My last few projects have been nothing but orange peel so I had to figure out what was wrong, after this video I figured out everything I was doing wrong.painted a roll pan for my truck today as a test panel before I jump on my truck again (yes this is going to be the second time I try and paint it) and the pan came out awesome, really hope I can replicate the results from today on the rest of the truck.
Just make sure you keep that gun moving, and have the right psi , I have also added a little more reducer to thin the paint out and . The key is to take your time and don't put too much paint on your panel in one pass small droplets and just build it up
Same. I’m fixing to tackle my first big project (wreck repair on my truck courtesy of my wife) and have found you guys to be absolutely invaluable as a beginner
This is a great video. I worked in an auto paint shop when I was 18. I'm 62 now and I've never seen how to use a spray gun explained so clearly as you have done. My hats off to you Sir.
Brian, I have watched several videos on how to set up a spray gun. This is the only one that has made it really clear to me. I thank you for that! I bet your school class excels! Again, thanks for another outstanding video! Phillip Hall
Im nearly ready to paint my first car after 3 yrs of restoration. Your set up technique is on track as to what I was doing but your in depth tutorial has helped me immensely. Thank you ....
Brian, I just wanted to tell you: I watched this video twice last night, set up my gun (THE INTERWEBS HATE IT) today based on your instructions and shot my trunk lid this morning. The paint laid down fantastically well! The only imperfections were via prep, not sprayer. Tonight, after garage temps get out of the 90s, I will apply the clear with just a touch more pressure. Thank you again! Brian
Brian, I just wanted to say thanks, the more I watch your vids, the better I understand the overall concepts, and my projects keep getting better and better. The old school learn by fire methods don't produce as well despite embracing them for years. It goes to show that just because you've been doing something for years doesn't necessarily mean you've been doing it right, or truly understand what's happening.
Thanks for this. I don't paint cars, but use HVLP guns in my woodworking projects (paints, dyes, sealers and clearcoats), so this information is excellent for woodworkers as well. I needed a quick refresher after not having sprayed in a couple of years.
Really appreciate you taking the time to go over the details here. I'm a novice at spray gun painting and thanks to you I just made my boat consoles look brand new! Cheers!
This setup worked great with my lvlp gun. There are no recommendations for how to use a paint gun in instructions and this gave me great results for my first paint job.
Thanks for such a well explained introduction to setting up the gun. As a former woodwork teacher, I have to say that I'm very impressed with your work. (And just saved this video for future reference.) :-)
Thank you for such an excellent overview Brian. You explained everything brilliantly - and the fact you went into the actual technique and discipline behind it was even better. You've inspired me. I'm going to order a 100L air compressor and a few HVLP guns and test out my newfound knowledge. On my sisters car first though 😉
Love your motto: "Don't over think it, it's just paint". I fall right into this category and find the over analyzing exhausting, while that physical paint application turns out fine! Great video, and Hi from Australia.
Thank you so much for this video. I am planning on spray painting some cabinets that I just finished building and thanks to you, I will be going in doing this project a little more confident seeing that I have never used a paint gun before. Fantastic information.
your a good teacher Brian your knowledge is priceless and your teaching is spot on im 62 been a painter all my life in many different fields .never done automotive but like you say its just paint don't over think it.
Thanks for the easy to follow guide, great tutorial and I love the chart, I’ve found it most useful in setting up my gun for my first time using a spray gun! Thanks for giving me the confidence to give it a go.
I have to say, its been almost 50 years since Ive painted. Using acrylic laquer because Im spraying in my garage and looking for driver quality. Sprayed some primers and came out ok, just knew it could be better. After looking at your video, I sprayed primer on my roof. It came out so much better, my fluid adjustment was perfect with very low overspray. Thank you for the tips!
Brian, I so much appreciate you taking the time to teach. I haven't painted since the 80s (old acrylic enamel days) ha! Things have changed so much every time I watch you it's a learning experience. Im restoring my 67 Fastback and of course i plan to refinish myself, down the road so I watching and learning. thanks for all you do.
Wow! The Gods have aligned the stars in having me stumble upon this video, just as I am embarking on correcting my, new to me, 2012 Lexus CT200H with all its cosmetic faults, e.g. bump & grind parallel parking, front & rear bumpers, crap resprayed front passenger quarter panel and assorted door dings. I call this "urban patina". Practicing everything from chip repairs, panel repaint, paint correction on this car before restoring my 88 Porsche 944S. Your video adds to my confidence. Greatly appreciate it!
Hey Brian. Your vids are motivating me to start doing my own auto paint shop. I'm a beginner. But i want to know as much as i can. Your vids are very helpful.
I watched three other videos with similar content before I arrived here, and now (and ONLY now) it all makes sense. Thank you for taking time to put this together and help out a lot of people!
This is hands down, by far, the best video available to master your spray gun with!! This is third time I come back here to it to watch it again. Thank you so much for this!
I been sayin for years somebody needs to do auto body and paint consistently on youtube. Your a legend for this man. Your explanations and detail is literally perfect. I might actually give it a shot with some stuff on my rx7, you've given me hope. I have A whole library of videos to go through now. thank you dude.
I know I'm 2 years late to the party but I also wanted to say thanks for this. I'm getting into guitar refinishing using spray and trying to work out where to start/skills to practise etc. I know that there will be a lot of learning by making mistakes but videos like this are very helpful. Thanks again.
Awesome channel, so good without someone screaming or acting like a smacked ass and putting the right amount of repetition in so it doesn't clog anyones brain but a smooth transmission into the correct workings. Just subscribed.and THX.
Thank you bro I started spraying again...took 7 years off n now because of you I did my brothers mustang at his house it came out beautifully....a few runs that were wet sanded out but came out good..thank you
I have watched your videos on how to set up your paint gun. Amazing! I decided to paint my car and learned a couple things. One thing i found out the hard way was using rubber gloves. I was painting along and then the sweat just ran out of the glove and down the new paint. Second thing I found was follow the tech sheet for the paint. This single stage paint required 35-45 psi and had the gun at 25 psi and the finish was orange peel. So after waiting a day I sanded the whole car down. I decided to try just doing the front bumper. Sprayed it at 40 psi and it came out amazing. Now I can attempt the rest of the car. Thanks for your videos
Brian you have brought me back into the fold. I stopped painting for years, but now i am taking on new little projects and i am reall enjoying it again thanks.
I have been teaching Collision Repair for 27 years on the high school level. Fantastic job here on this video. Most you find have a problem in one way or another. Lighting, audio, the presenter talks too much, poor view of the work being done. You really have this down. While we are in quarantine I have been looking for good videos that I can use to help my students and supplement as our only alternative is on line learning. They don"t want to just hear me. I spent hours looking for good videos on this topic. Yours is professional and informative! Thank you. I am hoping you have other videos too!
Thank you so much for this video. I'm a hobbyist who purchased an Iwata LPH-80 gun to paint high power rockets. I was really struggling with gun adjustments and getting a decent paint result. Your video (along with the gun cleaning video) made a HUGE difference in my paint finish results. Thanks again!
Learned a lot about how to set up my gun buy your chart am just starting to paint cars I have. 5 hot rods to paint of my on I build a nice paint shop got big compressor watching you I can do this thanks man taught me a lot thanks
you dont know how much your video helped me , i bought a devlibiss gun and startet painting my scooter 2 weeks ago, the 1k base layer was pretty good, but with 2k i had serious problems, it looked terrible, and i couldnt figure out what i am doing wrong, i tried more thinner, more air, less air, it was a mess. today i tried what you are showing, pull it and than tight the screw, i put the compressor to 6 bar and regulatet the gun to 2 bar and it worked perfect, really smooth professional looking finish, im so thankful, nobody could explain me what to do, but you are doing it so detailed and i just wanted to let you know how precious your videos are, sry for my english, tried my best, regards from germany!
Hey Brian Anthony here I've been watching your videos for a while now and was called in for a job To pay the car for a test to see if I can paint I had no idea what I was doing until I saw your videos and then I sprayed the car and actually got the job thank you so much for everything
What a great teacher. I really appreciate how you address things that a beginner might not know but you already know so we’ll it’s second nature to you. That’s a great skill.
Thank you for your demonstration. I'm about to start a project on a 61 Karmann Ghia and it will be my first time painting with a gun. Your explanation was exactly what I needed to hear for adjusting the spray gun.
This is a great tutorial. The problem I have is that I paint a car about once every 10 or 15 years. Each time I have to learn to set up the gun again. It is really hard to spray enough material through a gun to get it right without wasting all the material. In the past I have "practiced" with the primer coat. With this information, I am hoping I can at least get a good starting point and keep some sort of track of the adjustments. I have an old Craftsman gun (in really good confition - I take good care of it), but they dont make the manual for it any more so I think I will try the 22 psi to start. Thanks for a lifesaver video.
I like the way to tell everything make clear crystal sense of doing paint job. I watch every video 2 3 times to make sure I learn better, Thanks for making videos and making our lives easier, Cheers
I’ve gotten great results using the HF spray gun. Set the pattern knob at 3/4 open and the volume at 3 1/4 open. This guy is a pro, I’m not, but like I said. I‘ve had good luck with those settings
I've just found your channel and I love it. You explain it so even the novice can do it. I've decided that I am going to pait my 1973 fiat. I can't wait to apply your tips.
Dear Brian, with the help of your videos, I was able to spray paint a 2K water-based polyurethane varnish over a homemade frame for a picture. Of course, I was using only a very basic spray gun (46€) and a very small compressor (24 liters of volume), but the end result was good. Thanks.
Well explained basic controls to spray gun that I tried to learn from painters without any success, for first time an excellent demonstration in short time lecture. great job
Best guid iv ever seen. Wish i could show you how good my panels came out after watchinh this. I was always trying to match the settings instead of reacting to whats happening.
Should get a Netflix deal for this channel. That great. Im 95% closer to painting my car thanks to your videos. Other 5% is to clean up my garage to make room 😅
Nice job making it look simple. I was sitting here following with gun in hand, no paint or air. Now let me try to duplicate what you did. Excellent instruction. Thanks
New here; Brian you have a gracious and easy manner about you. Outstanding on explainations referencing the settings. Just outstanding, Good stuff big guy and I look forward to checking out your other videos. Thank you, good job. johnny o
Hey Brian Anthony here again hey I've been painting for years but I've been doing it all wrong my setup my airflow everything was just totally wrong so again thank you so much for everything I will continue watching your videos and learning more thanks a lot bro you have a good one
I've recently only started watching your videos...I must say I'm very impressed with your teaching and skills...Thank you so much for sharing your knowledge..awesome!!
To support the channel and purchase Official Paint Society Shirts and Decals:
Paintsociety.bigcartel.com
Brain how can I buy the shirt, for paint society, b.amarjit@yahoo.com
I just bought a GTI Pro and was wondering if i can buy another to shoot clear. So one for Base coat and the other for Clear.
‘Q
Y
.)
U are really doing a great job sir
Love your work
Wow a guy that actually knows how to translate what he's teaching well ,great video
My last few projects have been nothing but orange peel so I had to figure out what was wrong, after this video I figured out everything I was doing wrong.painted a roll pan for my truck today as a test panel before I jump on my truck again (yes this is going to be the second time I try and paint it) and the pan came out awesome, really hope I can replicate the results from today on the rest of the truck.
How it come out
Same happened with me my friend, I painted a entire semi truck, nothing but orange peel, had to sand everything again and re painted it.
Just make sure you keep that gun moving, and have the right psi , I have also added a little more reducer to thin the paint out and . The key is to take your time and don't put too much paint on your panel in one pass small droplets and just build it up
How'd the truck turn out?
@@jadorifficguessing not so well since this was over a year ago and no response
I like how you teach not only the method but the discipline behind it.
Thank you for noticing !
Same. I’m fixing to tackle my first big project (wreck repair on my truck courtesy of my wife) and have found you guys to be absolutely invaluable as a beginner
Brian, you are a good teacher and that is coming from someone who has been teaching for 40 years. Well done!
This is a great video. I worked in an auto paint shop when I was 18. I'm 62 now and I've never seen how to use a spray gun explained so clearly as you have done. My hats off to you Sir.
Brian, I have watched several videos on how to set up a spray gun. This is the only one that has made it really clear to me. I thank you for that! I bet your school class excels! Again, thanks for another outstanding video! Phillip Hall
My kids only love me when I’m gone and they have a substitute teacher ha ha. Glad this video was clear and concise.
Totally agree.
Me too!
I second that. There are some great videos out there, but this one actually taught me!
Im nearly ready to paint my first car after 3 yrs of restoration. Your set up technique is on track as to what I was doing but your in depth tutorial has helped me immensely. Thank you ....
Brian, I just wanted to tell you: I watched this video twice last night, set up my gun (THE INTERWEBS HATE IT) today based on your instructions and shot my trunk lid this morning. The paint laid down fantastically well! The only imperfections were via prep, not sprayer. Tonight, after garage temps get out of the 90s, I will apply the clear with just a touch more pressure. Thank you again! Brian
Awesome feedback!! Glad to hear !
Brian, I just wanted to say thanks, the more I watch your vids, the better I understand the overall concepts, and my projects keep getting better and better. The old school learn by fire methods don't produce as well despite embracing them for years. It goes to show that just because you've been doing something for years doesn't necessarily mean you've been doing it right, or truly understand what's happening.
Thanks for this. I don't paint cars, but use HVLP guns in my woodworking projects (paints, dyes, sealers and clearcoats), so this information is excellent for woodworkers as well. I needed a quick refresher after not having sprayed in a couple of years.
Dude,I've watched so many videos and this is the best one I found that really explains how to tune and use the gun,thanks man.
Dude you explaining what wide open actual means is perfect. Most people thing its just unscrewing the knobs all the way regardless of trigger pull.
Really appreciate you taking the time to go over the details here. I'm a novice at spray gun painting and thanks to you I just made my boat consoles look brand new! Cheers!
This setup worked great with my lvlp gun. There are no recommendations for how to use a paint gun in instructions and this gave me great results for my first paint job.
Thanks for such a well explained introduction to setting up the gun. As a former woodwork teacher, I have to say that I'm very impressed with your work. (And just saved this video for future reference.) :-)
Excellent help and explanation on this. Thanks much!
saved and worth for subscribe! :D
Thank you my brother just just held a builder in Australia paint his caravan. Cheers mate. Jesus loves you. 👍🏻😎🇦🇺
Thank you for such an excellent overview Brian. You explained everything brilliantly - and the fact you went into the actual technique and discipline behind it was even better. You've inspired me. I'm going to order a 100L air compressor and a few HVLP guns and test out my newfound knowledge. On my sisters car first though 😉
Love your motto: "Don't over think it, it's just paint". I fall right into this category and find the over analyzing exhausting, while that physical paint application turns out fine!
Great video, and Hi from Australia.
Thank you so much for this video. I am planning on spray painting some cabinets that I just finished building and thanks to you, I will be going in doing this project a little more confident seeing that I have never used a paint gun before. Fantastic information.
your a good teacher Brian your knowledge is priceless and your teaching is spot on im 62 been a painter all my life in many different fields .never done automotive but like you say its just paint don't over think it.
Thanks for the easy to follow guide, great tutorial and I love the chart, I’ve found it most useful in setting up my gun for my first time using a spray gun!
Thanks for giving me the confidence to give it a go.
I have to say, its been almost 50 years since Ive painted. Using acrylic laquer because Im spraying in my garage and looking for driver quality. Sprayed some primers and came out ok, just knew it could be better. After looking at your video, I sprayed primer on my roof. It came out so much better, my fluid adjustment was perfect with very low overspray. Thank you for the tips!
Brian, I so much appreciate you taking the time to teach. I haven't painted since the 80s (old acrylic enamel days) ha! Things have changed so much every time I watch you it's a learning experience. Im restoring my 67 Fastback and of course i plan to refinish myself, down the road so I watching and learning. thanks for all you do.
Now I get it! Thanks for your video, I've been struggling along for a few months on my own.
This guy is a good teacher
Ive learned so much from him
He helps build confidence and motivation
Makes you feel like hes teaching you one on one
I've learnt more from these videos than 3 years of tafe in the late 1980's.
Shaun Smith guessing you are from Aus when you said tafe???
Wow! The Gods have aligned the stars in having me stumble upon this video, just as I am embarking on correcting my, new to me, 2012 Lexus CT200H with all its cosmetic faults, e.g. bump & grind parallel parking, front & rear bumpers, crap resprayed front passenger quarter panel and assorted door dings. I call this "urban patina". Practicing everything from chip repairs, panel repaint, paint correction on this car before restoring my 88 Porsche 944S. Your video adds to my confidence. Greatly appreciate it!
Your enthusiasm goes far brother. Thank you and your team for the vids!
I wonder how your Chanel doesn’t have a million + subscribers. You make everything so simple and easy to understand. You are a good teacher.
Hey Brian. Your vids are motivating me to start doing my own auto paint shop. I'm a beginner. But i want to know as much as i can. Your vids are very helpful.
I watched three other videos with similar content before I arrived here, and now (and ONLY now) it all makes sense. Thank you for taking time to put this together and help out a lot of people!
Thanks for these great lessons. I want to get started with painting like this soon
This is hands down, by far, the best video available to master your spray gun with!! This is third time I come back here to it to watch it again. Thank you so much for this!
Just painted my car in my garage. It was actually fun.
It is! Glad to hear that.
Gonna paint my xj, can’t wait
What size compressor did you have?
@@sexdrugsrocknroll420 rent the gas powerd one from Home Depot and Ull be good
@@KILLemZOMBIES man thank you I was seriously thinking of doing that at sunbelt rentals, good to know I can use ho e depot thats what I'll do
I been sayin for years somebody needs to do auto body and paint consistently on youtube. Your a legend for this man. Your explanations and detail is literally perfect. I might actually give it a shot with some stuff on my rx7, you've given me hope. I have A whole library of videos to go through now. thank you dude.
I’m honestly more scared than I was to begin with 😢
Pssy
😂😂
Pls, what it does mean pssy.... aaaa, part of a woman body.... "middle part" ..... I am an english beginner :-)
Lol
@@midwesternwelds1197Sit down...
I know I'm 2 years late to the party but I also wanted to say thanks for this. I'm getting into guitar refinishing using spray and trying to work out where to start/skills to practise etc. I know that there will be a lot of learning by making mistakes but videos like this are very helpful. Thanks again.
Awesome channel, so good without someone screaming or acting like a smacked ass and putting the right amount of repetition in so it doesn't clog anyones brain but a smooth transmission into the correct workings. Just subscribed.and THX.
Appreciate that. I’m glad I come across in a way you can appreciate the content.
Thank you bro I started spraying again...took 7 years off n now because of you I did my brothers mustang at his house it came out beautifully....a few runs that were wet sanded out but came out good..thank you
Awesome Ben!
Just stumbled across your educational videos, these things are great!!!! 👍
I have watched your videos on how to set up your paint gun. Amazing! I decided to paint my car and learned a couple things. One thing i found out the hard way was using rubber gloves. I was painting along and then the sweat just ran out of the glove and down the new paint. Second thing I found was follow the tech sheet for the paint. This single stage paint required 35-45 psi and had the gun at 25 psi and the finish was orange peel. So after waiting a day I sanded the whole car down. I decided to try just doing the front bumper. Sprayed it at 40 psi and it came out amazing. Now I can attempt the rest of the car. Thanks for your videos
Thanks for the video bro.. well explained just like a good teacher would do it!
Brian you have brought me back into the fold. I stopped painting for years, but now i am taking on new little projects and i am reall enjoying it again thanks.
I painted my friend's car! I set a prep date. I set a primer date. I set a paint date. Now my friend is setting a court date :(
Lol
Wow, one of the most concise, down to earth, commercial-free, experienced how tos I've ever seen!
PRAISES JESUS NAME ABOVE ALL
I have been teaching Collision Repair for 27 years on the high school level. Fantastic job here on this video. Most you find have a problem in one way or another. Lighting, audio, the presenter talks too much, poor view of the work being done. You really have this down. While we are in quarantine I have been looking for good videos that I can use to help my students and supplement as our only alternative is on line learning. They don"t want to just hear me. I spent hours looking for good videos on this topic. Yours is professional and informative! Thank you. I am hoping you have other videos too!
Thanks so much for sharing with them. It’s great to have learning of kinds from different platforms.
Thank you so much for this video. I'm a hobbyist who purchased an Iwata LPH-80 gun to paint high power rockets. I was really struggling with gun adjustments and getting a decent paint result. Your video (along with the gun cleaning video) made a HUGE difference in my paint finish results. Thanks again!
Learned a lot about how to set up my gun buy your chart am just starting to paint cars I have. 5 hot rods to paint of my on I build a nice paint shop got big compressor watching you I can do this thanks man taught me a lot thanks
you dont know how much your video helped me , i bought a devlibiss gun and startet painting my scooter 2 weeks ago, the 1k base layer was pretty good, but with 2k i had serious problems, it looked terrible, and i couldnt figure out what i am doing wrong, i tried more thinner, more air, less air, it was a mess. today i tried what you are showing, pull it and than tight the screw, i put the compressor to 6 bar and regulatet the gun to 2 bar and it worked perfect, really smooth professional looking finish, im so thankful, nobody could explain me what to do, but you are doing it so detailed and i just wanted to let you know how precious your videos are, sry for my english, tried my best, regards from germany!
I love these comments and helping people is what makes me happy.
Awesome video for all the hobbyist painters out there, nice to see a pro sharing the knowledge gathered over the years!
Thanks!
of all the people that does paint videos brian is the most direct knowledgeable...ty for making this and all your videos..much appreciation
I have just finished my apprenticeship and I never learned any of what you teach. This is excellent content very well done thank you!
Your teaching and discipline are second to none mate thanks heaps
Hey Brian Anthony here I've been watching your videos for a while now and was called in for a job To pay the car for a test to see if I can paint I had no idea what I was doing until I saw your videos and then I sprayed the car and actually got the job thank you so much for everything
Man that’s so awesome to hear !!! Congrats to you
What a great teacher. I really appreciate how you address things that a beginner might not know but you already know so we’ll it’s second nature to you. That’s a great skill.
Iv learnt more in 10 mins than I did in the aerospace industry in 10 years 👌 you rock ..thanks
Im just beginner.... now am confident to repaint my own car..... its not to late just learn....thanks buddy
Thank you for your demonstration. I'm about to start a project on a 61 Karmann Ghia and it will be my first time painting with a gun. Your explanation was exactly what I needed to hear for adjusting the spray gun.
Thankyou. I haven't painted any thing for years, I had forgotten so much a d now I am using a top loader gun so this video has been invaluable. Tim.
The best tutorial I have ever seen on anything, after watching this makes you want to paint anything, thanks my brother 👍👑
Extremely well presented. For a guy like me, who has never run a gun before, this is excellent!
This is a great tutorial. The problem I have is that I paint a car about once every 10 or 15 years. Each time I have to learn to set up the gun again. It is really hard to spray enough material through a gun to get it right without wasting all the material. In the past I have "practiced" with the primer coat. With this information, I am hoping I can at least get a good starting point and keep some sort of track of the adjustments. I have an old Craftsman gun (in really good confition - I take good care of it), but they dont make the manual for it any more so I think I will try the 22 psi to start. Thanks for a lifesaver video.
I like the way to tell everything make clear crystal sense of doing paint job. I watch every video 2 3 times to make sure I learn better, Thanks for making videos and making our lives easier, Cheers
The best video yet on setting up, getting ready to spray my truck, I'm sure I'm on right path.
I think your channel is great. Obviously you know what you’re teaching. This is the 3rd time I’ve watch this episode. Very informative.
I could not believe people would put a thumb down on your video when you explained the whole set so nice .
There are always haters!
BY FAR the best deluxe explainer of how to set up a gun. Now i finally get it. Thank you so much for this great service.
I’ve gotten great results using the HF spray gun. Set the pattern knob at 3/4 open and the volume at 3 1/4 open. This guy is a pro, I’m not, but like I said. I‘ve had good luck with those settings
I've just found your channel and I love it. You explain it so even the novice can do it. I've decided that I am going to pait my 1973 fiat. I can't wait to apply your tips.
Excellent clip. Straightforward and no useless repetition. Thanks
Dear Brian, with the help of your videos, I was able to spray paint a 2K water-based polyurethane varnish over a homemade frame for a picture. Of course, I was using only a very basic spray gun (46€) and a very small compressor (24 liters of volume), but the end result was good. Thanks.
Im in autobody school and i never fully understand how to set up a paint gun but this helped me so much so when i prime Thursday 🙏🏽!!!
Well explained basic controls to spray gun that I tried to learn from painters without any success, for first time an excellent demonstration in short time lecture. great job
Very Well-explained for us beginners…and by a real American who speaks good English. Getting to be a rarity on TH-cam
Excellent! It shows you’re very experienced and talented and love to instruct people. Thank you for sharing your knowledge and talent.
I’m so glad I stumbled onto this channel, dawg you are the real deal, a cool 🐱 and an awesome teacher. ✌🏼
Best guid iv ever seen. Wish i could show you how good my panels came out after watchinh this. I was always trying to match the settings instead of reacting to whats happening.
That’s awesome to hear your success
I managed a small shop here in Australia for a few years. After watching this i really wish i had picked up a gun and given it a go!
Finally an easy to follow and understand how to set a spray gun up.
Most clear and concise explanation. Your paint expertise is rivaled by your excellent video skills. Thank you sir!
So far you have the best instruction video . Thanks so much. GREAT HELP.
I’m gonna use a paint gun for the first time and this video answered lots of my questions 👊🏾
Should get a Netflix deal for this channel. That great. Im 95% closer to painting my car thanks to your videos. Other 5% is to clean up my garage to make room 😅
Thanks !
Nice job making it look simple. I was sitting here following with gun in hand, no paint or air. Now let me try to duplicate what you did. Excellent instruction. Thanks
That’s awesome ! True student !
New here; Brian you have a gracious and easy manner about you. Outstanding on explainations referencing the settings. Just outstanding, Good stuff big guy and I look forward to checking out your other videos. Thank you, good job. johnny o
Perfect explanation to a old beginner! Now I have to find the rest of your tutorials, especially base coat clear coat.
Man, You're a natural at teaching...Excellent job.
Great videos very educational. I am a Detailer and I just started learning how to paint and your videos have helped out a lot.
Glad to hear it
Hey Brian Anthony here again hey I've been painting for years but I've been doing it all wrong my setup my airflow everything was just totally wrong so again thank you so much for everything I will continue watching your videos and learning more thanks a lot bro you have a good one
I've recently only started watching your videos...I must say I'm very impressed with your teaching and skills...Thank you so much for sharing your knowledge..awesome!!
You are very welcome
I like how you explain what the adjustments does, and show the results of it! Really helpful for a amateur like me! Thanks!!!
We are shooting a RX8 two tone this guide helped us understand fanning to blend the silver into the blue!!
Many thanks Sir!!!!
Thanks for the training, 1st time user / painter pretty much thrilled in learning this trade.
Hello thank-you very much for the video!!!
I fully stripped & cleaned our work industrial siphon gun & used these guides. Sprays wicked now!
This is an important lesson. This and a good gun and good products properly mixed. Is important to get a good job
Wave my own watch list dedicated to spray with your videos only in it. So clear and simple breakdown in everything
This is the best video on TH-cam for paint gun setup
Excellent video, just the right info and none of the excess gimmicks. Easy to watch and very informative.