This is a fully detailed video on the does and don'ts when is comes to using sealer for paint. be sure to watch the entire video to get all the important information.
I like your very good explanation of when and why you want to use a sealer, plus darker sealers for darker colors. I know car painters that always go with a light gray for all colors.
Interesting video Mr Teacher Sir😁 this would have been very useful a few months back when I was have bad dieback on the final finish but only when using sealer, I found a brand of sealer that I could use but of course it was totally user error as now I can use the other brands of sealer that was giving me the problems, it was just me over applying it putting it on to heavy and thick. The sealer in my scheme is tintable by adding 2K gloss colours to it so I'll be using that again when my current one is used up, thanks for all your videos Mario I have learnt so much from you and Brian👏👏👍John UK. Here's some 🍎🍎for teacher🥰😂
Hail up Mario. Can you kindly cover the preparation process involved with colour changes? I would really appreciate it. Thank you. Also, Mario, when do one use solvent cleaner as opposed to water-based cleaner? Cheers bredrin.
Bless up Francis. I’ll see what I can do on the color change process. The only real difference is that the water will give you a deeper clean. I use both, water first and then solvent.
I need to paint the rear bumper on my 07 vibe and do you think I should use a sealer before the new base coat or will a good scuffing be sufficient? Thanks
Once on the car I scuff it up with a grey scuff pad and clean with solvent cleaner. I’m using solvent base paint btw. I usually wait until the next day to do this tho.
So it’s exactly as you said one requires hardener and one don’t. As for when to use which that would depend on your time frame. Due to the fact that the 1k dries faster.
1 thing to keep in mind is that not all sealers are made the same. Ive used RM sealer(not the Adpro) for years and its garbage, does not go on smooth at all, the RM Adpro sealer is much better, While the Cromax sealer goes on super smooth and never had any issues with it.
Hi mario!. How about if spraying the whole car same color, does it always require sealer as well? Usually if its the same color, we seldom use sealer due to the color already the same coverage.
I am not painter but i am trying to repaint my car. At timemark 4:00 i see little spots that are shiny on the fender panel, is this enough sanding to paint over? Ive been doing 400GRIT DA until i see not gloss left. Im asking because now im thinking im doing extra work.
It’s better to sand out all the gloss on the body lines and the edges will look a little shiny because you don’t want to burn it especially if it’s a blend.
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
I like your very good explanation of when and why you want to use a sealer, plus darker sealers for darker colors.
I know car painters that always go with a light gray for all colors.
great video, thank you
You’re welcome
Interesting video Mr Teacher Sir😁 this would have been very useful a few months back when I was have bad dieback on the final finish but only when using sealer, I found a brand of sealer that I could use but of course it was totally user error as now I can use the other brands of sealer that was giving me the problems, it was just me over applying it putting it on to heavy and thick.
The sealer in my scheme is tintable by adding 2K gloss colours to it so I'll be using that again when my current one is used up, thanks for all your videos Mario I have learnt so much from you and Brian👏👏👍John UK.
Here's some 🍎🍎for teacher🥰😂
Thanks John. you’re awesome! Better late than never right. I’m glad you got that problem fixed
Blessings mario
Bless
Hail up Mario. Can you kindly cover the preparation process involved with colour changes? I would really appreciate it. Thank you. Also, Mario, when do one use solvent cleaner as opposed to water-based cleaner? Cheers bredrin.
Bless up Francis. I’ll see what I can do on the color change process. The only real difference is that the water will give you a deeper clean. I use both, water first and then solvent.
I need to paint the rear bumper on my 07 vibe and do you think I should use a sealer before the new base coat or will a good scuffing be sufficient? Thanks
I recommend sealing. That way your paint doesn’t flake off in a few months
How do you prep the outside of the door once on the car? Sand and clean with waterborne cleaner on the basecoat?
Once on the car I scuff it up with a grey scuff pad and clean with solvent cleaner. I’m using solvent base paint btw. I usually wait until the next day to do this tho.
Whats the difference between 1k sealers and 2k. I know one takes hardner but when do I or don't I wanna use one over the other??
So it’s exactly as you said one requires hardener and one don’t. As for when to use which that would depend on your time frame. Due to the fact that the 1k dries faster.
1 thing to keep in mind is that not all sealers are made the same. Ive used RM sealer(not the Adpro) for years and its garbage, does not go on smooth at all, the RM Adpro sealer is much better, While the Cromax sealer goes on super smooth and never had any issues with it.
Hi mario!. How about if spraying the whole car same color, does it always require sealer as well? Usually if its the same color, we seldom use sealer due to the color already the same coverage.
I think I rushed this video. But you only need sealer when spraying new parts. Or if you have too much burn through and you don’t want to work harder.
@@mariopaintclass6091 yeah thats what i thought too. 👍
I am not painter but i am trying to repaint my car.
At timemark 4:00 i see little spots that are shiny on the fender panel, is this enough sanding to paint over? Ive been doing 400GRIT DA until i see not gloss left. Im asking because now im thinking im doing extra work.
It’s better to sand out all the gloss on the body lines and the edges will look a little shiny because you don’t want to burn it especially if it’s a blend.
@@mariopaintclass6091 thx Mario
You are not close enough to to your microphones
Quite the opposite it’s directly on me It seems my microphone got adjusted without me noticing.
@@mariopaintclass6091 I am pretty sure you do not connected to the camera, cause it has such a reverb that it is likely the camera's mic is on.
@@Gegsite my apologies
@@mariopaintclass6091 No problem, still Super content!
@@Gegsite thanks