Meyle engine oil is incredible, im using 5-30 for my bmw e46 323ci, this is the results: engine sound is very calm, car runs freely, great acceleration, after releasing gas pedal, rpm of the engine falls very slowly from high to low 750, it has incredibly longer life, even when it turned to black and i changed with new meyle oil, differences between them was not noticeable, this also means that it cleans my old engine. The meyle parts are just terminators, very hard to kill and all these with great price. I love this brand..
One last question: If the transmission oil is very dark and smells burnt, is it advisable to drain the torque converter? Or would it be better to just drain and refill the pan and leave the torque converter alone to keep some of the old oil inside? I'm asking because I've heard that flushing all the fluid out could cause problems if your oil hasn't been changed in a long time.
Hi P Mo, in your case I strongly recommend to drain also the torque converter to get rid of as much old oil as possible. There are several liters of oil in it. Therefore just follow the steps given in the video. :-) Your MEYLE Team
After the initial oil filling of approximately 6 Liters please start the engine and monitor the gearbox oil temperature. At this point the oil temperature should be well under 45 degrees. Now fill the other 2 Liters gearbox oil and shift through the gears. Now disconnect the filling hose and watch some oil drain out until it drips out like in the video. Now the oil temperature should be maximum 45 degrees. If the temperature is higher let oil cool down and repeat the oil level checking process.
This is the only video which showed how to get the fluid out of the torque converter. Will this procedure work on a 2017 AMG C63S? Also doesn't the return line need to be removed in order to flush oil from the transmission oil coolers?
The AMG models have different transmission variants, even within the same vehicle type. Therefore, we recommend you to always determine the correct procedure based on the original manufacturer's specifications and instructions and follow it.
Hi! You can use the following link for more information: www.meyle.com/fileadmin/user_upload/produkte/PST_Einbau_Oelwechselkits_Km_A1q_L_en.pdf Thank you! :-)
The oil is made in Germany. Besides that, we work with an international network of development and production partners. But be sure, they all contain the same high quality MEYLE parts. Engineering, quality control and logistics are based in Hamburg, Germany. Production is carried out at our own plants and by selected international partners.
Hi Stelu, thanks for your comment. The gearbox in general can be identified by the dimples. The MEYLE ATF plus 9 gearbox oil is dyed greenish. Important here is not the dye color but the oil specification. The 7G-tronic plus gearbox must be filled with ATF plus 9. One of the lowest viscosity gearbox oils worldwide!
Hello I have a mercedes Class V 2015 (w447) with 7gtronic and start/stop reference 722908 can you confirm which Meyle kit I should use and oil quantity? How do I check oil temperature is 45C ?Thanks
Hello, for giving you more details about the appropriate MEYLE Kit, we need the detailed vehicle data. It would be the easiest way for you to use our contact form for our Technical Service Team: www.meyle.com/en/contact-2/technical-request/ The colleagues will get back to you as quick as possible.
The procedure is similar for the W212, but not exactly the same. Our recommendation: The work should definitely be carried out by trained personnel. The installation instructions and regulations of the original manufacturer must be followed.
Great video, but one question, when I go to the Meyle site, it shows two different kind of kits for the 2014 MB w212 7 22.9 transmission, and one of them says "only for Vehs with Stop / Start technology." so why is this? What or where is the difference? Mine is the Stop / Start version, Thanks for your help !!! :)
Your car has the 7Gtronic+ gearbox installed. The difference between the oil change kits within the 7Gtronic+ range is the amount of gearbox oil supplied. Your car has an additional electric oil pump below the torque converter. This auxiliary oil pump supplies oil pressure to the gearbox while engine is stationary. The right kit for your car is 014 135 1410. I hope that’s the information you requested.
@@MEYLETV So, the only difference is the quantity of the oil? All other transmission parts are the same? Filter, pan gasket, pan bolts, standpipe, magnets, TC drain plug? ETC, ? And of course the Fluid is MB 236.15, blue colored.?
Yes all parts are the same. Filter, pan gasket, short stand pipe (green), magnets, drain plugs, washers, alloy-bolts. The oil from us is colored light red, not blue but has the exact same specifications for your 7G-tronic+ gearbox. The very important part is the filter. Only with MEYLE you get the three layered filter in the aftermarket which is required for your gearbox and has the exact same specifications as the Mercedes original filter. It has three different filter layers inside ensuring sufficient fluid filtering throughout the 100.000 km oil change interval. If you perform the change interval yourself, be careful with the alloy bolts. 4Nm +180° is the tightening specification for those, a bit too much and the bolts snap off. A small tightening If there is anything else you are interested in, please let us know.
@MEYLETV Thanks for your very prompt and informative reply. One other question, is the MEYLE HX124D trans filter suitable for my 2014 E class W212 722.9 7 speed? Thank you.
In principle, it is not necessary to warm up the engine/transmission before draining the oil. However, we refer to the vehicle manufacturer's specifications for further information.
Very good video, Thanks for sharing, and one question. Regarding the auxiliary pump, in the Meyle transmission kit for the 722.9 transmission ( the one in this video) are the pump seals supplied with the kit? or are they a separate order? If so can you post the part Nrs? Thanks again, Jim.
Hi, i buy kit meyle for c320cdi 7gtronic MB 236.14, but i see my gearbox is 722.903, i think is 7gtronic plus. Is t correct MB 236.14 for 722.903? Thanks
Hello Santi, since this is a very specific question, we kindly ask you to get in touch with our technical service team. They can surely help you with your request in a short time. You can reach them by using our contact form: www.meyle.com/en/contact-2/technical-request/
Hello, unfortunately we cannot say much about this from a distance. Please contact a workshop of your choice, they can surely help you. Best regards, your MEYLE team
Hello Asim, please take a look in your Mercedes manual. It´s not possible for us to give you information about the costs, sorry. Best regards, MEYLE-TV
In most cases, there is a drain plug on 722.9 gearboxes. But there can also be some without. To be 100% sure, this needs to be determined on the actual vehicle.
@@MEYLETV Alright. That's the part that's getting me confused because I've seen a lot of videos where they don't use a drain plug. I guess I won't know until I'm under the car. It's a 2010 ML350 Bluetec by the way. Production date is March 2010.
Hello, unfortunately we don't have this information. Please get in touch with the manufacturer who can help you with this. But our oil change kits contain always the corresponding quantity of oil for your car.
It depends on which transmission you ask for. Select the vehicle and transmission type from our overview - and you have all the important information at a glance. You'll find it here: www.meyle.com/fileadmin/user_upload/produkte/PST_Einbau_Oelwechselkits_Km_A1q_L_en.pdf
I cant trust those mechanic that fob off customers like us an fit cheap parts rather than genuine parts given. Who is this guy I wanna take my car to him
Hello, if you emty the torque converter completely you, have around 8 liters of oil to change. The MEYLE kit part number for your car is 014 135 1212. To be safe, order one liter of gearbox oil 014 019 2800 more, because while filling you will overfill first and then let drain out again the excessive oil.
I have a 2013 ML350 4matic, TC drain is nearly impossible to remove or replace. Any suggestion on removing more fluid than just the pan drain? Several MB message boards suggested the trans pan needs to be level when fill/drain. The ML350 slopes up in the front so you would have to raise the rear to level it. So I am questioning this. I am thinking the vehicle needs to be level as it appears in this video. Any thoughts. Thank you
It is difficult for us to help with technical questions from a distance. In this case please contact your trusted workshop for this. Best regards, MEYLE-TV
La vidéo doit être applicable à votre transmission. Comme toujours, suivez toujours les instructions du fabricant d'origine et travaillez en conséquence.
You are completely right. For the 7G Tronic Plus transmission, blue oil with Mercedes standard 236.15 must be used. This is the regulation for these vehicles. But: we also do that in the video 😉 It is blue oil and you can also recognize it by the bottles labeled "ATF Plus 7".
Meyle engine oil is incredible, im using 5-30 for my bmw e46 323ci, this is the results: engine sound is very calm, car runs freely, great acceleration, after releasing gas pedal, rpm of the engine falls very slowly from high to low 750, it has incredibly longer life, even when it turned to black and i changed with new meyle oil, differences between them was not noticeable, this also means that it cleans my old engine. The meyle parts are just terminators, very hard to kill and all these with great price. I love this brand..
One last question: If the transmission oil is very dark and smells burnt, is it advisable to drain the torque converter? Or would it be better to just drain and refill the pan and leave the torque converter alone to keep some of the old oil inside?
I'm asking because I've heard that flushing all the fluid out could cause problems if your oil hasn't been changed in a long time.
Hi P Mo,
in your case I strongly recommend to drain also the torque converter to get rid of as much old oil as possible. There are several liters of oil in it. Therefore just follow the steps given in the video. :-)
Your MEYLE Team
Hello! One question in an A class a250 7gdct when should I change my atf and filters thanks
In what paticularly time do we need to start the motor to get to 45degrees, and why does it need to get to 45 degrees
After the initial oil filling of approximately 6 Liters please start the engine and monitor the gearbox oil temperature. At this point the oil temperature should be well under 45 degrees. Now fill the other 2 Liters gearbox oil and shift through the gears. Now disconnect the filling hose and watch some oil drain out until it drips out like in the video. Now the oil temperature should be maximum 45 degrees. If the temperature is higher let oil cool down and repeat the oil level checking process.
Très très bien travaillé c’est du travail de prof 👌👌 je vous remercie beaucoup vous êtes le ( Number one )
This is the only video which showed how to get the fluid out of the torque converter. Will this procedure work on a 2017 AMG C63S? Also doesn't the return line need to be removed in order to flush oil from the transmission oil coolers?
The AMG models have different transmission variants, even within the same vehicle type. Therefore, we recommend you to always determine the correct procedure based on the original manufacturer's specifications and instructions and follow it.
Thanks for the video. I would like to know how many liters of oil to put in my 722.1 W4B025 automatic transmission?
Unfortunately we cannot provide an exact specification. We kindly ask you to have a look in the relevant technical literature.
hi.. does the engine have to be running to measure the oil level? should it be turned off when it reaches 45 degrees thanks.
Wow. Difficult to do at home. Thanks
Every how many kilometres need to change oil in this gearbox?
Hi!
You can use the following link for more information:
www.meyle.com/fileadmin/user_upload/produkte/PST_Einbau_Oelwechselkits_Km_A1q_L_en.pdf
Thank you! :-)
Good Job. What is the part number for the Hazet Torque Wrench you were using Please?
Meyle oil is made in germany or china？ Why some forum says from china？ Very confusing！ Thank you .
The oil is made in Germany. Besides that, we work with an international network of development and production partners. But be sure, they all contain the same high quality MEYLE parts. Engineering, quality control and logistics are based in Hamburg, Germany. Production is carried out at our own plants and by selected international partners.
If you have round dimples on oil pan is red oil
If you have oval dimples on oil pan is blue.
You put blue oil , what dimples did you have ?
Hi Stelu,
thanks for your comment. The gearbox in general can be identified by the dimples. The MEYLE ATF plus 9 gearbox oil is dyed greenish. Important here is not the dye color but the oil specification. The 7G-tronic plus gearbox must be filled with ATF plus 9. One of the lowest viscosity gearbox oils worldwide!
Any video for 9 speed 725
Hello I have a mercedes Class V 2015 (w447) with 7gtronic and start/stop reference 722908 can you confirm which Meyle kit I should use and oil quantity? How do I check oil temperature is 45C ?Thanks
Hello, for giving you more details about the appropriate MEYLE Kit, we need the detailed vehicle data. It would be the easiest way for you to use our contact form for our Technical Service Team: www.meyle.com/en/contact-2/technical-request/
The colleagues will get back to you as quick as possible.
Hi is this procedure the same for 2015 e220 diesel w212
The procedure is similar for the W212, but not exactly the same. Our recommendation: The work should definitely be carried out by trained personnel. The installation instructions and regulations of the original manufacturer must be followed.
Great video, but one question, when I go to the Meyle site, it shows two different kind of kits for the 2014 MB w212 7 22.9 transmission, and one of them says "only for Vehs with Stop / Start technology." so why is this? What or where is the difference? Mine is the Stop / Start version, Thanks for your help !!! :)
Your car has the 7Gtronic+ gearbox installed. The difference between the oil change kits within the 7Gtronic+ range is the amount of gearbox oil supplied. Your car has an additional electric oil pump below the torque converter. This auxiliary oil pump supplies oil pressure to the gearbox while engine is stationary. The right kit for your car is 014 135 1410. I hope that’s the information you requested.
@@MEYLETV So, the only difference is the quantity of the oil? All other transmission parts are the same? Filter, pan gasket, pan bolts, standpipe, magnets, TC drain plug? ETC, ? And of course the Fluid is MB 236.15, blue colored.?
Yes all parts are the same. Filter, pan gasket, short stand pipe (green), magnets, drain plugs, washers, alloy-bolts. The oil from us is colored light red, not blue but has the exact same specifications for your 7G-tronic+ gearbox. The very important part is the filter. Only with MEYLE you get the three layered filter in the aftermarket which is required for your gearbox and has the exact same specifications as the Mercedes original filter. It has three different filter layers inside ensuring sufficient fluid filtering throughout the 100.000 km oil change interval.
If you perform the change interval yourself, be careful with the alloy bolts. 4Nm +180° is the tightening specification for those, a bit too much and the bolts snap off. A small tightening If there is anything else you are interested in, please let us know.
@MEYLETV Thanks for your very prompt and informative reply. One other question, is the MEYLE HX124D trans filter suitable for my 2014 E class W212 722.9 7 speed? Thank you.
The filter you have to order is MEYLE no: 014 137 1107.
When draining the transmission oil, do I need to warm up the car to a certain degree (warm engine)? please enlighten :)
In principle, it is not necessary to warm up the engine/transmission before draining the oil. However, we refer to the vehicle manufacturer's specifications for further information.
Is it the same procedure for the bluetec hybrid C300h version? Can't find any info if the box is the same
Which cleaner do you use to clean the pan?
We use regular brake cleaner.
Very good video, Thanks for sharing, and one question. Regarding the auxiliary pump, in the Meyle transmission kit for the 722.9 transmission ( the one in this video) are the pump seals supplied with the kit? or are they a separate order? If so can you post the part Nrs? Thanks again, Jim.
Hello, we do not supply the rubber tubes, because they are reusable. If yours are damaged you can order A 221 270 76 04 for replacement.
@@MEYLETV you have been most helpful, thank you.Jim
Hi, i buy kit meyle for c320cdi 7gtronic MB 236.14, but i see my gearbox is 722.903, i think is 7gtronic plus.
Is t correct MB 236.14 for 722.903?
Thanks
Hello Santi, since this is a very specific question, we kindly ask you to get in touch with our technical service team. They can surely help you with your request in a short time. You can reach them by using our contact form: www.meyle.com/en/contact-2/technical-request/
I have 184k on my 2010 w204 and the at fluid has never been changed. Is it too late to change it?
Hello, unfortunately we cannot say much about this from a distance. Please contact a workshop of your choice, they can surely help you. Best regards, your MEYLE team
Hi, Please tell us Mercedes E220d (2017 or onwards models ) , when transmission Oil & Filter need to replace? And how much estimated Cost ?
Hello Asim, please take a look in your Mercedes manual. It´s not possible for us to give you information about the costs, sorry. Best regards, MEYLE-TV
Is Meyle ATF Plus 9 sold in the USA anywhere?
Hi Charles, thank you for the question! In the moment we unfortunately aren´t selling it in the USA. Best regards, your MEYLE Team
Where can I get this done reliable service?
I have a 2011Mercedes Benz E350 and i live nyc
Awesome video! One question: Does the 722.9 have a torque converter drain plug as well, or is that only for cars with the 722.9 Plus transmission?
In most cases, there is a drain plug on 722.9 gearboxes. But there can also be some without. To be 100% sure, this needs to be determined on the actual vehicle.
@@MEYLETV Alright. That's the part that's getting me confused because I've seen a lot of videos where they don't use a drain plug. I guess I won't know until I'm under the car. It's a 2010 ML350 Bluetec by the way. Production date is March 2010.
@@pmo3448
Also, those who didn't drain the torque converter used about 4 liters when refilling the system and this guy used more than 6 liters
Good job sharing
How many litres of gear oil goes in c250d 2017 (w205)
Hello, unfortunately we don't have this information. Please get in touch with the manufacturer who can help you with this. But our oil change kits contain always the corresponding quantity of oil for your car.
Where can i get 8 Lt Pump?
Km or year for transmisión service? Pls
It depends on which transmission you ask for. Select the vehicle and transmission type from our overview - and you have all the important information at a glance. You'll find it here: www.meyle.com/fileadmin/user_upload/produkte/PST_Einbau_Oelwechselkits_Km_A1q_L_en.pdf
I cant trust those mechanic that fob off customers like us an fit cheap parts rather than genuine parts given. Who is this guy I wanna take my car to him
Subscribed! Great Vid...
Please wear eye protection.😎
Great 👍
We will keep that in mind next time.
Good lesson! Super!
Hello for mercedes 320 cdi 2007 165kw 224 ps 7 G automatic transmision 722.9 Transmission Fluid Capacity oil ?
Hello, if you emty the torque converter completely you, have around 8 liters of oil to change. The MEYLE kit part number for your car is 014 135 1212.
To be safe, order one liter of gearbox oil 014 019 2800 more, because while filling you will overfill first and then let drain out again the excessive oil.
I have a 2013 ML350 4matic, TC drain is nearly impossible to remove or replace. Any suggestion on removing more fluid than just the pan drain?
Several MB message boards suggested the trans pan needs to be level when fill/drain. The ML350 slopes up in the front so you would have to raise the rear to level it. So I am questioning this. I am thinking the vehicle needs to be level as it appears in this video. Any thoughts. Thank you
why just why the oil needs to be filled this way.
Because only this way you can fill the oil to the correct level.
Hi, did you pump in total of 6litres in this video?
Hello, as mentioned in the video it's 8 liters.
MEYLETV i tried to empty the oil under the oilpump, but couldt find the screw, after turning it for 20minute
It is difficult for us to help with technical questions from a distance. In this case please contact your trusted workshop for this. Best regards, MEYLE-TV
Which car is it?
It's a Mercedes C-Class (W205) 220 CDI
Good job 👍🏾
Super erklär Video
Danke
Brilliant
İncredible.
Bonjour e350 cdi 08/2010 transmission numéro 722 902 02 860 801 est-ce que la même chose ?merci
La vidéo doit être applicable à votre transmission.
Comme toujours, suivez toujours les instructions du fabricant d'origine et travaillez en conséquence.
Amateurs! Wrong Oil ! Is a 7gPlus. You need the 236.15 blue Oil. Green Pipe and/or extra Oil Pump is only a 7g+ Transmission.
You are completely right. For the 7G Tronic Plus transmission, blue oil with Mercedes standard 236.15 must be used. This is the regulation for these vehicles. But: we also do that in the video 😉
It is blue oil and you can also recognize it by the bottles labeled "ATF Plus 7".
Must wear a safety glass!