Thank-you very much for this tip, I've been working on my Haas since the last 4 years and this is the first time that I've opened settings and modify something and the result is very impressive by doing this I'm gonna save a lot of time :) I had encountered some problem by using G99 and luckily I was safe from a horrible crash I will write this experience on G99 tip video .
Running a VF-6SS I have not noticed any real time savings above 3x retracts, as the spindle and Z axis servo don't have the acceleration necessary to really ramp out like, say a Brother does. I have left ours at 3x retract and been just fine. I can see how a smaller machine with a lighter head can utilize this better, though. Also our HFO training instructor has stated that it's possible to break taps by setting the retract higher than the spindle can function (IE a 9x retract when the tap is set to 1500 RPM).
I mostly program on old heidehnain controllers that barely have any special features, those haas videos gave me the idea to create those special settings in sub programs used as custom canned cycles, shame that the old vf3 that sit in the corner of my workplace doesn't run that much
Nice tip. To increase machining speed Thank youi have one suggestion for you. Sir You can Add this J setting in Your VPS Programming so user can set the retract values right from the VPS Page when they creating the Taping Cycles. Thank you 😊
Buen día, tengo una pregunta habrá algún setting, cuando barreno se puede disminuir la velocidad del rapido de la máquina, esto es con brocas muy largas?
Oscar - We can turn on Setting 10 LIMIT RAPID AT 50%. This will slow down all rapid moves. To slow down Rapids on just one drilling operation, we would have to program all of the moves with a G01, so we could control the feedrates with an F-Code. We always have the Feed and Spindle Override buttons, but I know that isn’t what you were asking about. I hope this helps. - Mark, Haas Tip-of-the-day
Ariel - Nope, the J value is optional. The machine will use the value in Setting 130, unless you use a J value on the tapping line, then it will use your J (temporarily) instead. Thanks for the comment. - Mark, Haas Tip-of-the-day
my suggestion for turning on 133 wasn't a troll comment and meant sincerely. Because if for some reason you have to create a peck tapping operation you would need this on. If you decided you needed to tap your holes deeper you can run the same code and not screw up the threads. I would just leave it on all the time, it can't hurt.
+MrMetalShaper The sad part is Haas decided not to make a simple peck tapping macro by adding a Q and/or P value, and instead require long drawn-out code additions.
+PetSize gaming Agreed, setting 198 is great! We have a map of available Setting 198 background colors on the Haas DIY site: diy.haascnc.com/reference-docs/background-color-reference-table. Now you can match your screen to your favorite team's colors! Enjoy.
Antonio - We made a video on G68 Rotation. You can watch it at: th-cam.com/video/5j8GJGqLztU/w-d-xo.html Thanks for the comment. - Mark, Haas Tip-of-the-day
gota love this guy...''how not 2 get screwed out of time''...ha....ha...yup..love there machines....I need more tips like this 1...will shave years off of u'r life....
Nice tip..) I'd tap that !).... way XD but then I read the comments.. how about an update for 2023?) and how about some recommendations for different materials? Don't worry, I'm hooked and will not unsubscribe.. Long live american machinery! P.S. Could use a new Haas T-shirt..)
Haas support is absolutely the finest in the industry.
Thank-you very much for this tip, I've been working on my Haas since the last 4 years and this is the first time that I've opened settings and modify something and the result is very impressive by doing this I'm gonna save a lot of time :) I had encountered some problem by using G99 and luckily I was safe from a horrible crash I will write this experience on G99 tip video .
Running a VF-6SS I have not noticed any real time savings above 3x retracts, as the spindle and Z axis servo don't have the acceleration necessary to really ramp out like, say a Brother does. I have left ours at 3x retract and been just fine. I can see how a smaller machine with a lighter head can utilize this better, though. Also our HFO training instructor has stated that it's possible to break taps by setting the retract higher than the spindle can function (IE a 9x retract when the tap is set to 1500 RPM).
Nice video, thanks!
Very cool idea "tip of the day" keep em coming..👍👍
You are the man.
Fantastic!
I mostly program on old heidehnain controllers that barely have any special features, those haas videos gave me the idea to create those special settings in sub programs used as custom canned cycles, shame that the old vf3 that sit in the corner of my workplace doesn't run that much
Nice tip. To increase machining speed Thank youi have one suggestion for you. Sir
You can Add this J setting in Your VPS Programming so user can set the retract values right from the VPS Page when they creating the Taping Cycles. Thank you 😊
Now thats cool! Daaam!
Super sir
Nice
how do you protect tarot breaking ?
I tried this for a while but I found it kills your taps. 2x at the most.
Thanks for the real world feedback!
Spidal oriantaion missing problem
Before taping after
Why 4 !? && 120 ? Are those precise numbers ? Or just an example
Does this trick work on a Haas lathe with ridged tapping?
Depends on how many Ruffles (R) you feed the machine..)
I haven got this setting in my ST30Y. Whats can i do?
Do okuma able to set this ?
Sir haas machine rigid tapping not enble parameter please help
Do you need this kind of machine from Taiwan?
Is this for taping in cnc lathe( fanuc control)
Do you need this kind of machine from Taiwan?
Buen día, tengo una pregunta habrá algún setting, cuando barreno se puede disminuir la velocidad del rapido de la máquina, esto es con brocas muy largas?
Oscar - We can turn on Setting 10 LIMIT RAPID AT 50%. This will slow down all rapid moves. To slow down Rapids on just one drilling operation, we would have to program all of the moves with a G01, so we could control the feedrates with an F-Code. We always have the Feed and Spindle Override buttons, but I know that isn’t what you were asking about. I hope this helps. - Mark, Haas Tip-of-the-day
How to change tapping retract speed 4 to 1
Goody 👍🏾
How to deep hole drilling with out peck .
7 mm hss twist drill
Running the power off
Hole center the how to remove tap
so in order for setting 130 tow work. u have to have a j value?
Ariel - Nope, the J value is optional. The machine will use the value in Setting 130, unless you use a J value on the tapping line, then it will use your J (temporarily) instead. Thanks for the comment. - Mark, Haas Tip-of-the-day
Can you do this on a TM2?
Do you need this kind of machine from Taiwan?
Sir where is this setting in fanuc system
Do you need this kind of machine from Taiwan?
is this method works on fanuc control
Do you need this kind of machine from Taiwan?
@@力勁機械 no im not capable of that bc im working for someone...
People, please tell my, why in uk and usa people write number "1" like "I"? It makes probably a loot of mistakes. it is true?
I don't understand why they are putting the programmer's load onto the machine operator. A faster retract rate is set during programming.
You should turn on setting 133 :-)
+MrMetalShaper U a troll :D
+Tommi Honkonen only if you want me to be :-)
my suggestion for turning on 133 wasn't a troll comment and meant sincerely. Because if for some reason you have to create a peck tapping operation you would need this on. If you decided you needed to tap your holes deeper you can run the same code and not screw up the threads. I would just leave it on all the time, it can't hurt.
+MrMetalShaper The sad part is Haas decided not to make a simple peck tapping macro by adding a Q and/or P value, and instead require long drawn-out code additions.
+atomkinder67 I agree. it would be nice if they could create a peck tap code.
setting 198 is a way better :)
+PetSize gaming
Agreed, setting 198 is great! We have a map of available Setting 198 background colors on the Haas DIY site: diy.haascnc.com/reference-docs/background-color-reference-table. Now you can match your screen to your favorite team's colors! Enjoy.
come si usa il g68
Antonio - We made a video on G68 Rotation. You can watch it at: th-cam.com/video/5j8GJGqLztU/w-d-xo.html
Thanks for the comment. - Mark, Haas Tip-of-the-day
gota love this guy...''how not 2 get screwed out of time''...ha....ha...yup..love there machines....I need more tips like this 1...will shave years off of u'r life....
Sir how to use this function in fanuc controller
It's not possible. This function is only for Haas control
Do you need this kind of machine from Taiwan?
ебать инновации...рассказывает будто в космос ракету сделал сам и запустил
I guess you can teach an old dog new tricks booyaa
Nice tip..) I'd tap that !).... way XD but then I read the comments.. how about an update for 2023?) and how about some recommendations for different materials? Don't worry, I'm hooked and will not unsubscribe.. Long live american machinery! P.S. Could use a new Haas T-shirt..)