Fully restore old Japanese MAKINO milling machine |Restore and repair antique metal milling machines
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2022
- Hi! in this video we found and bought an antique Japanese MAKINO milling machine for $500. old and rusty engine and stuck gyroscope. but meet us antique restoration experts and we have successfully restored and repaired this makino milling machinemilling machine retoration
Fully restoration old Japanese MAKINO milling machine | Restore and repair antique metal milling machines
I hope you find something useful from this video!
I am very happy to receive your feedback, advice and suggestions to improve myself more and more
!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video have a good day. Don't forget to like and subscribe to the channel
Link subscriber
/ restorationittool
Link facebook
profile.php?...
Link twitter
/ mrthao18
#resstoration #resstore #millingmachine - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMSL SEA W1D4 | Summer | ละเอียดทุกเม็ด เพื่อเข้าไปเก็บคะแนน](http://i.ytimg.com/vi/W6i3u5r1Vbw/mqdefault.jpg)
Thank you for sharing this. It's nice seeing old tools brought back to life instead of being treated like garbage. Serious respect to you for being able to remember where things go on the reassemble of this nice old milling machine. Would've taken me forever to remember where things go.
I was yelling at you every time you used a metal hammer- especially on that bearing. Good job getting it running!!
Me too.
1. Don't drive bearings into a housing by the inner race. Into a housing drive against the outer race. Onto a shaft drive against the inner race.
2. Your locktab should be between the spanner nuts and beveled side of spanner always against the bearing.
3. You need some sealant around the drip edge part of the pan.
4. Don't drive a pulley on a motor- either heat the pulley so it is a slip fit or stand the motor up on a socket against the other end of the armature.
5. Safety glasses- your choice, but good idea if you want to keep working on machines.
@@restorerestoration4705 ....mmjñ9
Great work. Looks like a well made mill.@@gianluigivaccaro6776
6 , He's done that ! Already ! So it's too late ! Now !
@@davidwillard7334 👌👌👏👏
I like the way you work very professional and you don't need to be Rush in your work this machine have many part and a lot of work you can do it in 2 or 3 video so we can enjoy your great work . Have a great day brother
Congrats R&R on taken apart, clean&paint, and rebuilt the Makino Milling Machine. great job..
SALUT PRIETENE. SPOR LA TREABA.DRĂGUȚ VLOG.PA.PA BUNĂ TREABĂ. PA.PA.PA.
Meet ! the New MILLING! MACHINE !! Same ! As ! The ! OLD ! MILLING ! MACHINE !!
I have a Cincinnati it's a good machine it's sitting in my garage I haven't used it yet but some
re4
Very very beautiful, thanks for sharing my friend 👍👍👍👍👍👍
thank you
This is very good size for a small workshop milling machine. It looks well solid and well built. Nice job with the restoration.
I enjoy watching this videos but where they find all this machinery
I’m always amazed at how organized you are! I love old machines especially theses old mills you are very good at your craft sir. Thanks for your videos 😊🙏
thank you
😄😄😄
As someone who works in a very small shop I am very jealous of those with room enough to organise on the fly. Everything has to be pre-setup for me.
I am really glad you shared this video. It was very interesting. Really like the complete tear down and restoring. Glad to see it brought back to useful again. Looking forward to your next project.
Wow,wow, Great to see and great that all the recycled machinery is working again. Don't buy anything new, just get started. It motivates to start recycling devices ourselves.
The things I buy for restoration are called waste
@@restoration-restore-repair The people who throw it away don't think. Just want to have, to have and to have.
In this way, as you do it, we are already saving nature.
@@adstoop7885 Only people like us who are poor have machines like this to use
@@restoration-restore-repair Poor people use their intelligence and rich people only use the walled. Who's the smartest here?
Thats a nice little mill there, great video. PS thats a Woodruff cutter not a face-mill ;)
I love restoring vintage machines have 7 lathes and a Sheldon horizontal mill can't beat there quality
A fascinating build, looks like a very compact and capable machine for the workshop, well done.
Time and effort played the role here. GREAT JOB DUDE !!!!!
Nice job bringing that old machine back to useful life! The spindle bearings sounded a bit loud? Maybe it was the style of bearing or were the worn and pitted? Either way, that old machine will be useful to someone.
Also, another vote for you to wear protective eyewear. Also, wearing gloves when working with chemicals so your skin does not absorb them. Most of those chemicals are toxic and will cause cancer down the road. None of us want that.
Keep up the good work on your restorations!
And it would not matter None !
The good advice always a good think to help people to be better.
FLUMINENSE Olé Olé Olé Olé.
Nice job
thank you
Nice machine! Great restoration.
🔧✌️
I would love to have a small vertical mill. My dad had an Enco. Amazing useful, even for woodworking.
PARABENS PELAS TUAS RESTAURAÇÕES, TU É MUITO COPETENTE NO TEU TRABALHO,NÃO CANÇO DE ASSISTIR ....SOU BRASILEIRO E DO ESTADO DO RIO GRANDE DO SUL ...GAUCHOS.....👏👏👏👏👏👏👏👏
Wonderful job cleaning and restoring the milling machine to working order. I bet that took a lot of hard work and a lot of time. Well done.
Id love to have this mill.
Serious beating the bearing with a metal Hammer!
Great work. Looks like a well made mill.
thank you
Good job 👍👍👍Thank you for sharing. 🇨🇦
thank you very muck
Black gloves.... very eccential!!!!
good job! I was very excited with your machine- repare
thanks for sharing.
As an electrician I have a lot of experience from maintaining electric motors. These are the most important things you need to check:
1. The insulation resistance between the electric windings and between them and the ground.
2. The resistance of the windings
3. The condition of the bearings.
Also the condition of the shell and flanges as well as the straightness (balance) of the rotor need to be checked.
Normally only the bearings are worn out and need to be replaced. You know that if the motor sounds like a sound dampened stone crusher already when you turn the shaft by hand. I bet this motor does it.
I can't see that anything of this has been done. Cleaning and painting isn't proper maintenance. And you NEVER mount bearings by hitting them with hard steel tools!!! The best would be to press them onto the shaft and not hit them at all.
Great cleaning and repaint
Complimenti!! un ottimo lavoro, bravo!!👍🖐
Nice little mill! Great job!
Muy buen video saludos abrazo grande desde Argentina 👍 🤗
thank you
Well done! Thank you for sharing. Liked and Subscribed.
Great job
thank you
DRO and maybe some power feed, nice little machine ;-)
excellent vid excellent colour scheme
thank you
awesome re build mate you are brilliant the things you do are great to watch great video all the best
I am surprised it came apart so easily. It looked like it has been sitting for a very long time. The inside was very clean and dry. Did you scrape and flake the ways and gibs,I couldn't tell. You did good putting it back together, no spare parts I hope.
Awesome machine, well done.😊
Buen trabajo, felicitaciones. Good job, congratulations. From Colombia
Great job again Peter
Отличный станочек!
Hammer and a screwdriver on locking collets- make an adjustable c spanner instead of smashing them up
Nice and clear job, when i finished my lathe restoration, i will also do it for my milling machine :)
Very good👍👍👍
Nice job, congratulations :). I must say thay i was quite suprise seeing all electric components "Made in Poland", I was not aware that my country was selling components to japaneese machines. Thanks for the video.
Muito bom trabalho 👍👍👏👏
Отличная работа 👍
Using slot cutters for face milling?Ive never tried that before😆
bearings killer....
А где собственно реставрация? Реставрация подобного оборудования подразумевает восстановление всей геометрии станка, восстановление всех направляющих станка.
Реставрация у Негоды!
@@user-bomb. Негода из фильма ? так он негодяй !...
@@maikl6920 Это известный блогер. Игорь Негода!
Станок просто огонь 🔥🔥🔥🔥
Хочу такой
Заметили, коллега, станок то вообще без пробега, и как он снимает закрытые подшипники промежуточного вала? Какая то постанова!
Great work my friend. You are very knowledgeable, and intelligent person 🙂👍
are you kidding????? a knowledgeable and intelligent person doesn't hit bearings with hammers.
Молодец 👍💋
Dude took this whole thing apart with a flat head screw driver, an Allen wrench and a hammer. Damn.
Had tapered roller bearings just for the handwheels!!! Lucky if you get thrust bearings these days!!!
Good ii boss 👍👍😊😊😍😍
Very nice. Wish you had a better milling tool though! Very big bite for that small bit. There would have been a lot less chatter with a cutter that was worthy of what that machine can do. Big job on all of that cast iron. Well done!
Cannot believe he’s using the same bearings.
The new bearings he did use are ruined by hitting the centre race.🫣🤦🏻
Interesting, nice little vertical or horizontal mill. Too bad it didn't come with the horizontal parts. Just out of curiosity, what taper is the spindle?
Bác này người Việt à ?
பெரிய வேலை. நன்றாக தயாரிக்கப்பட்ட ஆலை போல் தெரிகிறது.
Nice
Awesome job thanks for sharing this 😀
thank you very muck
made me flinch quite a feww times (the way he took things apart the hammering on the bearings , using a grinder to clean the ways etc , it looks to have been a pretty good machine though it was missing some of the horizontal milling atachments
Why the fire engine red on certain parts?
Execelente trabalho parabéns. Brasil
Bravissimo.
В эфире рубрика-хотели реставрацию))!!!-получите хуетацию....))))
Not sure removing parts for cleaning and painting would be called restoration. Never saw parts replaced with new, checking of components for wear or windings tested.
Не проводилась поверка стола и направляющих. Короче для сельской местности пойдёт.
Nice renovation. I have a question, if it is a Japanese milling machine, why does it have an electrical installation and drivers from APA TOR and Made in Poland markings? Is it possible to upload a photo of the nameplate with the model, production date and manufacturer's designation?
POLSKA frezarką FWE 16, widocznie robili na export do Japonii, a tamci pchali jako swoje.
A limpeza ficou ótima, mas a recuperação nem tanto. Para colocar o rolamento foi realizada uma força no centro, este rolamento perdeu a metade da sua vida util.
Realizou a pintura externa e uma pena não foi realizada a pintura interna.
Achei muito bom o desmonte, a pintura externa tambem ficou boa.
Olá amigo que trabalho fantástico, parabéns!!!
Grande abraço daqui do Brasil a todos aí!!!
Hi, this milling machine is from Poland. This is FWE 16 (Ponar-Remo) 😃
Też mi się tak wydaje
裝軸承居然給我敲內圈 (錯誤示範)
good job
thank you
@@restoration-restore-repair
25:27.Исплртил подшипник.🙄
Супер! Молодчина парень! Лайк 100%.
😘😘👍👍
Чёт плоскости не проверял, шабера нет в руках, какой то бутофорский ремонт :))
проверит. главное работает. остальное дело наживное.
Good on him for trying BUT I’m amazed this went as well as it did considering he fucked the bearings, water washed like that, painted badly, used the wrong cutter for that operation, and used an engine hoist wrong.
I would not be surprised if this is what they taught people to do in the grizzly factory
Derust and paint
Por favor siempre usa lentes.
Excellent Work 👍
the Z feed needs a retrofit.... bevel gear with shaft bolted right to the chip pan
Por um tempo admirei o seu trabalho, mas observando um pouco mais, vejo que vc só pinta os equipamentos. Não troca rolamento, não troca bucha, eixo danificado, rosca danificada. Qual a finalidade? Ganhar liks? Deveria fazer um trabalho melhor quem sabe assim ganharia mais seguidores, já que este é o intuito.
i liked it, but you should learn how to install bearing the correct way.
la pintura tapa todo así dicen algunos..... no se debe pintar sobre partes que están oxidadas supuestamente limpias porque el oxido sale de nuevo y no vi que le aplicara ni siquiera un producto para eso es una lastima desarmar todo para medio limpiar y tapar los detalles con pintura......😔
Good job 👍
thank you
Where is the grease on the bearings
Bom trabalho
thank you
Come on man, green and red on every restoration?
Con này a mua giá bao nhiêu v a
этот станок долго не поработает. ни одной плоскости не смазал маслом. на сухую быстро заклинит.
А забитые как попало подшипники! Это же надо, без всяких оправок, прямо по внутренней обойме молотком! Точность у станка будет запредельная.
So he cleaned and painted it. Did nothing to correct any accuracy issues or flatness, and painted mating surfaces. Most likely useless but looks nice.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍