Comparing 0.4mm and 0.6mm Nozzles for the Flashforge Adventurer 5M

I recently purchased a 0.6mm nozzle for the Flashforge Adventurer 5M/5M Pro from AliExpress. In this video, I'm going to see how much faster I can print using this nozzle and the quality differences between it and the standard 0.4mm nozzle.
Buy Nozzles at AliExpress: s.click.aliexpress.com/e/_DBR...
Flashforge Adventurer 5M Playlist: • Flashforge Adventurer 5M
Flashforge Accessory Toolbox File (Scroll down the page to find it): wiki.flashforge.com/en/knowle...
*****************************************************************************************************
Chapters
0:00 Where I Bought The Nozzle
1:19 Close Up Comparison
1:50 Purpose of a 0.6 Nozzle
2:51 OrcaSlicer Settings
7:35 Print Comparison #1
9:16 Print Comparison # 2
11:48 Mystery Print
14:14 Conclusion
*****************************************************************************************************
Coupons and Deals:
JLCPCB 3D Printing Starts at $0.30 & $54 Coupons for New Users Here: 3d.jlcpcb.com/?from=FigureFee...
Card Mafia: Use the Promo Code "FigureFeedback5Off" for 5% Off Your Card Mafia Purchase! : www.cardmafia.com?sca_ref=2492569.wSUwkQ9aSr
******************************************************************************************************
Socials:
Check out my other channel: / @jeremyhill
For business inquiries, email me at [e-mail]
Follow on Threads: www.threads.net/@jeremythill
Follow on Instagram: / figurefeedback
******************************************************************************
My 3D Printing Equipment (Affiliate Links)
Anycubic Photon Mono 4K: amzn.to/3odVEKT
Anycubic Wash and Cure 2.0: amzn.to/3pH41ii
Anycubic 3D Printing Grey Resin: amzn.to/3Wdv8xK
OnePeng Grey Model Resin: amzn.to/453cIDF
Anycubic Eco UV Grey Resin: amzn.to/45cB4ei
Siraya Tech Easy Grey Resin: amzn.to/3MyZCam
Mealos Silicon Mat: amzn.to/3pRJoAg
Gorilla Super Glue Gel: amzn.to/42c4TcA
Vallejo Model Air Set: amzn.to/3oTfGdP
Timbertech Airbrush Kit: amzn.to/3CbuuI0
Creality Ender 3 Pro: amzn.to/45dvGIe
Creality Rainbow PLA Filament: amzn.to/3WfYLP9
Inland Silver PLA Plus Filament: amzn.to/3BxpHQO
Inland Grey PLA Plus Filament 2-Pack: amzn.to/432tmSg

[@supersayain4408]

I know this won't be seen, but I have to thank you immensely. I just got started in Printing and have found only your videos to truly be helpful. I can not express the gratitude I have for your kindess.

[@FigureFeedback]

I see you! I'm glad I was able to help you out!

[@aarondancer]

Really appreciate these Adventurer 5M videos. They’ve been really helpful when researching and using the printer. I’m using it for prototyping and building garage organizing accessories. The 0.6mm nozzle really helps save time.

[@TinkeringOP]

Your videos are legit. I bought the printer. What a positive difference from operating an Ender 3.

[@vaughanza]

Really not bad with 0.60 nozzles, thanks for great video.

[@XDeminox]

I would love to see a comparison between the .4 and the .25 nozzle. I prefer quality over speed

[@markdebsauzzietravels]

Hi Jeremey I just got my Adventure 5 3D printer ( after your recommendations) and have printed 3 prints so far 2 from the examples and one I designed in tinkercad and all have come out great, mined you I have never played with a printer before but have watched a lot of videos thank you for putting in the time to help people like me out
Cheers Mark
P.S I picked it up here in AUZ for $499 shipped :)

[@-__-4186]

Its really worth to mention that CNC Kitchen measured impact of layer height to nozzle diameter ratio on strength of prints and if layer is >1/2 nozzle size print looses on strength that's why default for 0.4 is 0.2 and for 0.6 is 0.3.

[@LordReef]

yo he comprado el nozzle 0.6 hoy. Mañana me llega, estoy comentando esto mientras se reproduce tu introducción. Voy a verlo atentamente

[@huseyinavnisarkaya]

Great video i look forward to print some models with .6. I would also love to see some comparison between .4 and .28

[@Noxmyn]

8:40 You can enable 2 parameters: reduce the layer height and reduce the width of the outer wall

[@WicksterZer0]

Since you were having trouble printing with TPU on your last vid, do you think printing TPU with a 0.6 nozzle would fair better? Less jamming?

[@ados_guy]

Will Flashforge release an AMS sty[e color system?

[@devinc7425]

Have you tried nylon with this printer?

[@StasonKalbason]

Молодцом!

[@user-gt1tk5gj8h]

Would you say that it’s a fast and good printer?

[@FigureFeedback]

Absolutely, and a great price if you get it for $299.

[@darkwinter7395]

Ignoring the lack of soluble support material use, it's... OK I guess, if you're into cartoon turtles.
OK, OK... yeah, my Halo fanboyizim is showing.😉