Be prepared to replace your rocker cover also 😂 mine was so stuck, I was using this tool, and the injector came out eventually with some serious pressure, upon celebrating, noticed the rocker cover had cracked in the process, but my engine did have severe black death! I have 0 mechanics experience but with the help ofthis video and many like it Ive been able to strip all the injectors out, out a new aluminium rocker cover on and 4 reconditioned injectors back in, runs a dream now 👌🏻 I was previously getting quite bad CO poisoning and now it's scent free
Nice alternative to a slidehammer. Would be even nice if it had a thread in the tellow collar so you could use it with a power/air tool instead of a wrench.
That was well demonstrated , my van Black Death was so bad the mechanic has spend 3 days on it and was only able to remove 1 , the other 3 won’t budge.
I'd suggest just loosening the bolt a bit, otherwise when the injector pops out it will bend the fuel pipe. Once the pipe is bent it can be impossible to get it to seal again. Also this method doesn't always pop an injector out.
My local garage needs to see this. Told them I’d seen it done on TH-cam. My car has been stuck in their workshop bay for 3 weeks right now. Into fourth week tomorrow.
Just got done doing mine. 1 came out easily by hand the others needed this tool and VICE GRIPS. Now to spend 500zl on regeneration. god dam diesels. Well, I got totally boned. 3 bolts snapped of in the head holding down these injectors. Mega disaster.
Be prepared to replace your rocker cover also 😂 mine was so stuck, I was using this tool, and the injector came out eventually with some serious pressure, upon celebrating, noticed the rocker cover had cracked in the process, but my engine did have severe black death! I have 0 mechanics experience but with the help ofthis video and many like it Ive been able to strip all the injectors out, out a new aluminium rocker cover on and 4 reconditioned injectors back in, runs a dream now 👌🏻 I was previously getting quite bad CO poisoning and now it's scent free
Nice alternative to a slidehammer. Would be even nice if it had a thread in the tellow collar so you could use it with a power/air tool instead of a wrench.
That was well demonstrated , my van Black Death was so bad the mechanic has spend 3 days on it and was only able to remove 1 , the other 3 won’t budge.
My mechanic said this, I looked myself and they hadn't tried, so now I'm doing them myself with this video 👌🏻😂
what tool is it please, brand reference?
Thanks, the small part was a mystery to me until now.
Oh yes, watch out for the tiny spring everyone!!!! Inside the cap.
How do you remove the 3 wing part from the injector?
where i work we just remove bolt that hold the injector. then we start the engine and wait for the puf
I'd suggest just loosening the bolt a bit, otherwise when the injector pops out it will bend the fuel pipe. Once the pipe is bent it can be impossible to get it to seal again. Also this method doesn't always pop an injector out.
How to calibrate the injectors when you put it back together
no, this is one way ticket
It's not the space shuttle.😁
quel produit utilisé pour nettoyer svp?
What model Mercedes was that..
Vito 2.2
My local garage needs to see this. Told them I’d seen it done on TH-cam. My car has been stuck in their workshop bay for 3 weeks right now. Into fourth week tomorrow.
Change work shop bro
@@tasoulis4426 will have to pull my car out of their car yard with a breakdown truck.
Just got done doing mine. 1 came out easily by hand the others needed this tool and VICE GRIPS. Now to spend 500zl on regeneration. god dam diesels. Well, I got totally boned. 3 bolts snapped of in the head holding down these injectors. Mega disaster.
Tap for M8 or M10, it works.
What is that mud doing there, that looks 🤢
This is the result of long time leaking injectors
Da asta se mișcă după iasă măi ușor
Was this car in Ukraine war ???
Burned and tosted?
🙂This is the result of long time leaking injectors
Do you realy think that your joke is funny?
Just normal diesel stuff