For anyone and everyone, whosoever is considering DIY, this is a great and simple display of practical, efficient, durable / long lasting roof. Don't let any of those negative comments keep you distracted. Great video. Thank you.
I have a bakery that I have patched the roof on for 25 years. Each year I got better. NOW I can put a new roof on because of your video. I watched most all of them. (No way my wife will go up there). This is my first comment ever. I have to let you know I appreciate your work.
Ya he made a lot of mistakes that may come back to haunt him. But, Im a bonified roofer. I had my license. Retired now. All you wanna be's give him a break! You know this man put a lot of confidence in people who needed an answer to their roof issue. He made it look easy and very entertaining. You guys know dam well this roof may never leak. He did some things you called out right away without remembering that the rain was coming. How would you have sealed that edge? By torching it! Wrong! He did it right cuz he had to come back to it. Good job, Ol man.
@@AlloyedFrequencies you stated that he made a lot of mistakes and you didn't mention a single one and then you say way to go, which is it? Name those mistakes Educate us.
Finally, a YT video with American contractors demonstrating the process, using materials available in the US market! I’m not necessarily “Made in America” for domestic products sake- just for some reason all the YT videos I get are from UK! I am gearing up to tackle my first EPDM garage very low slope roof. Joists, sheathing and roofing all gone south.
I friend of mine and I did a roll roofing job for my dad on and old rental dwelling in the rear of his former residence property here in SE Louisiana. It was very affordable and served the purpose for at least 15 years. It did have that mild slope you speak of. My dad made his Beer, Bread and Egg money from that little "Shack" in his retirement years.
when you do a new installation of peel and stick its a 3 layer process versus 2 and it's just as effective as torch if done properly. If you a layover is just a bandaid youll be really surpised how many homes make it 15-20 more years with a band aid.
I think that's kind of the idea given the title of the video. It's the old saying in business... "you can have it fast, right or cheap... and u can only pick 2." This was fast and cheap, not necessarily "right" according to pro-roofers. BUT, for a homeowner w a bad leak who is desperate for a fast & inexpensive solution (that doesn't necessarily need to last 10 years) this video is semi-helpful. I don't even have $2 to spend per square foot so I'm totally screwed. Was considering using 4x8 coroplast boards ( only cuz i have like 100 sheets just sitting in my garage) to go over the current roof (glued down). Then i want to tape the seams with EPDM tape and coat the entire surface with expoxy resin. Then put on new perimeter flashing. I realize I'm going to create more issues but I'm stuck and SOMETHING must be done ASAP. Unless some roofers want to donate their labor AND materials, I'm on my own. Water is a sinister foe!
Sorry it was not a bad try for doing yourself but it was inproper installation. As a roofer for 25 year I'll tell you what you did wrong. Before you lay out the base you have to apply primer which some roofer call glue, the second thing you did wrong was when you installed the cap sheet you have to stagger it from the base so the laps don't land on the same spot you had to cut the first roll of cap down the middle but I would have cut was the base so I could start with a full roll of the cap the way you did it if one of the laps fail the lap underneath it could fail to because of the trapped water. I don't know where you live but if you get winter weather that will be an issue.
Your installation on the pipe is wrong you are supposed to install a cone over the pipe then put a piece of base down on the cone then put you cap on and it would be in 2 piece s so it wouldn't look like garbage you lay out a piece to pass the pipe cut around it the next piece 6 inch overlap the other way on the pipe and it's good to go and looks nice too and don't forget to use asphalt primer on the cone
Allsand is meant as a last resort of large pipes that they don't make cone inserts for not a wash room pipe and your wash room vent pipe you should have risen it up that cap comes off and you should have built it up with 2 layer of 2by4 and flash it in with your base and cap sheet it you live in an area where it snows you are going to have problems
Great job Doc and company….to all the negative comments…. If he installed the previous part of the roof 20 years ago, and was called back to do the other part 20 years later that should indicate a satisfied customer!!!
I'm a certified flat roofer EPDM TPO cold process as well as slope roofs , most common repair i have done on similar roof systems is seams and perimeter not adhering. if you want to do this system invest in the seam sealant. you could also do a seal coat over the existing roof for a similar price. EPDM is my preferred system.
Great video.... I see 2 problems 1: you always have to cut your first run of S A base in half alway. To prevent a lap on lap Meaning when you run your cap sheet you're gonna have a lap on top of the other lap thats not good . Cutting your first run in half prevent this . 2 : You need to use an 80 pound roller . The roller is used to remove any air pockets that may be trapped in between the materials. In the summer when its hot the gasses starts to build up in the pockets causing the material bubble up or causing the material to separate in time .
Stepping on it and not pass the roll on it is the same thing and he also didn't use primer on the roof before he installed the base sheet some roofer call it glue
I have been roofing for 25 years. That type of roof is not made to be installed over an existing roof without an ISO panel or clean sub. It also needs to be rolled down with an 80 lb roller to bond materials. It specifically tells you not to use torch or flame. You are supposed to use a hot air gun. Its not a torch down system. It will def be a problem
Ok truther that's your third worning I'm not going to write you up this time though looks like we're going to need you tomorrow but mostly it's forcuz I am no longer read and rite be cause this video break me mind not work
I’m a commercial roofer. Have roofed some of the highest profile roofs on Earth. This guy’s a hack. So much hackery I legitimately don’t know where to begin.
@@primeworld1830 when you’re putting down a multi-million dollar roof on a hospital or a new skyscraper, there’s minimal hackery- people don’t get paid, warranties don’t get issued, if there’s any, so anything not to par is getting rectified.
Uh oh god forbids someone gets the job done for cheaper, as long my roof dont leak I'm good with it. This guy just embarrassed a whole industry really. He just laid down a great roof with just him and his wife and it didn't cost him 10 billion dollars....what lol
👍👍Minnesota, we get 20 to 25 years on this roof in harsh climates. We use EPDM rollers and a heat gun to weld seams together but I like the torch idea. Also nail base is a good product under the roll roofing for layovers.
This looks like a potentially AWESOME product. Clearly it has ease of APPLICATION. Next test is PERFORMANCE (i.e., no leaks) and then LONGEVITY. (Those are the three test and the final TEST or issue is PRICE.) $2 psf is very tolerable if the performance is good and the longevity is long.
Nice job! This is one of the best videos on the application of APP membranes. The video gives complete details right from the cleaning of site, application of Primer, Fixing of APP sheets with hot torch method & finishing with siliver paint.
Most counties of the USA allow a max of 2 layers to a flat roof (check with YOUR a county building Dept). After that you have to remove the old down to the plywood strata. Also, roofers comments indicate and 80 lb roller is needed to rollover the material.
Materials and Labor ! for roofs with complete tear outs and new roof can be 3x materials $5K will get you $15K final ! Always always get many bidders and learn from the bids !
Oh man I wish they sold shed felt here in the UK with that sticky backing on it. Tired myself out good yesterday painting bitumen on by hand then rolling felt over it!
@@rsz90182 Do you really need an explanation? And the list of things they fucked up is so long it can't be addressed in a comment. You would need another full length video. But for starters, in just the first 30 seconds, any time you install a roof over an existing roof you are doing it wrong.
Nice to see a new video. And how about you pros, working a five gallon tar bucket with clean hands! I have a flat roof with a slight pitch, so I’ll stay tuned. Y’all make it look easy. Thanks from Michigan.
I agree with Steven Gee. Also, you should NEVER run ur base seams within a minimum of 8 inches from ur cap seams. He is pretty much right on top of the base seams. That ruins the whole point/value of having a 2 plied roof. Now it’s basically just really thick single plied roof. JOKE!
That underlay is awesome not seen that in UK. The only worry i have is if the old roof was leaking anywhere there could be rotten boards under your new cap felt? I would always recommend a re board and felt where possible, What do i know you are the flat roof god haha love your videos thanks for the refresh i have one on next week unfortunately with a leak which most likely will need new boards fitting.
Great video, i have a 3-12 pitch roof with shingles is this too steep; will the shingles and under lament need to be removed before applying this peal and stick base and top?
I am in South Florida and this roof has to pass an inspection by a licensed roofing contractor to get insurance. While it looks simple, we do not know if this DIY approach will survive heavy winds, high heat, and torrential rains…sometimes all at the same time. I really wish it were this simple and affordable and appreciate the information, but the comments by roofers point out many potential problems with the installation.
In south Florida you're not allowed to put roll roofing over an existing roof layer. "TopShield Pro underlayment roofing systems membranes shall not be applied over an existing roof membrane."
@@jamescole3152 I don't need to show anything. I have been roofing all through the US. As a speacilst in government roofing. I don't need to prove a dam thing to you.
I enjoyed your video. Thank you for posting it. That said I have a couple of questions. I am about to venture into doing a roof in a commercial property of mine after I got quoted a ridiculous amount of money to either repair or install a new roof on a 4500 square feet roof top. On your video looks like to just put the new roof membranes atop the old roof. I was under the impression that the old membranes or old roof had to be removed? Please advice. Thank you very much . Sami
Great video Roof Doctor. you have inspired me to fix my mobile home roof. I was wondering if I could buy a few minutes of your time for a video call or phone call to let you see my situation and recommend what approach to take, be it peel and stick, torch down or some other kind of approach.
Hey, my question is what self adhering material would you use over torch down gutters on a home? I have one corner that leaks, but almost 30 years old & going strong.
Not everyone has a wife like yours and mine. Mine has always worked with me since we been married, we were were self employed all our life, married 50 years this year
I have a question about roofing, I have gotten several contractors over to give me estimate for replacement of the roof every last one wants to install edpm roof material over the current roof, ( old roof hot tar, last roof torch down bitumen) they all want to do only third roof of edpm . Why? Why won’t anyone remove the old roof fix the old Douglas Fir t&g decking and torch down two layers over fire resistant paper? Your demonstration of this project video is showing proof of why they don’t want to do any roof removal and repair. They can complete the entire job in one day. No old material to dispose of. No complicated process. Minor torch around the edges. Maximum return on their time. My flat roof is pitched both sides to the middle and a scupper with a drain pipe in the center. Where can I obtain the materials from your video? I’m not about to do the work myself but it’s possible with some help to complete the project in a day and complete the flashing process without worrying about complicated step flashing or anything else. Thank you.
EPDM is the worst type of roofing material do have on a roof. You are correct in all the other points. You can hire a few handy guys and have then do your roof with little cost. No need to strip the old roof.
Sometimes Home Depot will carry the Liberty Brand od Peel and Stick. But any roofing supply place carry this material. Beacon Building Supply, ABC Roofing Supply or any other local roofing supply place. The Brand does not really matter.
Reject those bids and keep requiring your specifications only ! Many regions of the country have bad contractors ! Break down the roof work scope into, tear down demo, roof repairs if any then actual new roof area if any ! Doc is right you can re-layer if needed ! Keep calling for free and sane estimates only ! Good handymen with insurance bond can do small if needed !
Do u have a list of everything u used and where u possibly bought everything u used. I live in Pennsylvania and am not sure where to buy everything we need and need to know how to extend our roof out to add gutters to our lower deck
Yes but there is a speciality trowel and a 7 gallon bucket of Elmer's glue sold by a second company but you have to be a preferred contractor licensed and insured
TopShield SBS. Not only is the base layer required, but you're not supposed to install the system directly onto an existing roof. Good product, cheapo installation.
Why are you laying the runs across the roof? Why no lengthways? Plus, would it not be better to have done the flat roof first, then the parapets, to achieve proper weathering?
*QUESTION: Wouldn't it be easier & cheaper to use liquid rubber, and the sprinkle it with fine gravel for the UV protection?* There would be no seams, and would save a ton of time/labor.
@@thomasg4324 It depends a lot on thr country. In the UK there are a few other methods that are being used. One of them is EPDM, which is a rubber membrane that comes in one sheet (up to a certain size) and you glue it to your substrate(mainly timber frame). There are also liquid rubber methods that are being used but there's just something about them that makes it a bit more not trustworthy especially when compared to a one sheet option such as EPDM. Also, in terms of longevity, EPDM can easily last 50+ years.
What is cashier over the rubber? Water shield ? I'm in WI shop Nenards. Trying do mobile home addition with flat roof. How do I get rubber roll up on roof by myself?
Hi, my name is Vick, I leave in North East Maryland, I have a flat roof with TPO material, it's old and starting to lick every time when is raining, what you suggested to do ? Can I use the same materials you were using on this video ? What should I do with the existing TPO ? Can I install on top of that or I have to pull all off ? Please let me know. Thank you so much.
According to what little you have stated it sounds likely that the roof in question should be torn off and stripped down to the deck of all old materials and any rotten plywood decking removed and replaced with new before a new roof is installed. If you have had substantial leaks then there will be moisture trapped between the old roof and the new roof (wet insulation board & rotting plywood) creating water vapor which must escape and will only cause further damage to the ceiling underneath ( stains, paint blistering, bubbling, peeling, mold) and bubbling, blistering and eventually compromising the roof above for more leaks. You could potentially use a peel & stick base sheet over a mechanically fastened 1/2"×4'x8' insulated sheet of blackboard on the deck followed by a granulated peel & stick cap sheet but the devil is in the details (i.e. penetrations (pipes, skylights, drains, tie-ins to other roof systems & perimeter terminations (i.e. shingles, metal, wall flashing & metal drip edge, etc.) and this video is not a good representation of the proper application process. My advice is to research the proven work history of licensed & bonded roofing professionals in your area and get several quotes on a peel & stick replacement roof and go from there.
For anyone and everyone, whosoever is considering DIY, this is a great and simple display of practical, efficient, durable / long lasting roof. Don't let any of those negative comments keep you distracted. Great video. Thank you.
I really love how simple this roof material goes down
I have a bakery that I have patched the roof on for 25 years. Each year I got better. NOW I can put a new roof on because of your video. I watched most all of them. (No way my wife will go up there). This is my first comment ever. I have to let you know I appreciate your work.
That is awesome!
Yeah, wish I have one of those wife tools😉 very nice video. 👍
Having a bakery your probably great at spreading frosting roofing is almost the same
The lord parts with knowledge in many ways young jedi. These are not the roofs you are looking for
I doubt it
What great honor his son brings to his dad! Beautiful! God bless you and yours!
Ya he made a lot of mistakes that may come back to haunt him. But,
Im a bonified roofer.
I had my license.
Retired now.
All you wanna be's give him a break! You know this man put a lot of confidence in people who needed an answer to their roof issue. He made it look easy and very entertaining.
You guys know dam well this roof may never leak. He did some things you called out right away without remembering that the rain was coming. How would you have sealed that edge? By torching it! Wrong! He did it right cuz he had to come back to it.
Good job, Ol man.
yeah it looks really nice
Your comment is clear as mud.
@@info411 no it’s your fault. You don’t do roofing
@@AlloyedFrequencies you stated that he made a lot of mistakes and you didn't mention a single one and then you say way to go, which is it? Name those mistakes Educate us.
It’s not gna leak here on this roof 👍🏻👍🏻
Finally, a YT video with American contractors demonstrating the process, using materials available in the US market! I’m not necessarily “Made in America” for domestic products sake- just for some reason all the YT videos I get are from UK! I am gearing up to tackle my first EPDM garage very low slope roof. Joists, sheathing and roofing all gone south.
Thank you sir now im ready to be a certified roofer
Thanks for the laugh.
I friend of mine and I did a roll roofing job for my dad on and old rental dwelling in the rear of his former residence property here in SE Louisiana. It was very affordable and served the purpose for at least 15 years. It did have that mild slope you speak of. My dad made his Beer, Bread and Egg money from that little "Shack" in his retirement years.
I automatically liked your video because your wife is doing all the work lol
My man is killing all the capitalist roofing cos. Good Job Flat Roof Doctor👍👍👍👍👍👍👍👍👍👍👍
This job is one giant bandaid ,reminds me of when I had to patch a hole on the inner tube of my bicycle.
when you do a new installation of peel and stick its a 3 layer process versus 2 and it's just as effective as torch if done properly. If you a layover is just a bandaid youll be really surpised how many homes make it 15-20 more years with a band aid.
I think that's kind of the idea given the title of the video. It's the old saying in business... "you can have it fast, right or cheap... and u can only pick 2." This was fast and cheap, not necessarily "right" according to pro-roofers. BUT, for a homeowner w a bad leak who is desperate for a fast & inexpensive solution (that doesn't necessarily need to last 10 years) this video is semi-helpful.
I don't even have $2 to spend per square foot so I'm totally screwed. Was considering using 4x8 coroplast boards ( only cuz i have like 100 sheets just sitting in my garage) to go over the current roof (glued down). Then i want to tape the seams with EPDM tape and coat the entire surface with expoxy resin. Then put on new perimeter flashing. I realize I'm going to create more issues but I'm stuck and SOMETHING must be done ASAP. Unless some roofers want to donate their labor AND materials, I'm on my own. Water is a sinister foe!
@@Jimd905Well, he just spent $6,500 on materials that are bound to fail within a year or two. Doesn't seem very economical to me.
Maybe he’s going to sell the house right away?
Sorry it was not a bad try for doing yourself but it was inproper installation. As a roofer for 25 year I'll tell you what you did wrong. Before you lay out the base you have to apply primer which some roofer call glue, the second thing you did wrong was when you installed the cap sheet you have to stagger it from the base so the laps don't land on the same spot you had to cut the first roll of cap down the middle but I would have cut was the base so I could start with a full roll of the cap the way you did it if one of the laps fail the lap underneath it could fail to because of the trapped water. I don't know where you live but if you get winter weather that will be an issue.
Your installation on the pipe is wrong you are supposed to install a cone over the pipe then put a piece of base down on the cone then put you cap on and it would be in 2 piece s so it wouldn't look like garbage you lay out a piece to pass the pipe cut around it the next piece 6 inch overlap the other way on the pipe and it's good to go and looks nice too and don't forget to use asphalt primer on the cone
You didn't need to you plastic cement on the seams to make it watertight all you had to do was pass you roofing touch on the seams
Allsand is meant as a last resort of large pipes that they don't make cone inserts for not a wash room pipe and your wash room vent pipe you should have risen it up that cap comes off and you should have built it up with 2 layer of 2by4 and flash it in with your base and cap sheet it you live in an area where it snows you are going to have problems
@@migueldefreitas1367 if you have a roof with tar and gravel (flat) do you need to scrap It up before doing this process to it?
No you can put down what roofers call protection board first and screw it down to the existing roof
Great job Doc and company….to all the negative comments…. If he installed the previous part of the roof 20 years ago, and was called back to do the other part 20 years later that should indicate a satisfied customer!!!
Can this be used on a brand new plywood sheeting sloped roof?
Great video. I just need a wife who will go up there because mine wont!!! 😁
People who work together,....................stay together. Great work!!! Excellent content! Thank you!
I'm a certified flat roofer EPDM TPO cold process as well as slope roofs , most common repair i have done on similar roof systems is seams and perimeter not adhering. if you want to do this system invest in the seam sealant. you could also do a seal coat over the existing roof for a similar price. EPDM is my preferred system.
Which seam sealant do you recommend?
Nice to see your son with you.
can you provide me with the name of each of the rolls you used on these jobs. thank you.
I think the part where you torched and glued will leak overtime. The proper way is to install the ridge and overlap the tarp.
good video but that is 1 part was a very bad instruction...
Great video.... I see 2 problems
1: you always have to cut your first run of S A base in half alway. To prevent a lap on lap Meaning when you run your cap sheet you're gonna have a lap on top of the other lap thats not good . Cutting your first run in half prevent this .
2 : You need to use an 80 pound roller . The roller is used to remove any air pockets that may be trapped in between the materials. In the summer when its hot the gasses starts to build up in the pockets causing the material bubble up or causing the material to separate in time .
He mentions the roller at 21:10 but they step on it instead.
Stepping on it and not pass the roll on it is the same thing and he also didn't use primer on the roof before he installed the base sheet some roofer call it glue
@@migueldefreitas1367 yeah I s
I was thinking to myself as she's takes off the plas
😊
I have been roofing for 25 years. That type of roof is not made to be installed over an existing roof without an ISO panel or clean sub. It also needs to be rolled down with an 80 lb roller to bond materials. It specifically tells you not to use torch or flame. You are supposed to use a hot air gun. Its not a torch down system. It will def be a problem
Ok truther that's your third worning I'm not going to write you up this time though looks like we're going to need you tomorrow but mostly it's forcuz I am no longer read and rite be cause this video break me mind not work
He's going to roll his imported wife over it
I think it's time the old Doc retires !
Well the roof doctor has been doing this for much longer than you. His way must work.
Ok Karen!! Lol
I’m a commercial roofer. Have roofed some of the highest profile roofs on Earth. This guy’s a hack. So much hackery I legitimately don’t know where to begin.
Roofing business is itself a hack to make recurring money! Isn't it?
@@primeworld1830 when you’re putting down a multi-million dollar roof on a hospital or a new skyscraper, there’s minimal hackery- people don’t get paid, warranties don’t get issued, if there’s any, so anything not to par is getting rectified.
Dude you roofers are thieves, I think they teach you how to ruin mfkrs as an apprentice. Labor, materials cost 5k you charge 20k
Uh oh god forbids someone gets the job done for cheaper, as long my roof dont leak I'm good with it. This guy just embarrassed a whole industry really. He just laid down a great roof with just him and his wife and it didn't cost him 10 billion dollars....what lol
@@wolfywolf420 he laid down a sh*t roof
👍👍Minnesota, we get 20 to 25 years on this roof in harsh climates. We use EPDM rollers and a heat gun to weld seams together but I like the torch idea. Also nail base is a good product under the roll roofing for layovers.
whats that ??? nail base??? u mean hammering nails also down. ???
What a beautiful couple nice job guys keep doing your great videos
I'm a potter and I got the knowledge how to do my own roof now thanks 😉
That's great!
This looks like a potentially AWESOME product. Clearly it has ease of APPLICATION. Next test is PERFORMANCE (i.e., no leaks) and then LONGEVITY. (Those are the three test and the final TEST or issue is PRICE.) $2 psf is very tolerable if the performance is good and the longevity is long.
I love it. I think I have to wait until spring the weather is too cold and rainy right now.
Nice job! This is one of the best videos on the application of APP membranes. The video gives complete details right from the cleaning of site, application of Primer, Fixing of APP sheets with hot torch method & finishing with siliver paint.
I can almost taste the paint but I'm not at work yet so I will have to wait
This is an SBS membrane, not APP. See the bill of sale at 1:09. Also Top Shield states that their SBS membranes are not to be torch applied.
Wow! I am having a roof put on soon. I am going to help thanks to this video!
LOL - LOL - LOL - LOL
How very puny of you
Most counties of the USA allow a max of 2 layers to a flat roof (check with YOUR a county building Dept). After that you have to remove the old down to the plywood strata. Also, roofers comments indicate and 80 lb roller is needed to rollover the material.
thank you I'm going to do my roof just like this , I got a estimate for 10,000 that's a eye 👀 opener
Materials and Labor ! for roofs with complete tear outs and new roof can be 3x materials $5K will get you $15K final ! Always always get many bidders and learn from the bids !
always lay a upside down nailed sheet around edges
Our crew always leaves extra nails for the next couple
fantastic video! you guys are class acts!!!
Thanks for the video my friend❤
Very nice video, it will help me in the roof of my farm house , with love from Silchar ,India.
Great 👍
Oh man I wish they sold shed felt here in the UK with that sticky backing on it. Tired myself out good yesterday painting bitumen on by hand then rolling felt over it!
This is like a master class in how NOT to install a roof...
I so agree! But they will call us haters. I don't know what kind of Dr. he is, but surly not a roof Dr.
Not haters, just jealous couch potatoes without any explanations.
@@rsz90182 Do you really need an explanation? And the list of things they fucked up is so long it can't be addressed in a comment. You would need another full length video. But for starters, in just the first 30 seconds, any time you install a roof over an existing roof you are doing it wrong.
can this be installed over a metal roof?
As a 35 year roofing expert, I would not recommend it.
Yes, if you like throwing money away.
@@shawncummings4653 thank you.
Thank You for this information. I will watch 20 more TH-cam instructional videos and compare techniques.
Be careful up there.
Thank you for so much for sharing, my question is that you don't need to take out of the old membrane ?
Ok Alexa turn off but first say th least intelligent video you sell me more about college
Nice to see a new video. And how about you pros, working a five gallon tar bucket with clean hands! I have a flat roof with a slight pitch, so I’ll stay tuned. Y’all make it look easy. Thanks from Michigan.
It is really that easy. my wife and I did that very fast
Yea man it's easy to keep those hands kleen just never touch it
May God bless you both and thank you so much for sharing your information.
Great stuffs! Thanks Doc. Immensely enjoyed it (what about the silverly UV protectant at the end?)
Good video . How do ya know if you are allowed to add another layer ? What if a couple already ? Are there rules ? Thanks
Thank you to share your experience. Professional.
As a highly and I express high I and fellow transient workers recommend putting two roofs on this immediately to ensure success best of luck fellows
I like the whole process. I am in kenya how can I get this materials?. Do you have an agent
So the pipes can I just place boots to them for extra protection? Also where did you buy the torch?
I agree with Steven Gee. Also, you should NEVER run ur base seams within a minimum of 8 inches from ur cap seams. He is pretty much right on top of the base seams. That ruins the whole point/value of having a 2 plied roof. Now it’s basically just really thick single plied roof. JOKE!
Absolutely never seem on seem. This is beyond a joke.
That underlay is awesome not seen that in UK. The only worry i have is if the old roof was leaking anywhere there could be rotten boards under your new cap felt? I would always recommend a re board and felt where possible, What do i know you are the flat roof god haha love your videos thanks for the refresh i have one on next week unfortunately with a leak which most likely will need new boards fitting.
I think the roof was made of Twin-T's (concrete)
Wait for the video old wood doesn't rot in the end,try to keep up before you get fired
How much does a roll weigh? Would that work for a Florida room?
Great video, i have a 3-12 pitch roof with shingles is this too steep; will the shingles and under lament need to be removed before applying this peal and stick base and top?
I am in South Florida and this roof has to pass an inspection by a licensed roofing contractor to get insurance. While it looks simple, we do not know if this DIY approach will survive heavy winds, high heat, and torrential rains…sometimes all at the same time. I really wish it were this simple and affordable and appreciate the information, but the comments by roofers point out many potential problems with the installation.
Just wait for terrible weather and then do a.i. 45 minutes video on just how good it not being
In south Florida you're not allowed to put roll roofing over an existing roof layer. "TopShield Pro underlayment roofing systems membranes shall not be applied over an existing roof membrane."
Truthfully as a 35 year roofer I would not put this on a dog house. Just my opinion.
@@shawncummings4653 Show us your video then. This guy has been doing this for many years with no problems.
@@jamescole3152 I don't need to show anything. I have been roofing all through the US. As a speacilst in government roofing. I don't need to prove a dam thing to you.
I enjoyed your video. Thank you for posting it. That said I have a couple of questions. I am about to venture into doing a roof in a commercial property of mine after I got quoted a ridiculous amount of money to either repair or install a new roof on a 4500 square feet roof top. On your video looks like to just put the new roof membranes atop the old roof. I was under the impression that the old membranes or old roof had to be removed? Please advice. Thank you very much . Sami
Great video Roof Doctor. you have inspired me to fix my mobile home roof. I was wondering if I could buy a few minutes of your time for a video call or phone call to let you see my situation and recommend what approach to take, be it peel and stick, torch down or some other kind of approach.
What is the underlayment/membrane you're using under that liberty roof roll?
This is an amazing video. Thanks for posting.
I have Henry 887tropi cool silicone put on flack roof but have some bubbles how do I fix still use silicone or use different material
You really have a great wife there two people makes it so much easier working together in life
Hey, my question is what self adhering material would you use over torch down gutters on a home? I have one corner that leaks, but almost 30 years old & going strong.
Thank you. Where can I buy super silicon sealant?
Would really like to know what the material you used?
Put the adhesive on a rag inhale and you will figure it right out
Mujer trabajadora 👏👏👏
Thanks for the video, I just learned how to get plastic roof cement out of the bucket, and on the trowel better, watching the son...
what about a flat roof? mine has no slope at all.
Not everyone has a wife like yours and mine. Mine has always worked with me since we been married, we were were self employed all our life, married 50 years this year
I am so sorry
What Rubber Roof brand to you recommend?
I have a question about roofing, I have gotten several contractors over to give me estimate for replacement of the roof every last one wants to install edpm roof material over the current roof, ( old roof hot tar, last roof torch down bitumen) they all want to do only third roof of edpm .
Why?
Why won’t anyone remove the old roof fix the old Douglas Fir t&g decking and torch down two layers over fire resistant paper?
Your demonstration of this project video is showing proof of why they don’t want to do any roof removal and repair.
They can complete the entire job in one day.
No old material to dispose of.
No complicated process.
Minor torch around the edges.
Maximum return on their time.
My flat roof is pitched both sides to the middle and a scupper with a drain pipe in the center.
Where can I obtain the materials from your video?
I’m not about to do the work myself but it’s possible with some help to complete the project in a day and complete the flashing process without worrying about complicated step flashing or anything else.
Thank you.
EPDM is the worst type of roofing material do have on a roof. You are correct in all the other points.
You can hire a few handy guys and have then do your roof with little cost. No need to strip the old roof.
Sometimes Home Depot will carry the Liberty Brand od Peel and Stick. But any roofing supply place carry this material. Beacon Building Supply, ABC Roofing Supply or any other local roofing supply place. The Brand does not really matter.
Reject those bids and keep requiring your specifications only ! Many regions of the country have bad contractors ! Break down the roof work scope into, tear down demo, roof repairs if any then actual new roof area if any ! Doc is right you can re-layer if needed ! Keep calling for free and sane estimates only ! Good handymen with insurance bond can do small if needed !
Do u have a list of everything u used and where u possibly bought everything u used. I live in Pennsylvania and am not sure where to buy everything we need and need to know how to extend our roof out to add gutters to our lower deck
Great vid where can I buy that material,I'm in Florida
Great video I enjoy Watching your wife; son and you working together Congratulations
YOU HAVE 3 STARS!!!!!
I put one under where under lament should be
Wonderful video. Excellent.
Many thanks!
Hi, can you use this type of roofing on shed roof or do I have to use asphalt 3 shingles? Thanks
Can cap sheet handle foot traffic?
Thanks for the video
Will this material and system work in harsh climates with wind had snow?
Could you please post the list of all materials needed to purchase from this video.
Plz explain how to make pitch
What products do you use? What about the sides?
Can I roll it over a flat roof that already has elastamoric coating?
Where can I buy material. Have 35x40 flat roof. Please help, Thanx
Good overall but no flashing? And I say invest in a 80 lb roller and dog ear the corners on the over lap you got this doc
I just took a selfy of my flashing on the roof hang on I'm still posting the pics
Did he remove the old roof membranes before placing the red backing pieces?
EXCELLENT VIDEO!!!!
Was that TOILET PAPER you used for the flashing ?
Polyester Fleece
Yes but there is a speciality trowel and a 7 gallon bucket of Elmer's glue sold by a second company but you have to be a preferred contractor licensed and insured
The Catalina wine mixer
Wait. They are trying to hide some &$"$$$#
Where u guys located
You guys are awesome
Great job Dr. and Gracias for the Tips looks to easy I'll find out tomorrow GOD BLESS YOU
Thank you for your video. You should careful not to burn down the roof, right?
Pig skiner
Hie do you ship these materials to Zimbabwe
sorry, they don't ship outside of the US
Not available in most countries please check your iq
amazing, thank you so much❤❤❤
Link to roofing material? And is the bottome layer required?
TopShield SBS. Not only is the base layer required, but you're not supposed to install the system directly onto an existing roof. Good product, cheapo installation.
Why are you laying the runs across the roof? Why no lengthways? Plus, would it not be better to have done the flat roof first, then the parapets, to achieve proper weathering?
*QUESTION: Wouldn't it be easier & cheaper to use liquid rubber, and the sprinkle it with fine gravel for the UV protection?* There would be no seams, and would save a ton of time/labor.
Degrades too quickly, cracks, splits, etc.
@@thatguy4234
Not tar...liquid rubber.
@@thomasg4324 It depends a lot on thr country. In the UK there are a few other methods that are being used. One of them is EPDM, which is a rubber membrane that comes in one sheet (up to a certain size) and you glue it to your substrate(mainly timber frame). There are also liquid rubber methods that are being used but there's just something about them that makes it a bit more not trustworthy especially when compared to a one sheet option such as EPDM. Also, in terms of longevity, EPDM can easily last 50+ years.
It would be much faster and cheaper to use spray on emulsion with pea gravel.
@@shawncummings4653
How much cheaper? Are you suggesting liquid rubber, or tar?
Can I use Tri Built Granular Surface Self Adhering Underlayment as a Base layer before the Torch Down ?
I do that many times and it works good
What is cashier over the rubber? Water shield ? I'm in WI shop Nenards. Trying do mobile home addition with flat roof. How do I get rubber roll up on roof by myself?
Hi, my name is Vick, I leave in North East Maryland, I have a flat roof with TPO material, it's old and starting to lick every time when is raining, what you suggested to do ? Can I use the same materials you were using on this video ? What should I do with the existing TPO ? Can I install on top of that or I have to pull all off ? Please let me know. Thank you so much.
According to what little you have stated it sounds likely that the roof in question should be torn off and stripped down to the deck of all old materials and any rotten plywood decking removed and replaced with new before a new roof is installed.
If you have had substantial leaks then there will be moisture trapped between the old roof and the new roof (wet insulation board & rotting plywood) creating water vapor which must escape and will only cause further damage to the ceiling underneath ( stains, paint blistering, bubbling, peeling, mold) and bubbling, blistering and eventually compromising the roof above for more leaks.
You could potentially use a peel & stick base sheet over a mechanically fastened 1/2"×4'x8' insulated sheet of blackboard on the deck followed by a granulated peel & stick cap sheet but the devil is in the details (i.e. penetrations (pipes, skylights, drains, tie-ins to other roof systems & perimeter terminations (i.e. shingles, metal, wall flashing & metal drip edge, etc.) and this video is not a good representation of the proper application process.
My advice is to research the proven work history of licensed & bonded roofing professionals in your area and get several quotes on a peel & stick replacement roof and go from there.
20 years old roof finish looks absolutely UV Stable
Where do you purchase the materials
Hello sir what is the name of the materials and from where can I get them ?