วีดีโอ

Loved this time-lapse video, it helped me sleep a lot!

Can I get MakerWorld files on this? Every time someone posts a link for a file, it’s for a Bambu

How long did it take to print the helmet? It looks way faster than my printer.

Such a super helpful video!! Keep them coming. Appreciate you!

Does it only upload if you’re on the same WiFi ? Or can you do everything remotely

It seems to be very efficient, in the future video, can you add some introduction to the types of consumables you use and printing parameters? This has been very helpful for me

I was attemping this because anytime i use the orca flash forge, it at first wasnt connecting to my printer. Then wouldnt let me log in at all. I try to select lan only and it comes up and says " please connect to the network" Im getting so frustrated..

I wish i could get amazing results like that with my printer haha. The one I bought struggles to get good prints like that lol.

My printer is on the way to be delivered. I'll be trying both of these software packages, but in Linux, so I'll be installing from a package manager. It will be interesting to see the differences, mostly in the update process for which versions I will be getting, given the distro I am using.

I appreciate your knowledge and the straight-forward approach. So tired of 25 min videos with 5 min content.

I spy with my little eye a Delta printer

This is amazing! What's the layer height you used for the 0.2 miniatures and Wonder Woman? Was it 0.1mm or less?

thanks, I will have to check the dryer vids

I enjoy your vids, Jeremy! now - where did you get that sweater? I've been on the hunt for replacements for mine that are just like that but not available any more!

I bought a filament dryer

How did you get that different colors?

How did you get that different colors?

Your videos are outstanding. Thank you so much!

Elegoo Rapid PETG Red is crapy on my Flashforge 5M @ 230c / 65c. Not constant during prints. Elegoo PETG standard Red is great.

I print in resin and I love it, but I'm looking to buy an FDM printer for bases and terrain so that I don't waste my resin with it and these bambu lab ones look amazing. That wonder woman, mannnn it really looked like resin, amazing.

Great comparison presentation; very well spoken.

Thank you! This has helped alot!

Thanks man! this is just what I needed :)

What should the room's atmosphere be for the printer?

Thanks

all i want is a 300mm or slightly bigger bambu p1s

i love my .6mm nozzle. thanks bro! subd. nice shirt too!

Very informative. Thanks

Nice stream! BTW, enabling Z-lift can really help prevent your supports from getting knocked off during printing

The light stringing between the letters can be removed easily with a small torch quickly passing over the surface

I feel less overwhelmed and better equipped to make an informed decision in my filament selections now! Thank you!!

This video has been so helpful, I cannot even put into words how much I appreciate you! Thanks for taking the time to fill in noobs like me!

What does it mean when it says target machine actively refused it?

enjoyed your video! it's very clear and informative! 👍👍

For me it says extruded doesn’t heat up

Hi Jeremy, greetings from Argentina... wante to get your feed on this... I have a heavy modded ender 3 v2 (klipper, linear rails, new board, dual z, bl touch, spider pro hotend, dual 5015 cooling, direct drive with bmg extruder, etc) and want to get the most quality out of the 0.4 nozzle... you di have any orca slicer guide to get the most quality, no matter the speed for high detail models? maybe bigger than minis... 10cm tall models ..

Please post this file somewhere for us to download. It’s not available at Makeronline either anymore.

I think that once you prime and paint a 0.2 FDM model, it would be perfect. FDM can improve by offering even smaller nozzles. On the other hand, resin printing won't eliminate the layer problem altogether, even with 16k screens. Additionally, the cleaning and curing process will always be resin's Achilles' heel.

Can you try the .25 nozzle.

Thank you. I just got my machine you’ve been a big help. I love customizing 1/6 scale figures so skies the limit as soon as I learn how to use it. lol 😂😢😂

What profile are you using for asa on the ad5m? I have had to select the ad5mpro abs profile and it caused major warping on the asa.

I've tried this. It does not work. No extrusion happens and the piece of old filament is still in the feeder. how do I fix now?

Thanks for this. I have been trying to figure out how to do just this and I didn't even think about an RC that would have the capabilities to do this. Seems like a no brainer on that PR. HAHA! Question tho, how can I view the camera feed from Orca like you can in FlashPrint? Or is that not possible?

top of the line video for those of us just starting out. thank you

Thank you so much. This printer has had me so frustrated from the start. This really helped

A z aliexpres? Można kupować?