Back in the day we tested belts and yes most work but don't last as long as the factory belts. Some aftermarket belts we soon developed static problems and early high draw readings. But like I said I worked for many manufacturers and did warranty over my 32 years . I believe in factory deck and belts.
Bro, I appreciate you posting this video. I bought mine from a MWR garage sale during COVID while I was still active duty. The DoD bought a ton of these and I’m the happy second-hand owner of one. And now FMC! (Fully mission capable) Hooah!
10:08. If the deck is ever like this, you must fully clean out the tread of the very fine wood dust. We (Life Fitness techs) tend to do a full speed test to watch the belt run straight. If you don't clear out that fine dust, that dust will go everywhere and fill the room. Just a tip from one tech to another. :D
There is a hole on the tension roller bracket and another one on the frame. Put a pin through the holes and it will keep the tension roller up so that it is easier to install the belt
Whats up man. I just disassembled my 95T and have a cable that got separated and need to know where it goes. Can you help me? Part number on it says “AK65-00117-0000” “Life Fitness Treadmill Coded Polar to MIB Extension”
From one Gym Tech to another i have always found it easier to get just a small amount of tension on the replacement belt and then slippping the deck (platform) into place. great tip on replacing deck clips 👌 it makes life easier! But god damn that deck should have been flipped over 6/9+months ago🤏
Want more tips, tricks and great information on fitness equipment? Check us out at freedomfitnessequipment.com
32 years in the repair business. Always use factory belts. This is not as they don't have the factory Lifefitness name on the belt.
@@bigmike1556 Not true at all, there are far more belts offered that are NOT OEM that work great
Back in the day we tested belts and yes most work but don't last as long as the factory belts. Some aftermarket belts we soon developed static problems and early high draw readings. But like I said I worked for many manufacturers and did warranty over my 32 years . I believe in factory deck and belts.
Bro, I appreciate you posting this video. I bought mine from a MWR garage sale during COVID while I was still active duty. The DoD bought a ton of these and I’m the happy second-hand owner of one. And now FMC! (Fully mission capable) Hooah!
10:08. If the deck is ever like this, you must fully clean out the tread of the very fine wood dust. We (Life Fitness techs) tend to do a full speed test to watch the belt run straight. If you don't clear out that fine dust, that dust will go everywhere and fill the room. Just a tip from one tech to another. :D
Great video ... Thank you for making it and not skipping over the difficult portions .. like so many do...
Glad it was helpful!
There is a hole on the tension roller bracket and another one on the frame. Put a pin through the holes and it will keep the tension roller up so that it is easier to install the belt
What is the part number for this belt (running) I think i measured length 102 IDK need a part number asap
Does it have an anti-static tinsel?
Unrelated question (but I can't find an answer anywhere) - do you have any tips for replacing the monitor AK70-00038-0001 Engage touch panel?
Should just be plug and play?
Whats up man. I just disassembled my 95T and have a cable that got separated and need to know where it goes. Can you help me?
Part number on it says “AK65-00117-0000”
“Life Fitness Treadmill Coded Polar to MIB Extension”
Would recommend the parts manuals on gympart.com
Man at least vacum it before you place that belt. It’s disgusting.
He wiped it down, as should you.
From one Gym Tech to another i have always found it easier to get just a small amount of tension on the replacement belt and then slippping the deck (platform) into place.
great tip on replacing deck clips 👌 it makes life easier!
But god damn that deck should have been flipped over 6/9+months ago🤏