes a little temperamental. Am i doing something wrong? I am using espresso ground coffee in the double shot filter. I am also tamping down well
You may be tamping down too hard if it is having trouble getting a good flow. The 5 second delay is usual for it to build pressure
Oh my god you are a life saver I work s in a cafe and our coffee machine is broken and they bought me this delonghi coffee machine and I didnt know how to steam my milk now I get it( the machine was already used and doesn't have the manual) thank you2222
I'm so glad you found it useful!
Whole heartedly agree with this except when he said that the milk frother isn't very customisable and gives you the same foam every time isn't true, I've been experimenting after watching multiple videos and im now quite able to make very frothy steamed milk while also being able to make a small amount of foam but steam the milk nicely(think of the difference between a latte and a cappuccino)
Also the machine didn't overheat although someone already addressed that^
I just got one, and yes it gets some failure. I used it in the morning and it was good, I used it like at 2 pm, and I was good, I used for my mom at 5 and it was good but I used like 7:30 or 8 pm and u could not get single nor double shot. It just wouldn’t come out. Not it’s not the first time, so idk if I should give it back or what.
What is your grinder?! I've been looking for one like that
Just picked this machine up! Do you have to let any steam out after making the espresso but before removing the handle/grounds holder?
No, after the espresso brews I just rotate the handle off
How do you get it ready for first use? The instructions in the manual are confusing.
You make putting the coffee holder in so simple! I'm having trouble getting mine in. How do you do this?
@Nick Bavea, it might be that you have too much coffee in. The tamper he showed helps to level things and ensure you don't have too little or too much
What setting on your grinder do you use? I have the same one, and I'm thinking of buying this espresso machine.
I use it between fine and extra fine that range works well for me
Great video. Love my machine, but my one complaint is that the unit doesn't get hot enough for the steamer. The lack of heat will stop the steamer mid-way, so I usually pre-warm the machine for 5 minutes or so after I make my espresso.
Do you do it like him? If so it’s wrong. The down position is to draw water and bring the temp down so you can brew coffee after steaming milk. If you draw water and bring the heat down then it stops midway in the steaming. If you do it correctly it shouldn’t stop. You’ll actually have to cool it down to continue using it for coffee.
@@jcosk8 I think he's doing it correctly. He first draws it down to release some of the residual water. That's how it's explained in the instruction manual as well. I understand that if you continue to draw water, it'll cool down the boiler so that you can make espresso again. I think he's right in that it isn't the strongest heating element so you have to let it warm up for a few minutes. I also have my toaster plugged in to the same outlet - I don't know if that makes a difference.
@@Anthony-wp4vh According to the manual you should "position an empty container under the cappuccino maker
and open the dial for a few seconds to eliminate any air left in the circuit. Close the dial again". So you shouldn't draw any water, just make sure there is no air caught up in the tube.
This is very different from the instructions for cooling the machine to make coffee again: "To make coffee again immediately after frothing milk, the boiler must first be cooled or the coffee will be burnt.
Proceed as follows:
• place a container under the cappuccino maker;
• open the steam dial to deliver hot water and cool the
boiler..."
***
You only need to draw hot water when you want the temp to go down to coffee making levels.
If you draw water before wanting to use steam you are basically cooling down the machine before you start, it makes no sense.
@@jcosk8 I think that's what I saw him do. I usually do a quick release. Of course when you do that, some water is going to come out before the steam. It's just purging a bit of the line. Anyway, it's all good! I love my machine and it hasn't really been a big issue.
@@jcosk8 so what position for the steam?? Should we push the knob further to the back?? sometimes i think knob position play a role in here, but i dont know if it's true or not...
I just got mine and it was really noisy (and leaks!) so was waiting to hear the noise of the pump to compare it to a working one and...
Regarding the milk brother, I have removed the steel tube from the brother and have better control of the foam I want. Thanks for the great review. I use a jug when descaling under the frother to stop splashing. I understand there is a way to reprogram how long the machine stays on before sleep mode kicks in, as I have accidentally changed mine and misplaced the manual, could you tell me how to reset that?
This review helped me decide on buying this machine over others. How did you so easily swing/lock that portafilter ? When i try to do it, it feels like it gets stuck towards the end and i’ve nearly toppled the machine over doing so. Any advice?
Your dose (the amount of ground coffee in the portafilter) is too much. Just reduce it until you can turn the portafilter properly.
Hi, I had an updated version of this coffee machine for Christmas I love it. Been using illy coffee in it, thank you for the video. Can you change the temp of coffee?
I'm not sure, I haven't messed with changing the settings, but I think it might have some adjustability of some settings.
Thanks for the review. Unfortunetly I really wanted to hear how loud it was but you played music over the actual coffee making part :)
Sorry about that. I just measured it with an app, and the brew cycle was between 50-52 Db which is below a "normal conversation". Steaming milk was a bit louder between 65-70 Db. I can easily carry a conversation during the brew cycle. I think my grinder is louder than the brew cycle
@@JJShankles thanks so much for that info :)
I can’t seem to attach the filter into the INSERT to put in espresso
Is there a trick or how to line it up
I have the same machine, and in mine, the group (i think it's called?) takes a lot of effort to properly lock in place. Is that normal?
Does the machine stops when the coffee is ready automatically ? Or do you have to stop it?
The machine stops when the brew is done. It also has an auto turn off feature if you forget to power off the whole machine so it won't stay hot all day if you don't turn it off
For the double shot in this video what cup button did you select at the top?
I pressed the middle double shot button
What kind of coffee should I buy ?
I can't get the coffee holder part to go in, how do I do that?
i want this machine
Hi I have the model ec685 and i use the double shot until where should I fill it?
Just bought a Dedica, but as I tried to make the first real espresso today, the machine worked with huge sounds but then suddenly stopped. After unboxing yesterday, I already made four double-shots.. any help on that? Thx!
Mine makes a lot of loud rattling noises at the beginning before the espresso starts coming out. I put the whole machine on a dish towel and that helps a little bit , but it is normal to be loud at the start of the brew
Where did you get your espresso cups and what type of coffee beans do you recommend? Thanks
Hello, what are size of your cups when you brewed for 2 cups? My cups are 5 oz… will it work for them?
Thanks for this! I have the same espresso machine but mine just drips am I doing something wrong?
That can happen if you overpack the grounds, or if they are ground too fine.Or you could try putting a little less grounds in.
GoatToaster 9 That’s probably it thanks 😊
How do I fix it, when it seems like the pump is not pumping well; it has been completely cleaned. It seems like all home espresso machines work for 2-3 years, then have pump problems.
what is the daily clean up like? do you remove the portion cup and rinse then just rinse the cup with the handle?
Daily I'll leave the cup in the handle and rinse it out. About once a week or two I'll pull the handle out and rinse them separately to give them a good clean.
Can this make a regular americano too? Just plain coffee? Cause my grandparents are drinking only that, but I drink only latte and cappuccino :(
The machine keeps on blinking after you make a coffee, how do you make another coffee after that? Do you need to restart the machine every time? I am struggling to make multiple cups of coffee one after another?
What is up with the black plastic in the steel holders they give you? Woudnt they burn if the hot coffee is coming through it?
Sadly Amazon reviews indicate a recent high machine failure rate.
I went for the Breville Bambino Plus as it recently had a $100.00 price drop.
I've had the reverse... My new shiny Bambino died after only 7 months, so now I'm back to using the Dedica again. It's a pretty feeble machine but at least it still works, unlike the Breville.
Mine has had really mixed results - sometimes good like the ones you're making. Sometimes cold or weak. The coffee only comes out of one of the two exits. Wodering if it might be faulty...any thoughts?
It could be too fine of a grind on the coffee beans, or tamping too hard. You could take the stump apart to make sure nothing is blocking one of the exits. If the brew is taking over 20 seconds from first flow to finish, then it is probably too fine a grind or over tamping
Great 👌👌👌
I brought the same machine
It is just a great one
It really is great! I love how easily it makes great espresso!
Did your machine come with the frothing cup?
Mine didn't come with a frothing cup.