8 Awesome 3D Prints That Will Blow Your Mind! 3D Printed on the Elegoo Neptune 4 MAX 3D Printer
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2024
- Here are 8 Cool 3D Printing models that you can print today! Check out todays video sponsor @ElegooOfficial Check out their affordable 3D Printers Here: bit.ly/3wej5rl
All these models can be found over on the @stlflix Website here: www.stlflix.com/
#3dprinting #3dprinter #3dprinted - บันเทิง
![[TH]FFWS SEA Spring 2024 Point Rush - Day 1](http://i.ytimg.com/vi/_LI5pXZFYhw/mqdefault.jpg)
Aaahh, nothing like some 3D print and chill after a hard day!
Thanks for watching 🙏🏼
@@WildRoseBuilds You keep making these quality videos, i'll keep watching . Deal?
Nice video.
Would appreciate the list of 3d model names of the stl's from stlflix.
Thanks
I have to say that out of all of the 3D model printing channels you all have the best models, best music, and best time lapses. I wish I could put a bunch of your videos together and just have them in one long 2 hour block that I could put on when I am puttering around the house as they are awesome and soothing at the same time.
One question for you on the incense burners as you have done a few - I printed one not too long ago that has a tiered shelving effect and it's awesome with the smoke flowing down with fluid (I'm excited to try some of your others). I put the metal washer in like you did on your various prints, and it sort of melted into the top of the print. That and there was an extra smell like the plastic was almost burning (it wasn't), but considering the metal disc was melting into the print something clearly was happening that was sub-par. I wanted to see if you ran into either of those scenarios and if you did what you did to potentially address them.
Please keep up the excellent work.
Thanks for the kind words!! I usually pull the incense cones off before they fully burn down. I think the down draft cones tend to leave a little residue that has a weird smell. Maybe some left over oils or something. Petg would probably hold up better but I haven’t had any of these melt yet 😉
The filament you used for the dragon is gorgeous
Yes!!! 3D Jake matte orange eco pla
Well tuned printer. I come back to this channel from time to time. Relaxing experience - watching your timelapses sir.
Thanks for watching! I appreciate it
A really interesting collection of prints. Love the laminar flow incense. Cool stuff.
Just wondering will the incense holders work with sticks or does it have to be cones?
Can you do a video on what software you use and the settings becuase those prints look incredible!
Whats your retraction settings ?
How awesome 😍😍
For the dragon skull that you put the light bulb into would it work better with leds for weight and a cleaner wall hang look?
Very true I was about to comment on that as well.
Either have leds as you said or juse enough coverint paint to mask the lamps glow trough the skull.
But I think mixing the paint and the leds would give the best results
Fellow Albertan? This is really impressive, thanks for sharing!
How do I get my supports to come off like that?!?!?
What type of fillament you used for the horns of the dragon? That looked amazing.
That was clear amz3d pla. Turned out really cool!
Ummm where can i find those stl files and what was that glue uou used
What infill type do you use for the prints? Im still quite new to FDM pronting and just use gyroid.
I use supportive cubic. Lets you use less density while still being able to print internal overhangs!
@@WildRoseBuildsamazing thank you! It looks like it will save a lot of time and filament!
Still the time lapse king, has the extruder been sorted after the initial leaks and problems?
Nicely done, that is dope. What are the smoke things that you use?
Backflow incense burner cones
You could make a video with gift ideas for Mother's Day.
The incense model is nice BUT how is it that the material doesn't melt from the heat of the incense?
Cause I've tried to make my own looking like a Dino Graveyard using this Technique with the washer. But the material melted from the heat of the incense and the washer. Like a hot knife
What are those scented smoking little bullets called?
Disappointed Joel. No dice tower? Not good. My favourite was definitely the dragon lamp ✌️
More dice towers to come do t you worry haha! Thanks for watching
Please stl dragon cup!!! Please 🙏
Will you one day make designs for consoles or PC towers?
I hope so!
tell me what kind of candles these are?
These are down draft incense cones!
whats your support settings ?
.15mm contact ✨
That last one we can see doesn’t work that well, will definitely need improvements.
Cutting holes with a soldering iron is the strangest thing here. Could just edit it intead of breathing fumes and covering the iron in plastic soot
I love how those prints look finished, the only thing I'm looking a bit concerned is that I'm more into practical parts, I love to see someone rebuild an angle grinder part, a cover/carter from a scooter that is missing, pannels and door handles for cars and stuff like that, practical building, or even more industrial use like vaccuum tunnels for parts, gears for line feeders, all stuff that I mostly consider. More the use of chlorine and fluorine addition into materials for chemistry put into filters screws that don't crack under heat and corosive ambients, or self lubricant parts like sliders, wheels, gears, and so on.
You can definitely print some of those items ideally in a stronger material. I designed and printed a pool skimmer flap in petg and it’s being used in a chlorine pool for the past 3-4 years. It’s still holding strong. The material used will depend on environment and use case. I mainly follow designers that do functional parts in 3d printing.
The only thing mind blowing was the editing to remove the print head.
A flagon with a dragon...
that dragon 8:38 was really disappointing, you could have sliced the holes easily in slicer app before and printed with the holes
Totally! I didn’t have the idea to put lights in it until it was already printed. I will revisit that one for sure. No infill, more walls to block light, and a proper bulb mount. Thanks for watching!
Ouch, what did you do to your thumb?
Tried to grab a stick out of my dogs mouth 🥲
Everyone is wondering what kind if filament, software, and settings this person is using. I'm just wondering how they made a time laps without showing the filament extruder.
There's a trick to it, after each layer finishes the print head goes back to the home position, then the picture is taken, then the print moves on to the next layer
Bonjour 🇨🇵
👏👏👏👏👍🏆🥂🎆🙏
Your finger
Dog bit it during fetch 😅
No more free model links?! Unsubscribed
Poor.
@@Mr.Rad1calsad
@@Mr.Rad1cal🤣
Didn't ask
Really? Subscription? 👎
You don’t have to be a dick.
@3dprintingnerd