Citizen Watch Setting Instruction - C650, C651, C652

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ส.ค. 2024
  • Setting instructions for the Citizen C650, C651, and C652.
    Setting the Time 00:00
    Setting the Calendar 03:03
    Setting the Alarm(s) 04:46
    Using the Chronograph 06:30
    Using the Countdown timer 07:17
    Setting Time Zones 08:01
    Adding and Removing Cities 09:14
    All Reset and Zero Positioning 11:37
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 55

  • @robertleewhitt6241
    @robertleewhitt6241 10 วันที่ผ่านมา

    Very good tutorial A++ extremely professional commentator ! Thank you 🙏

  • @sjayasuriya
    @sjayasuriya ปีที่แล้ว +2

    I bought this watch almost 25 years ago. Recently changed the capacitor. Works 100%

    • @Danish-Siddiqui
      @Danish-Siddiqui ปีที่แล้ว

      Price of this Watch?

    • @PatronSaintofKnives
      @PatronSaintofKnives ปีที่แล้ว

      My digital on the left flashes UTC. Nothing changes. The only dials that moves is the bottom center. No buttons work. Do I need to fix something inside the watch?

    • @tvsurfer808
      @tvsurfer808 8 หลายเดือนก่อน

      How did you change the battery, did you send it to Citizen in California? Please share. I have same watch like new, purchased new in 2001. The outside is like new and I would like to have it running again, a definite keepsake. Aloha.

    • @azdisney3528
      @azdisney3528 2 หลายเดือนก่อน

      @@tvsurfer808 check out this video. You will need to change the battery/capacitor

  • @mikesweeney5928
    @mikesweeney5928 2 ปีที่แล้ว +4

    Thanks for the tutorial. I was gifted an old Blue Angels Skyhawk Eco Drive. I was getting frustrated. Never thought about setting the digital side first.

  • @debc7341
    @debc7341 2 ปีที่แล้ว

    Couldn’t get my son’s 22 yr old Skyhawk to set for the life of me. I have always cleaned the front movable dial with dental floss and WD40. The A and B buttons weren’t displaying properly so I squirted just a minute amount around the buttons, and voila! It worked. I followed this video and the watch is now displaying the right time digital, analog, and calendar!

  • @nelsoncolon5179
    @nelsoncolon5179 9 ปีที่แล้ว +1

    Just got mine for Valentines Day from wife. Big happy. Great look and very happy.

  • @dwhjr69
    @dwhjr69 2 ปีที่แล้ว +3

    This worked wonderfully for titanium skyhawk not bad for a 20yr old watch

  • @MySmallone1
    @MySmallone1 9 ปีที่แล้ว +2

    it works as he said in the video. i worked for citizen for 16 years.i have set quite a few of these.they were not my specialty, my job was divers watches.

  • @scottmacleod8893
    @scottmacleod8893 4 ปีที่แล้ว +2

    Finally I get the hands to match the digital! Thanks very much 👍🏻

  • @azad76263
    @azad76263 5 ปีที่แล้ว +1

    Thanks very useful great

  • @thomasmelnick9140
    @thomasmelnick9140 2 ปีที่แล้ว

    Just thank you.

  • @lenberard6724
    @lenberard6724 9 ปีที่แล้ว

    yes the hands never did line up.....but it did fix my problems.

  • @jcmontecarlo6123
    @jcmontecarlo6123 3 ปีที่แล้ว

    So cool ,so helpful ! By the way I got one for sale. Just saying ....

  • @rogerlau2516
    @rogerlau2516 10 ปีที่แล้ว +1

    Finally...thanks

  • @qualitylife5350
    @qualitylife5350 3 ปีที่แล้ว

    Citizen eco drive sky hawk wr 200? :-
    1) Which colour is the watch light?
    2) What is the reason for night light showing red colour?
    3) Does it automatically change 1 hour forward or backward automatically without manually setting?

    • @738polarbear
      @738polarbear ปีที่แล้ว

      If it has a light it's red . Not all of the Syhawks have a light . It's red to not interfere with night vision .If you set SMT to ON it changes automatically.

  • @DougFLA123
    @DougFLA123 9 ปีที่แล้ว

    I have a Citizen Eco-Drive Skyhawk watch that I've owned for about twelve years now. The hour hand has never been in sync with the 24 hour hand. They have always been an hour and a half apart. Zeroing doesn't help, because they are corrected in conjunction with each other. Is there anything that can be done about this? Thank you.

    • @karlwagner2223
      @karlwagner2223 9 ปีที่แล้ว +1

      You have to spin the hour hand continuously, many times, until the 24 hour hand matches it at the zero point.

    • @DougFLA123
      @DougFLA123 9 ปีที่แล้ว +1

      Actually, that's not true. The hour hand and the 24 hour hand move in conjunction with each other, so no matter how many times you spin the hour hand, the 24 hour hand never matches it at zero.

    • @maxxawesome7412
      @maxxawesome7412 2 ปีที่แล้ว

      I have the same issue. 24 hour hands are 2hours off, no amount of spinning fixes it as they are linked. Ever fix the issue?

    • @DougFLA123
      @DougFLA123 2 ปีที่แล้ว +1

      @@maxxawesome7412 No, I was never able to fix it, and I really did a lot of research. Like you said…they are linked. I think it would have to be taken apart, the 24 hour hand pulled off the face and then put back on, in the correct position.

    • @maxxawesome7412
      @maxxawesome7412 2 ปีที่แล้ว

      @@DougFLA123 that’s what I’m thinking too. Got it set and working again otherwise, so I guess that’ll do

  • @Barnaby_bo
    @Barnaby_bo 2 ปีที่แล้ว

    Does it have a light for the digital display

  • @Chris09978
    @Chris09978 4 ปีที่แล้ว +1

    The video was very well descriptive but i keep having an issue with this watch that was given to me by my grandfather which is not having the hour and second hand not matching up with the digital and very time I try to set it it adds an extra hour or two and when the hour hand is at the correct hour the minute hand goes crazy non stop until it hits a certain number that doesn’t match up pls I need help cause I want to wear this watch

    • @fahadsunna5019
      @fahadsunna5019 3 ปีที่แล้ว +1

      sorry for being late,
      you have to calibrate the hands first by going to chr mode and the crown to click number 2 then wait for the watch to do its work by moving its dials and after that press a to move seconds hours or minutes dial then try to line hour minutes and seconds to the 12 o clock position once done return crown to position 0 and wait for the watch to do its dial movement then sync digital with analogue by pressing a and b at the same time

    • @Chris09978
      @Chris09978 3 ปีที่แล้ว +1

      @@fahadsunna5019 I see thanks

    • @fahadsunna5019
      @fahadsunna5019 3 ปีที่แล้ว

      @@Chris09978 anytime :)

    • @Drhilmi
      @Drhilmi 2 ปีที่แล้ว

      @@fahadsunna5019 please sir i have c650 it turns off at night but when light comes it switches on to the right time how do i know it needs battery t b replaced or not is there indicator bars ?

  • @lukepalamidis614
    @lukepalamidis614 8 ปีที่แล้ว +2

    I've followed your video, and the watch still does not match with the digital clock. The hour hand is right, but the minute hand is off. Do u recommend anything further to do. I've had this problem for a few years now?

    • @Triple88a
      @Triple88a 8 ปีที่แล้ว +1

      reset it and make sure you do it properly.

  • @CoFRTheGamerXxX
    @CoFRTheGamerXxX 9 ปีที่แล้ว

    Is it me or does the video skip at 11:30ish when setting time?

  • @904SupremeDream
    @904SupremeDream 2 ปีที่แล้ว

    Does anyone know how to set the UTC dial?

    • @johnpeelslovechild
      @johnpeelslovechild ปีที่แล้ว

      Use crown to change mode to CHR position. Pull crown out 2 clicks. Use A button to select MIN in display, keep turning crown and after a long time, you will notice that the UTC display is moving. Set UTC so both hands are at the 12 position. Push crown back in.

  • @markellingham9570
    @markellingham9570 5 ปีที่แล้ว

    I also have been successful in setting the digital portion of the watch, but can not get the watch to match this. I am not sure which city is closest to me - frustrated that I can not find anything to tell me what the abbreviations mean! Also, I can not get my second hand to set - I have been 9 mins fast for years now! I do not want to bring my watch to a jeweler every time the time changes. Honestly do not understand why we have to change to D.L.S.T! Surely someone (corporations) make more money this way!

    • @4everbugui
      @4everbugui 4 ปีที่แล้ว

      Try adding your city and match it.

  • @jameslester6785
    @jameslester6785 5 ปีที่แล้ว +4

    This watch is a Pain in the a##. What the video doesn't tell is you have to calibrate the hands first by setting all hands to the 12:00 position. You do this by turning the crown while in the cal mode. Then fix your digital time and date in the time mode.

    • @MyFddg
      @MyFddg 3 ปีที่แล้ว

      Price

  • @martinsevegny7182
    @martinsevegny7182 2 ปีที่แล้ว

    Thw video is available in french?

  • @justice4all997
    @justice4all997 2 ปีที่แล้ว

    How do I add ghana? Will the ghana time show in the digital display? On video its showing a - sign not the actual time.

    • @kaykay3474
      @kaykay3474 9 หลายเดือนก่อน

      Set it using the UTC otherwise watch the video again from 9:15 secs frame

    • @kaykay3474
      @kaykay3474 9 หลายเดือนก่อน

      And add ACC representing Accra

  • @scvd5010
    @scvd5010 2 ปีที่แล้ว

    Mine is just flashing UTC with 12:00???

  • @1mhmod
    @1mhmod 7 ปีที่แล้ว

    i can't control the clockwise when i click at A+B in my city

    • @1mhmod
      @1mhmod 7 ปีที่แล้ว

      it add 1hr more

  • @MrJohnbety
    @MrJohnbety ปีที่แล้ว

    I am sorry but I feel the same

  • @alwaisman8501
    @alwaisman8501 5 ปีที่แล้ว +8

    Setting this watch is the reason I said screw it and bought an Apple Watch.

    • @jcmontecarlo6123
      @jcmontecarlo6123 3 ปีที่แล้ว

      Oh noooo

    • @tvsurfer808
      @tvsurfer808 8 หลายเดือนก่อน

      Patience and learning are rewarding.

  • @MyFddg
    @MyFddg 3 ปีที่แล้ว

    But the way I got for one sale. Just saying.....

  • @swright681
    @swright681 3 ปีที่แล้ว

    doesnt.work

  • @qualitylife5350
    @qualitylife5350 3 ปีที่แล้ว

    Fc