If minor problem you may use shoe-fix or all-fix solution (or fevicol SR-998). If major problem, then buy a new belt from amazon. It is available for about 1500-2000 rs.
Thank you so much Sir for your appreciation. I am a simple user and don't have enough knowledge on different models. I suggest you to compare in amazon.
Yes Mr Singh, you are right. that is fevicol synthetic rubber adhesive. Out of all different available glues this one works best with treadmill rubber belt. Mine is working fine after repairing and I am using daily during this corona period.
@Sagar Singh sorry sir for late reply. If the belt is not aligned properly or the person will walk giving pressure on one side then the sides will wear out. If there is dirt between the belt and board then the belt cloth will wear out. It is important to keep the belt clean. Spray helps little bit- say 20% to reduce the friction between belt and board. 😍😍❤️❤️
Brother, mena galti se treadmill use karta time incline ma he stop kar diya aur wo incline ma stuck ho gya hai, aur abb start nhi ho rha hai kuch error aa rha hai , kesa thik hoga, please reply🙏
I am not able to visualize the exact problem.. please check whether power is coming to machine or not through indicators.. If power not coming then check for loose connection near the main plug.. try to remove the cable and re-plug.. If power is coming and motor not moving.. then there may be problem in switch panel/ cables/ connectors..
Please check where the noise is coming from. It is possible that the belt is misaligned and may be touching the side guard and causing noise. In that case you have to align the belt properly. It is possible that the cloth under the belt is removed from the rubber and therefore causing noise. In that case you have to put adhesive between the cloth and rubber. It may be because of dust and friction which can be solved by applying some spray. Thanks for watching the video. 🙏👌🙏
You have to press two switches together to change different settings. The exact process will be there in the manual. However, I dont have much experience. I am using low priced/basic models and dont have that feature.
1. when the belt becomes old it becomes weak.. 2. if you tighten the belt too much then rubber gets extended and weak. 3. if there is mis-alignment then one side of the rubber gets damaged. 4. if there is dust and dirty things that will create more friction and put more pressure on the belt. 5. if your weight is more than belt capacity then belt gets stuck periodically and you tend to tighten it more. And so on.. You can imagine the rest of the conditions 😄😄😄😄
Some people walk imbalanced/tilted and the belt tends to move one side or other.. besides if you hold by just one hand then the belt will move to one side.. that damages the side of the belt. From my experience (you may try out) If you hold only by right hand then the belt will move to the left side and if you hold only by left hand then the belt will move to the right side. That is because holding by one hand makes body weight unevenly distributed between left and right. 😄😄😄😄
Thank you Sagar ji for watching the video.🌷🌷🌷 I spray about once in a month. But you may spray once in a week- depending on usage, dust/dirt and the friction you feel on the belt. 😍😍
Reduce the friction to reduce heating, Clean dusts inside belt with damp cloth, remove if any sticky substance, spray little bit treadmill silicone oil under the belt, Thank you so much for watching 😊😊🙏🙏
Spray helps reducing the friction between the belt and the board.. If the house environment is clean and machine is smooth then no need to put the spray. I suggest to clean the inner side of the belt with damped cloth periodically which will pull out the dirt. if there is too much friction- that means the belts sticks with the board when you put you leg- then it is better to put the spray under the belt to reduce the friction..
Error 2 may be for overload or high friction, I don't know exactly, the manual of the machine may say it correctly. I have never come across any such errors. thank you so much Jeetu ji.
I hope you have already tried aligning but still it is giving that problem. Sometimes the side of the belt is worn out and it does not have enough strength to hold the belt at the center. You may have to repair/change the belt. Please watch my belt repairing video. If it happens for one person and does not happen for another person then probably the body is not properly balance during walking. You may try balancing your body to center at the center. An interesting experience- while walking if you hold the handle only with your left hand and leave the right hand hanging then the belt will move to right and vice versa. Please apply this knowledge while walking to keep the belt at the center. 🙏🌹🙏
Where the sound is coming from? Motor, Belt or somewhere else? If It is from the board and belt you may spray some lubricant. If it is touching the side because of misalignment, you may align the belt. I am not a mechanic, but I have gained good experience after using treadmills for about 20 years.
![일상 속 기분 좋음 [Proto disco meme]](http://i.ytimg.com/vi/DwmEIaZ7XGQ/mqdefault.jpg)
You have given me confidence. I will try to service my treadmill myself. Thank you Mishra Ji
Great video. Thank you!
Proper legend you are! Thanks for the upload 😊
Thank you so much.
Super.. trouble shooting.. appreciate it
Thank you so much for watching and appreciating 😍😍 🌷🌹🙏
Treadmill ke belt par warranty milti hai?
Thank you sir for your advice and I will see your more videos. Thank you sir
So nice of you my dear friend 😊😊 ❤️❤️🌸🌸🙏
@@UmakantMishra इसका पीसीबी कार्ड मिल जाएगा
Good job sir that helps alot thanks 🙏
Thanks a lot my dear friend..
Very cery awesome man i like 👍🏻
Thank you so much👍
Sir my treadmill belt got creased now I want to repair, need your advice.
You can buy extra trademill belt on march
If minor problem you may use shoe-fix or all-fix solution (or fevicol SR-998). If major problem, then buy a new belt from amazon. It is available for about 1500-2000 rs.
excellent video 👌👍
thank you so much 😀
Joy Ho. Gurudev ho Aap. 🙏🙏. Can you advice me a treadmill for my daily use that will last long under 40,000. I only walk for about 1 hour. I am 70 Kg.
Thank you so much Sir for your appreciation. I am a simple user and don't have enough knowledge on different models. I suggest you to compare in amazon.
Thank you sir for this information .
So nice of you my dear friend.. Your comments encourage me a lot 😄😄😄😄🙏🙏
Informative video
So nice of you. This means a lot to me.
Thank you so much.
Thanks bro its help stayfit
Thank you so much 😔🌷🙏
Sir, I have to ask one thing. that is fevicol synthetic rubber adhesive
Yes Mr Singh, you are right. that is fevicol synthetic rubber adhesive. Out of all different available glues this one works best with treadmill rubber belt. Mine is working fine after repairing and I am using daily during this corona period.
Thank you sir for this information .
Sir, I had to ask one more thing. why this problem arises on the belt.
And sir if I will not use spray then sir what will problem arises
@Sagar Singh sorry sir for late reply. If the belt is not aligned properly or the person will walk giving pressure on one side then the sides will wear out. If there is dirt between the belt and board then the belt cloth will wear out. It is important to keep the belt clean. Spray helps little bit- say 20% to reduce the friction between belt and board. 😍😍❤️❤️
Brother, mena galti se treadmill use karta time incline ma he stop kar diya aur wo incline ma stuck ho gya hai, aur abb start nhi ho rha hai kuch error aa rha hai , kesa thik hoga, please reply🙏
I am not able to visualize the exact problem..
please check whether power is coming to machine or not through indicators.. If power not coming then check for loose connection near the main plug.. try to remove the cable and re-plug..
If power is coming and motor not moving.. then there may be problem in switch panel/ cables/ connectors..
Sir my treadmill is running tight and giving lot of consistent noise
Please help me to correct it.
Please check where the noise is coming from. It is possible that the belt is misaligned and may be touching the side guard and causing noise. In that case you have to align the belt properly. It is possible that the cloth under the belt is removed from the rubber and therefore causing noise. In that case you have to put adhesive between the cloth and rubber. It may be because of dust and friction which can be solved by applying some spray.
Thanks for watching the video. 🙏👌🙏
Sir can you please tell how to reset oil change symbol after lubrication..
You have to press two switches together to change different settings. The exact process will be there in the manual.
However, I dont have much experience. I am using low priced/basic models and dont have that feature.
Sir, I had to ask one more thing. why this problem arises on the belt.
1. when the belt becomes old it becomes weak.. 2. if you tighten the belt too much then rubber gets extended and weak. 3. if there is mis-alignment then one side of the rubber gets damaged. 4. if there is dust and dirty things that will create more friction and put more pressure on the belt. 5. if your weight is more than belt capacity then belt gets stuck periodically and you tend to tighten it more. And so on.. You can imagine the rest of the conditions 😄😄😄😄
Some people walk imbalanced/tilted and the belt tends to move one side or other.. besides if you hold by just one hand then the belt will move to one side.. that damages the side of the belt. From my experience (you may try out) If you hold only by right hand then the belt will move to the left side and if you hold only by left hand then the belt will move to the right side. That is because holding by one hand makes body weight unevenly distributed between left and right. 😄😄😄😄
Sir how many days should we spray?
Thank you Sagar ji for watching the video.🌷🌷🌷 I spray about once in a month. But you may spray once in a week- depending on usage, dust/dirt and the friction you feel on the belt. 😍😍
Thank you sir for this information
Treadmillka trackbohat garam ho rah ha usy k c repir karey gy kindly guide
Reduce the friction to reduce heating,
Clean dusts inside belt with damp cloth, remove if any sticky substance, spray little bit treadmill silicone oil under the belt,
Thank you so much for watching 😊😊🙏🙏
And sir if I will not use spray then sir what will problem arises
Spray helps reducing the friction between the belt and the board.. If the house environment is clean and machine is smooth then no need to put the spray. I suggest to clean the inner side of the belt with damped cloth periodically which will pull out the dirt.
if there is too much friction- that means the belts sticks with the board when you put you leg- then it is better to put the spray under the belt to reduce the friction..
You may buy a spray for 300 rs from amazon which will go for 5-10 years. 😄😄😄 Please watch my other videos ❤️❤️🌺🌺🙏🙏
Sir curv treidmill ka bhi banao na pls
Thank you so much
Alankey size kese pata kera mere kinetic ki tradmill ha
mine is 5mm. I dont know about kinetic. You may buy a set form amazon.
www.amazon.in/DECKER-BDHT81593-8-Piece-Maintenance-Warranty/dp/B07L8Q9LCT
Helpful 👌
Glad to hear that, Thank you very much 😀😀
What is the power of motor
Motor power is 740 watt. Good for personal use.. Thank you for watching 🙂🙏
Kitne ki mil Sakti he moter
Error 2. Bta rha h kya problem h sir ji
Error 2 may be for overload or high friction, I don't know exactly, the manual of the machine may say it correctly. I have never come across any such errors. thank you so much Jeetu ji.
Sar mere treadmil belt one side ghum jate h
Setting thek kese kre
I hope you have already tried aligning but still it is giving that problem.
Sometimes the side of the belt is worn out and it does not have enough strength to hold the belt at the center. You may have to repair/change the belt. Please watch my belt repairing video.
If it happens for one person and does not happen for another person then probably the body is not properly balance during walking. You may try balancing your body to center at the center.
An interesting experience- while walking if you hold the handle only with your left hand and leave the right hand hanging then the belt will move to right and vice versa. Please apply this knowledge while walking to keep the belt at the center. 🙏🌹🙏
meri treadmill ka belt move nh kar rha
Moter kitne ki mil Sakti he
Motor is costly as you can check in amazon. It will be cheaper to buy a second hand treadmill with good motor 😘😘
Hi sar na ట్రెడ్మిల్ ఇస్ not working
Thank you for watching the video.
Could you please provide somebody's contact details in jalgaon for repairing treadmill
Sorry Nandlal ji. I have no idea about that.
You may give a search in google.
Pls help me
Thank you a lot. Please watch my other treadmill videos.
Meri treadmill awaaz kar rahi hai kadam rakhne par
Where the sound is coming from? Motor, Belt or somewhere else? If It is from the board and belt you may spray some lubricant. If it is touching the side because of misalignment, you may align the belt. I am not a mechanic, but I have gained good experience after using treadmills for about 20 years.
@@UmakantMishra ab sahi karliya mene,shock absorber m jo nut bolt the wo tight krdiye
Ok. nice to know that. 🌷 Please watch my other videos and give your comments. 🌷🙏🙏